Kenny Audio
- 1 Coleman St, The Adelphi,, #03-25 Singapore, Singapore, Singapore
- +659877707
Featured Products
-
Mark Levinson 331 Power Amp
• Overview – The Mark Levinson 331 Power Amp, released in 1995, is a solid-state Class AB stereo power amplifier delivering high-current performance with exceptional refinement, designed for demanding high-end loudspeaker systems.
• High-Current Design – Built with a massive linear power supply and robust output stage, the Mark Levinson 331 Power Amp delivers authoritative bass control, wide dynamic range, and effortless drive across low-impedance loads.
• Sonic Performance – The Mark Levinson 331 Power Amp is renowned for its smooth, transparent presentation, offering detailed midrange, extended highs, and excellent soundstage depth without harshness or listening fatigue.
• Specifications – 100W per channel into 8 ohms, 200W into 4 ohms, Class AB topology, fully discrete circuitry, frequency response 10Hz–20kHz, high damping factor, substantial current delivery for speaker control.
• Dimensions – Approximately 483 mm (W) × 140 mm (H) × 430 mm (D), featuring a full-width chassis designed for optimal heat dissipation and stable integration into hi-fi racks.
• Weight – Approximately 23–25 kg, reflecting its oversized transformer, heavy-duty chassis, and premium internal components designed for long-term reliability and performance.
$ 2,198.72Mark Levinson 331 Power Amp
$ 2,198.72 -
Mofi Electronics x Fender Precisiondeck Turntable
• Overview – The Mofi Electronics x Fender PrecisionDeck Turntable, released in 2022, is a belt-drive audiophile turntable blending MoFi’s studio-grade engineering with Fender’s iconic Precision Bass aesthetics and musical heritage.
• Studio-Inspired Design – Built in collaboration with Fender, the plinth mirrors the classic Precision Bass finish, while the 10-inch Ultra tonearm and damped Delrin platter ensure precise tracking and low mechanical resonance.
• Precision Engineering – Featuring a hardened steel inverted bearing, isolated AC motor, and carefully tuned belt-drive system, this deck delivers excellent speed stability and low noise floor for revealing analogue playback.
• Specifications – Belt-drive system, 33⅓ and 45 RPM speeds, 10-inch gimbaled Ultra tonearm, Delrin platter, hardened steel inverted bearing, external AC motor, high-mass plinth for vibration control.
• Dimensions – Approximately 483 mm wide × 127 mm high × 356 mm deep, designed with substantial footprint for stability while remaining rack-friendly for most hi-fi installations.
• Weight – Weighs approximately 18 kg, reflecting its solid plinth construction, precision bearing assembly, and damped platter design for enhanced resonance control.
https://www.mofielectronics.com/products/mofi-electronics-fender-x-mofi-precisiondeck-limited-edition-turntable
$ 3,141.02 -
Jeff Rowland 112 Power Amplifier
• Overview – The Jeff Rowland 112 Power Amplifier, released in 2004, is a solid state Class AB stereo power amplifier delivering refined power, exceptional control, and the brand’s signature ultra-low noise performance.
• Balanced Circuit Design – Featuring fully balanced circuitry and precision-matched components, the Jeff Rowland 112 Power Amplifier delivers remarkable transparency, expansive soundstaging, and effortless dynamic scaling across demanding loudspeaker loads.
• Precision Power Delivery – With a high-current output stage and robust linear power supply, this amplifier produces authoritative bass control, smooth midrange texture, and refined high-frequency extension without harshness or strain.
• Specifications – Rated at 150 watts per channel into 8 ohms and 300 watts into 4 ohms, balanced XLR and RCA inputs, high-current output stage, frequency response 10Hz–40kHz, signal-to-noise ratio exceeding 90dB.
• Dimensions – Approximately 432 mm wide × 95 mm high × 356 mm deep, housed in a precision-machined aluminum chassis designed for thermal stability and mechanical resonance control.
• Weight – Weighs approximately 15 kg, reflecting its substantial power supply, heavy-duty transformer, and solid billet aluminum construction typical of Jeff Rowland designs.
$ 2,512.82Jeff Rowland 112 Power Amplifier
$ 2,512.82
All Products
-
Electrocompaniet S2 Streamer
• Overview – The Electrocompaniet S2 Streamer, released in 2020, is a high-performance network audio streamer featuring integrated DAC functionality, designed for high-resolution digital playback with seamless streaming platform compatibility.
• Streaming Architecture – Built on Electrocompaniet’s proprietary platform, the Electrocompaniet S2 Streamer supports TIDAL, Qobuz, Spotify Connect, AirPlay, and UPnP, delivering stable, high-quality music streaming across modern digital ecosystems.
• Sound Performance – The Electrocompaniet S2 Streamer delivers a smooth, analogue-like presentation with excellent detail retrieval, controlled dynamics, and refined tonal balance, making it suitable for high-end two-channel audio systems.
• Specifications – Integrated DAC with high-resolution support up to 24-bit/192kHz, Ethernet and Wi-Fi connectivity, USB input, coaxial and optical digital inputs/outputs, balanced XLR and RCA analogue outputs.
• Dimensions – Approximately 470 mm (W) × 80 mm (H) × 310 mm (D), featuring Electrocompaniet’s signature full-width chassis for easy rack integration and system matching.
• Weight – Approximately 8 kg, reflecting solid construction, internal shielding, and stable power supply design for consistent digital audio performance.
$ 942.31Electrocompaniet S2 Streamer
$ 942.31 -
Accuphase DS510 Power Conditioner
• Overview – The Accuphase DS510 Power Conditioner, released in 2012, is a solid-state AC power supply unit designed to deliver clean, stable electricity for audio systems using advanced waveform correction technology.
• Clean Power Architecture – Utilizing Accuphase’s waveform shaping and monitoring system, the Accuphase DS510 Power Conditioner converts incoming AC into a stable, low-distortion sine wave, significantly reducing noise and voltage fluctuations.
• System Performance Benefits – The Accuphase DS510 Power Conditioner enhances dynamic contrast, lowers background noise, and improves clarity by ensuring connected components receive consistent and interference-free power.
• Specifications – Rated output up to 510VA, output voltage 100V AC, total harmonic distortion under 0.3%, digital waveform display, multiple AC outlets, voltage and distortion monitoring functions.
• Dimensions – Approximately 465 mm (W) × 181 mm (H) × 386 mm (D), featuring a full-width chassis with front-panel display for real-time power condition monitoring.
• Weight – Approximately 23 kg, reflecting its heavy-duty transformer, internal filtering circuits, and robust construction for stable long-term operation.
$ 2,983.97Accuphase DS510 Power Conditioner
$ 2,983.97 -
Accuphase C3850 Pre Amp
• Overview – The Accuphase C3850 Pre Amp, released in 2015, is a solid-state reference preamplifier featuring fully balanced circuitry and Accuphase’s AAVA volume control for ultra-precise, low-noise signal handling.
• AAVA Volume Technology – Utilizing Accuphase’s proprietary Analog Vari-gain Amplifier system, the Accuphase C3850 Pre Amp achieves exceptional resolution and channel balance without conventional resistive attenuation, preserving signal purity at all volume levels.
• Reference-Level Performance – The Accuphase C3850 Pre Amp delivers ultra-low distortion, expansive soundstage, and precise imaging, offering a highly transparent and natural presentation ideal for top-tier source and amplification systems.
• Specifications – Fully balanced solid-state design, AAVA volume control, frequency response 3Hz–200kHz, total harmonic distortion below 0.005%, multiple balanced and unbalanced inputs/outputs, high signal-to-noise ratio exceeding 110dB.
• Dimensions – Approximately 477 mm (W) × 156 mm (H) × 412 mm (D), featuring Accuphase’s classic full-width chassis with premium finishing and robust internal layout.
• Weight – Approximately 24 kg, reflecting extensive internal shielding, high-quality power supply design, and precision-machined construction for stable, low-noise operation.
$ 14,762.81Accuphase C3850 Pre Amp
$ 14,762.81 -
Mark Levinson 331 Power Amp
• Overview – The Mark Levinson 331 Power Amp, released in 1995, is a solid-state Class AB stereo power amplifier delivering high-current performance with exceptional refinement, designed for demanding high-end loudspeaker systems.
• High-Current Design – Built with a massive linear power supply and robust output stage, the Mark Levinson 331 Power Amp delivers authoritative bass control, wide dynamic range, and effortless drive across low-impedance loads.
• Sonic Performance – The Mark Levinson 331 Power Amp is renowned for its smooth, transparent presentation, offering detailed midrange, extended highs, and excellent soundstage depth without harshness or listening fatigue.
• Specifications – 100W per channel into 8 ohms, 200W into 4 ohms, Class AB topology, fully discrete circuitry, frequency response 10Hz–20kHz, high damping factor, substantial current delivery for speaker control.
• Dimensions – Approximately 483 mm (W) × 140 mm (H) × 430 mm (D), featuring a full-width chassis designed for optimal heat dissipation and stable integration into hi-fi racks.
• Weight – Approximately 23–25 kg, reflecting its oversized transformer, heavy-duty chassis, and premium internal components designed for long-term reliability and performance.
$ 2,198.72Mark Levinson 331 Power Amp
$ 2,198.72 -
Dynaudio Stand 4
Former flagship Dynaudio Stand 4. Matt black in excellent condition. Solidly built. High-end stand. With atabites filled. (Already cost $100 plus). Come w original spikes. 2ft tall. Thanks
$ 274.84Dynaudio Stand 4
$ 274.84 -
Kimber Kable Sumit Series D60 Coaxial cable (1.5m)
• Overview – The Kimber Kable Sumit Series D60 Coaxial Cable (1.5m), released in the mid-2000s, is a high-performance 75-ohm digital interconnect engineered for precise signal transmission and reduced jitter in high-end audio systems.
• True 75-Ohm Performance – Designed with strict impedance control, the Kimber Kable Sumit Series D60 Coaxial Cable (1.5m) ensures accurate digital signal flow, minimizing reflections and preserving timing between transports, streamers, and DACs.
• Advanced Shielding Design – The Kimber Kable Sumit Series D60 Coaxial Cable (1.5m) incorporates high-purity copper conductors and braided shielding to effectively reject EMI and RF interference for cleaner digital playback.
• Specifications – 75-ohm coaxial digital cable, high-purity copper conductors, low-loss dielectric, braided shielding, RCA terminations, optimized for SPDIF digital transmission with low jitter and stable impedance characteristics.
• Dimensions – Cable length measures 1.5 meters, providing optimal spacing for digital component connections while maintaining signal integrity across typical hi-fi rack layouts.
• Weight – Approximately 0.4–0.6 kg depending on connector and shielding construction, offering a balance of durability, flexibility, and stable long-term digital performance.
$ 455.45 -
Chord Electronics Qutest DAC
• Overview – The Chord Electronics Qutest DAC, released in 2018, is a compact solid-state desktop DAC featuring FPGA-based digital conversion, delivering reference-level performance without integrated streaming, headphone amplification, or volume control.
• FPGA DAC Technology – Using Rob Watts’ proprietary FPGA architecture, the Chord Electronics Qutest DAC employs a custom WTA filter, achieving exceptional timing accuracy, ultra-low noise, and highly detailed digital-to-analogue conversion.
• Sound Performance – The Chord Electronics Qutest DAC is renowned for its transparency, fast transient response, and holographic imaging, delivering precise micro-detail and natural tonal balance across high-resolution digital sources.
• Specifications – FPGA-based DAC, supports PCM up to 768kHz and DSD512, dual BNC, optical, and USB inputs, fixed line-level output via RCA, selectable digital filters, ultra-low jitter clocking architecture.
• Dimensions – Measures approximately 160 mm (W) × 72 mm (H) × 41 mm (D), offering a compact footprint suitable for desktop or rack placement in high-end audio systems.
• Weight – Approximately 0.77 kg, featuring a solid aluminium chassis designed for vibration resistance, thermal stability, and long-term durability.
$ 1,083.65Chord Electronics Qutest DAC
$ 1,083.65 -
Kimber Select 3038 Speaker Cable (1.5m)
• Overview – The Kimber Select 3038 Speaker Cable, released in the mid-2000s, is a high-end speaker cable utilizing Kimber’s proprietary braided geometry and pure silver conductors for exceptional signal accuracy and transparency.
• Silver Conductor Technology – Featuring high-purity solid silver conductors, the Kimber Select 3038 Speaker Cable delivers fast transient response, improved detail retrieval, and enhanced high-frequency extension without harshness or glare.
• Braided Geometry Design – The Kimber Select 3038 Speaker Cable employs a complex multi-strand braided structure, reducing inductance and electromagnetic interaction, resulting in improved timing, coherence, and dynamic expression.
• Specifications – Pure silver conductors, multi-braid geometry, low inductance and capacitance design, high current handling capability, optimized impedance characteristics, compatible with spade or banana terminations.
• Dimensions – Typically supplied in custom lengths depending on system requirements, with standard configurations ranging from 2 to 3 meters per stereo pair for optimal speaker placement flexibility.
• Weight – Approximately 1.0–1.5 kg per stereo pair depending on length and termination, reflecting dense silver conductor content and robust construction for stable signal transfer.
$ 2,826.92Kimber Select 3038 Speaker Cable (1.5m)
$ 2,826.92 -
-
Accuphase AA70
• Overview – The Accuphase AA70, released in 1987, is a Class A solid-state stereo power amplifier delivering 60 watts per channel, designed with Accuphase’s signature precision circuitry and exceptional low-noise performance.
• Pure Class A Operation – Operating entirely in Class A, the Accuphase AA70 provides exceptionally smooth midrange, natural tonal warmth, and highly refined treble reproduction, characteristics prized by audiophiles and vintage Accuphase enthusiasts.
• Precision Japanese Engineering – The Accuphase AA70 incorporates high-quality discrete components, oversized power supply regulation, and robust build quality, ensuring stable current delivery and long-term reliability in demanding high-fidelity systems.
• Specifications – 60W per channel into 8 ohms in pure Class A operation, frequency response 20Hz–20kHz, low total harmonic distortion under 0.02%, high damping factor, heavy-duty power supply with large filter capacitors.
• Dimensions – Approximately 475 mm (W) × 170 mm (H) × 427 mm (D), reflecting Accuphase’s classic full-width chassis designed for optimal heat dissipation required for continuous Class A operation.
• Weight – Approximately 26 kg, demonstrating substantial internal transformer construction, heavy-duty heat sinks, and premium chassis engineering typical of vintage Accuphase Class A amplifiers.
$ 8,480.77Accuphase AA70
$ 8,480.77 -
Mcintosh MC462
• Overview – The McIntosh MC462, released in 2018, is a solid-state stereo power amplifier delivering 450 watts per channel, featuring McIntosh’s Autoformer technology for consistent power delivery across 2, 4, and 8 ohm speaker loads.
• Massive Power Delivery – Designed for effortless dynamic control, the McIntosh MC462 provides immense current reserves and headroom, allowing demanding loudspeakers to perform with authority, stability, and refined musical precision.
• Legendary McIntosh Engineering – The McIntosh MC462 incorporates Quad Balanced amplifier topology, oversized power supply architecture, and McIntosh’s iconic blue watt meters, ensuring extremely low distortion and long-term reliability.
• Specifications – 450W per channel into 2, 4, or 8 ohms via Autoformer, Quad Balanced solid-state topology, frequency response 10Hz–100kHz, total harmonic distortion 0.005%, dynamic headroom 1.8dB, balanced and unbalanced inputs.
• Dimensions – 445 mm (W) × 240 mm (H) × 533 mm (D), including front panel handles and rear connectors, reflecting the large chassis required for its high-current power supply and heat dissipation system.
• Weight – Approximately 52.3 kg (115 lbs), highlighting the amplifier’s massive transformer, Autoformer output stage, and heavy-duty construction typical of McIntosh reference-level power amplifiers.
$ 9,266.02Mcintosh MC462
$ 9,266.02 -
JBL 4635
• Overview – The JBL 4635 is a professional cinema subwoofer system engineered for high-output low-frequency reinforcement, utilizing dual 15-inch drivers in a large vented enclosure for powerful theatre-grade bass performance.
• Cinema Heritage – Designed for professional cinema installations, the JBL 4635 delivers deep, room-filling bass with exceptional dynamic capability, making it a legendary choice for large listening spaces and vintage high-efficiency systems.
• High-Output Performance – The JBL 4635 is capable of substantial acoustic output and extended low-frequency reproduction, providing impactful bass response that complements high-efficiency horn or large-format loudspeaker systems.
• Specifications – Dual 15-inch low-frequency drivers (typically JBL 2225H or 2226H depending on configuration), bass reflex enclosure, 4-ohm nominal impedance, frequency response approximately 30Hz–500Hz, high power handling exceeding 600W continuous.
• Dimensions – Approximately 1219 mm (H) × 762 mm (W) × 610 mm (D), reflecting its large cinema-grade enclosure designed for high acoustic efficiency and powerful low-frequency projection.
• Weight – Approximately 85–95 kg depending on driver configuration, constructed with heavy-duty cabinetry and professional drivers intended for demanding theatre and large venue applications.
$ 6,517.63JBL 4635
$ 6,517.63 -
Nordost Odin 2 RCA (1m)
• Overview – The Nordost Odin 2 RCA Interconnects, released in 2017, are reference-grade analogue interconnects utilizing Nordost’s Dual Mono-Filament technology and ultra-pure silver-plated conductors for extreme speed, transparency, and signal integrity.
• Dual Mono-Filament Design – By suspending conductors in a precision air dielectric matrix, the Nordost Odin 2 RCA Interconnects minimize dielectric interaction, dramatically reducing capacitance and preserving micro-detail, dynamic contrast, and spatial accuracy.
• Reference-Level Construction – Built using silver-plated solid-core OFC conductors and proprietary HOLO:PLUG® RCA connectors, the cable ensures precise impedance matching, exceptional conductivity, and extremely low signal loss across high-resolution audio systems.
• Specifications – Dual Mono-Filament air dielectric design, silver-plated solid-core OFC conductors, extremely low capacitance and inductance, HOLO:PLUG® precision RCA connectors, mechanically tuned length design for optimal signal transmission.
• Dimensions – Standard cable length typically supplied in matched stereo pairs; this configuration measures approximately 1–1.5 meters depending on system installation requirements and routing flexibility.
• Weight – Approximately 0.3–0.5 kg per stereo pair, reflecting lightweight dielectric structure, precision connectors, and advanced conductor geometry designed to reduce mechanical vibration and maintain signal purity.
$ 10,051.28Nordost Odin 2 RCA (1m)
$ 10,051.28 -
Mofi Electronics x Fender Precisiondeck Turntable
• Overview – The Mofi Electronics x Fender PrecisionDeck Turntable, released in 2022, is a belt-drive audiophile turntable blending MoFi’s studio-grade engineering with Fender’s iconic Precision Bass aesthetics and musical heritage.
• Studio-Inspired Design – Built in collaboration with Fender, the plinth mirrors the classic Precision Bass finish, while the 10-inch Ultra tonearm and damped Delrin platter ensure precise tracking and low mechanical resonance.
• Precision Engineering – Featuring a hardened steel inverted bearing, isolated AC motor, and carefully tuned belt-drive system, this deck delivers excellent speed stability and low noise floor for revealing analogue playback.
• Specifications – Belt-drive system, 33⅓ and 45 RPM speeds, 10-inch gimbaled Ultra tonearm, Delrin platter, hardened steel inverted bearing, external AC motor, high-mass plinth for vibration control.
• Dimensions – Approximately 483 mm wide × 127 mm high × 356 mm deep, designed with substantial footprint for stability while remaining rack-friendly for most hi-fi installations.
• Weight – Weighs approximately 18 kg, reflecting its solid plinth construction, precision bearing assembly, and damped platter design for enhanced resonance control.
https://www.mofielectronics.com/products/mofi-electronics-fender-x-mofi-precisiondeck-limited-edition-turntable
$ 3,141.02 -
Jeff Rowland 112 Power Amplifier
• Overview – The Jeff Rowland 112 Power Amplifier, released in 2004, is a solid state Class AB stereo power amplifier delivering refined power, exceptional control, and the brand’s signature ultra-low noise performance.
• Balanced Circuit Design – Featuring fully balanced circuitry and precision-matched components, the Jeff Rowland 112 Power Amplifier delivers remarkable transparency, expansive soundstaging, and effortless dynamic scaling across demanding loudspeaker loads.
• Precision Power Delivery – With a high-current output stage and robust linear power supply, this amplifier produces authoritative bass control, smooth midrange texture, and refined high-frequency extension without harshness or strain.
• Specifications – Rated at 150 watts per channel into 8 ohms and 300 watts into 4 ohms, balanced XLR and RCA inputs, high-current output stage, frequency response 10Hz–40kHz, signal-to-noise ratio exceeding 90dB.
• Dimensions – Approximately 432 mm wide × 95 mm high × 356 mm deep, housed in a precision-machined aluminum chassis designed for thermal stability and mechanical resonance control.
• Weight – Weighs approximately 15 kg, reflecting its substantial power supply, heavy-duty transformer, and solid billet aluminum construction typical of Jeff Rowland designs.
$ 2,512.82Jeff Rowland 112 Power Amplifier
$ 2,512.82 -
DCS Puccini SACD and Clock
• Overview – The dCS Puccini SACD and Clock, released in 2008, is a high-end SACD/CD player paired with an external master clock, delivering reference-level digital playback using dCS Ring DAC technology.
• Ring DAC Architecture – Built around dCS’s proprietary Ring DAC topology, the system ensures ultra-low jitter, exceptional linearity, and remarkable transparency across both Red Book CD and high-resolution SACD playback.
• Master Clock Integration – The dedicated Puccini U-Clock enhances timing precision by providing a stable word clock reference, reducing phase noise and improving spatial accuracy, micro-detail retrieval, and overall dynamic coherence.
• Specifications – Supports CD and SACD playback, Ring DAC conversion, upsampling capability, AES/EBU and SPDIF digital inputs, Word Clock I/O, extremely low jitter architecture, and balanced XLR analogue outputs.
• Dimensions – Each chassis measures approximately 461 mm wide × 92 mm high × 406 mm deep, maintaining a full-width premium enclosure designed for vibration resistance and rack integration.
• Weight – The player weighs approximately 18 kg, while the master clock adds around 10 kg, reflecting heavy shielding, precision clock modules, and robust internal power supplies.
$ 6,910.25DCS Puccini SACD and Clock
$ 6,910.25 -
Soulnote M3 Mono Amplifier
• Overview – The Soulnote M3 Mono Amplifier, released in 2019, is a solid state pure Class A monoblock design engineered with zero global feedback topology to deliver ultra-fast transient response and uncompromised musical transparency.
• Circuit Architecture – Built around Soulnote’s non-parallel push-pull output stage and discrete driver design, the amplifier emphasizes instantaneous current delivery, wide bandwidth, and exceptionally low phase distortion.
• Sonic Character – The Soulnote M3 Mono Amplifier is celebrated for explosive dynamics, deep tonal saturation, and expansive soundstage layering, making it ideal for high-resolution loudspeakers requiring precision and authority.
• Specifications – Pure Class A solid state topology, approximately 200W into 8Ω and 400W into 4Ω, wide frequency response beyond 20Hz–100kHz, extremely low distortion, and high current capability for difficult loads.
• Dimensions – Each chassis measures approximately 454 mm wide × 189 mm high × 430 mm deep, requiring generous ventilation to support continuous Class A thermal operation.
• Weight – Each monoblock weighs roughly 32 kg, reflecting oversized transformers, heavy aluminum construction, and substantial heat sinking for stable, long-term performance.
$ 22,615.37Soulnote M3 Mono Amplifier
$ 22,615.37 -
BAT REX 500 Power Amplifier
• Overview – BAT REX 500 Power Amplifier, released in 2023, is a flagship Class AB solid-state amplifier using N-channel MOSFET output stages and a dual-mono architecture for reference-level dynamics and authority.
• Power Architecture – Designed with Balanced Audio Technology’s SuperPak+ power supply and zero global feedback, the REX 500 delivers effortless control, fast transients, and unwavering stability into demanding loudspeaker loads.
• Sonic Performance – With spectral balance, expansive soundstaging, and deep transient grip, this amp scales orchestral crescendos and subtle passages alike, preserving musical detail and impact even at high listening levels.
• Specifications – BAT REX 500 Power Amplifier offers 500 watts per channel into 8 ohms and 1000 watts into 4 ohms, fully balanced input-to-output topology, wide 3 Hz–250 kHz bandwidth, high slew rate, and fuseless protection for uninterrupted power delivery.
• Dimensions – Approx. 483 mm (W) × 254 mm (H) × 597 mm (D), with a substantial chassis and thermal design that supports extended high-power operation without sag or coloration.
• Weight – Approximately 63 kg, reflecting massive power supplies, dual-mono construction, and extensive heatsinking to ensure long-term reliability and minimal distortion under load.
• Product Review –
https://www.hifinews.com/content/bat-rex-500-power-amplifier
https://www.stereophile.com/content/balanced-audio-technology-rex-500-power-amplifier
$ 13,977.56BAT REX 500 Power Amplifier
$ 13,977.56 -
Isotek Sigma Power Conditioner
• Overview – The Isotek Sigma Power Conditioner, released in 2015, is a solid-state mains conditioning component engineered to dramatically reduce electrical noise while maintaining unrestricted current delivery for high-performance audio systems.
• Power Architecture – Built around IsoTek’s advanced delta-filtering topology, the Isotek Sigma Power Conditioner isolates connected components, eliminating differential and common-mode noise while preventing cross-contamination between digital sources and high-current amplifiers.
• Sonic Performance – By lowering the system noise floor, the Isotek Sigma Power Conditioner improves bass articulation, dynamic contrast, image stability, and low-level resolution, especially noticeable in revealing reference-grade analogue and digital systems.
• Specifications – Rated for high-current audio use, featuring multiple individually filtered outlets, star-earthed grounding, internal copper bus bars, RFI/EMI suppression, and surge protection without dynamic compression or current limiting.
• Dimensions – Measures approximately 445 mm (W) × 150 mm (H) × 350 mm (D), designed for standard hi-fi racks while allowing sufficient ventilation and cable clearance for complex multi-component installations.
• Weight – Weighs roughly 15 kg, reflecting substantial internal filtering networks, shielding, and mechanical damping that contribute to stable, resonance-free operation and long-term electrical reliability.
$ 1,005.13Isotek Sigma Power Conditioner
$ 1,005.13 -
Isotek Evo3 Power Conditioner
• Product Overview – The Isotek Evo3 Power Conditioner (2016) is a solid-state mains conditioning solution designed to reduce electrical noise, improve current delivery, and enhance overall system clarity in high-resolution hi-fi setups.
• Filtering Topology – Employing IsoTek’s multi-stage delta filter network, the Isotek Evo3 Power Conditioner effectively removes both common-mode and differential-mode noise while preventing cross-contamination between connected audio components.
• Sonic Improvements – Users typically experience lower noise floor, improved micro-detail, tighter bass control, and greater soundstage depth, especially when used with sensitive digital sources and analogue front-end components.
• Specifications – Features high-current audio outlets, internal copper bus bars, star-earthed grounding, RFI/EMI suppression, and surge protection, all engineered to avoid current compression and preserve amplifier dynamics.
• Dimensions – Measures approximately 445 mm wide × 90 mm high × 305 mm deep, sized to integrate easily into standard hi-fi racks or equipment shelves without compromising ventilation or cable management.
• Weight – Weighs roughly 8 kg, reflecting robust internal filtering components, shielding, and mechanical construction designed to ensure stability, durability, and long-term performance consistency.
$ 942.31Isotek Evo3 Power Conditioner
$ 942.31
