-
Aavik Acoustics I-880 Integrated Amplifier
• Overview – The Aavik Acoustics I-880 Integrated Amplifier, released in 2021, is a flagship solid-state Class A integrated amplifier featuring an integrated DAC and network streaming platform, delivering uncompromising reference-level performance from a single chassis.
• Ultimate All-in-One Performance – The Aavik Acoustics I-880 Integrated Amplifier combines high-resolution streaming, premium digital conversion, and fully balanced analogue circuitry, producing expansive imaging, outstanding transparency, and exceptional musical realism.
Aavik 200W pure class A amplifier
Aavik have designed a circuitry that constantly keeps the bias spread 0,63 V above the required current, no matter where it is in the cycle. So, no matter how much current the power amp requires to perform, it always stays in Class A up to an impressive 2×200 W into 8 ohms, while at the same time not consuming unnecessary power.
This significant reduction in the power requirements of the amplifier allowed Aavik to design the capacitors as smaller units and place them locally, so that essentially each of the eight pairs of output transistors has its own capacitor bank right next to it. This means that the current does not have to flow through long wire harnesses and long circuit boards. The current is always directly at the output transistor, which means a shorter signal path and therefore less noise. In addition, this innovative Aavik design also means that the 880 amplifiers do not get as hot as conventional Class A amplifiers, resulting in higher efficiency.
Resonant mode power supply
This Aavik series is designed to ensure massive power resources with ultra-low noise. Unlike the square waves used by conventional switch mode power supplies, this Aavik series boast a resonant mode design which is principally driven by sine waves.
When more power is needed, the operating frequency increases, which, in turn, has the advantage that the power density also increases, thus allowing higher peak power when required by the music.
The 880 cabinet design
A study of materials and shapes. The exterior design of the Aavik 880 amplifier is the result of Flemming Erik Rasmussen’s artistic and aesthetic work. However, his design philosophy is and always has been that design must serve purpose. The cabinet of the Aavik 880 amplifier was designed primarily with the goal of maintaining the best audio characteristics of the electrical design, i.e. the lowest inductance, reducing hysteresis to an absolute minimum, and ensuring excellent resonance control. In addition, since this was a Class A amplifier that was to be developed, there were some predefined premises for the design. With these goals in mind, the design process became a study of shapes and materials that opened up a unique and constructive synergy between Flemming Erik Rasmussen and Michael Børresen.
For Prices LoginAavik Acoustics I-880 Integrated Amplifier
For Prices Login -
Aavik I-880 Integrated Amplifier
• Overview – Aavik I-880 Integrated Amplifier, released in 2021, is a high-power solid-state Class D integrated amplifier featuring advanced DAC and phono capabilities, engineered for extreme resolution and low-noise performance.
• Sound Performance – Designed for absolute transparency, the amplifier delivers explosive dynamics, ultra-low noise floor, and exceptional control, presenting music with speed, scale, and natural tonal balance across complex passages.
• Design Philosophy – Built using Aavik’s resonance-control technologies and minimalist signal paths, the Aavik I-880 Integrated Amplifier emphasizes mechanical grounding and vibration reduction to preserve microdetail and spatial accuracy.
• Specifications – Rated at approximately 300 watts per channel into 8 ohms and 600 watts into 4 ohms, offering extremely high damping factor, wide bandwidth, and stable operation with demanding loudspeaker loads.
• Dimensions – Chassis measures approximately 442 mm (W) × 147 mm (H) × 460 mm (D), providing a substantial yet refined footprint suitable for high-end audio racks.
• Weight – The amplifier weighs approximately 42 kg, reflecting its massive power supply, resonance-controlled enclosure, and premium internal construction for thermal stability and sonic consistency.
For Prices LoginAavik I-880 Integrated Amplifier
For Prices Login -
SOULNOTE A-3 Reference Integrated Amplifier
• Overview – SOULNOTE A-3 Reference Integrated Amplifier, released in 2021, is a solid-state Class AB integrated design without DAC or phono, engineered for ultimate signal purity and unrestricted current delivery.
• Circuit Philosophy – Built around SoulNote’s zero-feedback, non-parallel architecture, the amplifier prioritises instantaneous current response, wide bandwidth, and natural harmonic flow, appealing strongly to purist audiophiles.
• Sonic Character – SOULNOTE A-3 Reference Integrated Amplifier delivers exceptional dynamic contrast, dense tonal colour, and expansive soundstage depth, excelling with difficult loudspeaker loads and revealing high-resolution source components.
• Specifications – Rated at approximately 120 W per channel into 8 ohms and 240 W into 4 ohms, with ultra-high current capability, wide frequency response, and discrete output devices optimised for low impedance control.
For Prices LoginSOULNOTE A-3 Reference Integrated Amplifier
For Prices Login -
Aavik Acoustics I-188 Integrated Amplifier
• Overview – The Aavik Acoustics I-188 Integrated Amplifier, released in 2019, is a solid-state Class D integrated amplifier featuring an integrated DAC and network streaming platform, delivering exceptional efficiency, transparency, and musical precision.
• UFPD Amplification Technology – Utilizing advanced Class D amplification with an ultra-low-noise power supply, the Aavik Acoustics I-188 Integrated Amplifier delivers exceptional speed, effortless dynamics, and outstanding loudspeaker control across diverse listening environments.
• Complete High-End Solution – The Aavik Acoustics I-188 Integrated Amplifier combines high-resolution streaming, premium digital conversion, and balanced analogue circuitry, creating a versatile all-in-one component for modern audiophile systems.
Advanced Technology for Superior Musical Control
Aavik I-x88 amplifiers are based on the latest version of Pascal class D amplifier technology, which features even faster UMAC switching modulation and generates lesser noise. This circuit now requires lesser filtering and has lower output impedance, which ensures greater control over connected speakers, and consistent performance across the entire musical spectrum.
Resonant Mode Power Supply
Aavik x88 amplifiers feature a fast, low-noise switching power supply, optimized for class D amplification. Operating in power-factor-corrected resonant mode, it delivers smooth, clean sine wave power. When extra power is needed, the supply adjusts its frequency to increase power density, ensuring high peak currents without distortion. The result is a very low noise floor, low output impedance, and superior control over connected speakers.
For Prices LoginAavik Acoustics I-188 Integrated Amplifier
For Prices Login -
Grandinote Supremo Integrated Amplifier
• Overview – The Grandinote Supremo Integrated Amplifier (2018) is a high-end pure Class A solid-state integrated amplifier using full dual-mono, no-feedback topology with MagnetoSolid-VHP output transformers for exceptional musical depth and control.
• Architecture & Sound – With no capacitors in the signal path and full balanced XLR inputs only, the Supremo delivers ultra-wide bandwidth, superior channel separation, rich timbral accuracy, and a natural, uncompressed musical presentation.
• Performance Character – Sonically energetic and transparent, the Supremo balances precision and musicality, producing articulate bass, detailed midrange, and refined highs with remarkable dynamics and coherence.
• Specifications – Class A output 37 W per channel into 8 Ω, damping factor >230, flat response 1.5 Hz–350 kHz, four fully balanced XLR inputs, direct-coupled stages, and 270 W absorbed power.
• Dimensions – Chassis measures approximately 318 mm (W) × 196 mm (H) × 473 mm (D), crafted for mechanical rigidity and resonance suppression in premium audio systems.
• Weight – Weighs about 40 kg, reflecting substantial internal components, heavy shielding, and a robust, precision-machined Italian build for stability and long-term reliability.
For Prices LoginGrandinote Supremo Integrated Amplifier
For Prices Login -
Accuphase E-800 Integrated Amplifier
• Overview – The Accuphase E-800 Integrated Amplifier, released in 2020, is a pure Class A solid-state integrated amplifier featuring optional DAC and phono modules, delivering flagship-level refinement, power, and musicality in a single chassis.
• Pure Class A Performance – Operating entirely in Class A, the Accuphase E-800 Integrated Amplifier delivers exceptional tonal richness, effortless microdynamics, and a remarkably natural presentation with ultra-low distortion and noise.
• Reference Engineering – The Accuphase E-800 Integrated Amplifier incorporates Balanced AAVA volume control, fully balanced signal paths, and a massive power supply, ensuring precise control, transparency, and outstanding loudspeaker compatibility.
• Specifications – Pure Class A topology, 50W per channel into 8 ohms, 100W into 4 ohms, 200W into 2 ohms, damping factor 1000, frequency response 20Hz–20kHz (+0, -0.2dB), optional DAC and phono modules available.
• Dimensions – Measures 465 mm (W) × 211 mm (H) × 502 mm (D), featuring Accuphase’s premium full-width chassis with substantial heat sinks and meticulous internal component layout.
• Weight – Weighs approximately 36.8 kg, reflecting oversized power transformers, extensive Class A heat dissipation, and the uncompromising construction expected of a flagship Accuphase amplifier.
For Prices LoginAccuphase E-800 Integrated Amplifier
For Prices Login -
Jadis I-50 Tube Integrated Amplifier
• Product Overview – Jadis I-50 Tube Integrated Amplifier released in 2018, is a pure Class A, vacuum-tube integrated amplifier featuring line-level and optional phono capability, delivering classic French tube musicality with modern reliability.
• Circuit & Build Quality – Handcrafted in France, the amplifier employs point-to-point wiring, oversized transformers, and premium passive components, ensuring low noise, long-term stability, and the unmistakable Jadis tonal richness.
• Sound Performance –Jadis I-50 Tube Integrated Amplifier is known for its lush midrange, fluid dynamics, and expansive soundstage, the Jadis I-50 Tube Integrated Amplifier excels with vocals and acoustic music while maintaining control and drive with efficient loudspeakers.
• Specifications – Delivers approximately 50 W per channel in pure Class A using KT150 output tubes, with 4 and 8 ohm taps, wide bandwidth response, and robust power supply for consistent tube operation.
• Dimensions – Approximate chassis dimensions are 485 mm (W) × 245 mm (H) × 380 mm (D), housed in a polished stainless-steel frame that combines mechanical rigidity with distinctive visual presence.
• Weight – Weighs approximately 35 kg, reflecting massive transformers, heavy-gauge chassis construction, and substantial tube complement essential for Class A thermal and electrical stability.
For Prices LoginJadis I-50 Tube Integrated Amplifier
For Prices Login -
MBL N51 Integrated Amplifier
Specifications: MBL N51 Integrated Amplifier
• Type: Integrated amplifier
• Output Power: 380 W per channel (4 Ω), 200 W per channel (8 Ω)
• Class of Operation: Class A / AB hybrid
• Inputs: 3 × RCA (unbalanced), 2 × XLR (balanced)
• Outputs: 1 × RCA pre-out, 1 × XLR pre-out
• Frequency Response: 0.3 Hz – 330 kHz (-3 dB)
• THD: < 0.01% • Damping Factor: 200
• Input Impedance: 47 kΩ
• Dimensions (W × H × D): 45 × 17 × 40 cm
• Weight: 35 kg
• Made in Germany
For Prices LoginMBL N51 Integrated Amplifier
For Prices Login -
Silbatone Acoustics JI-107 Hybrid Integrated Amplifier
• Hybrid Integrated Amplifier Overview – The Silbatone Acoustics JI-107 Hybrid Integrated Amplifier is a Class A/B tube-solid-state design delivering 130W per channel into 8Ω and 200W into 4Ω, offering high power with tube character for demanding systems.
• NeoHyb Circuit Architecture – Using WE310 tubes for voltage gain and MOSFETs for current delivery, the JI-107 Hybrid Integrated Amplifier combines organic tube warmth with solid-state control, and one mention of the full product name ensures clarity.
• Direct-Coupled Signal Path – Eliminating coupling capacitors through servo-based level shifting, the Silbatone Acoustics JI-107 Hybrid Integrated Amplifier maintains ultra-low distortion, fast transient response and rich harmonic texture.
• High-Resolution Performance – With a frequency response of 10 Hz to 50 kHz (±1 dB) and high current drive, the Silbatone Acoustics JI-107 Hybrid Integrated Amplifier provides deep bass, refined midrange and expansive soundstage detail.
• Product Dimensions – Measures approximately 440 mm (W) × 420 mm (D) × 120 mm (H), designed for multiple configurations and to support the robust internal transformer and chassis structure.
• Product Weight – Weighing about 23 kg, the Silbatone Acoustics JI-107 Hybrid Integrated Amplifier uses a heavy-duty chassis and power supply coupling for mechanical stability and improved sonic performance.
For Prices Login -
SoulNote A-2 Ver. 2 Integrated Amplifier
Soulnote A-2 v2
Soulnote A-2 v2 is a fully balanced, non NFB integrated amplifier designed to preserve timing, texture, and dynamic swing while offering flexible operating modes for real systems.
Design and engineering
The A-2 v2 carries Soulnote’s discrete, wide bandwidth gain architecture with a short signal path and mechanical tuning derived from the Series 3 program. Revisions to device selection, biasing, and grounding reduce stored energy and lower audible residue, yielding cleaner transients and a more stable image.
What changed from A-2 (previous version)
The v2 platform strengthens current delivery and simplifies the voltage gain loop for higher purity. The driver stage also uses the same TO3P transistor as the output stage. By passing a large current through the driver, it instantly compensates for HFE fluctuations caused by current changes in the output stage. This is the biggest difference and breakthrough from the prior version. The power amp mode now hard bypasses selector and volume control for those who prefer a separate preamp. Chassis and top cover treatment improve resonance control compared to the earlier A-2.
Connectivity and control
Balanced and single ended inputs are relay switched, with a balanced attenuator for consistent channel tracking. Four modes cover integrated stereo, bi amp mono, power amp stereo, and power amp bi amp. Control logic is isolated so audio circuits remain quiet during operation.
What distinguishes it
Fast, high current drive with a lively, uncompressed presentation and the flexibility to act as a true power amp when required.
Who it is for
Listeners who value natural timing, wide bandwidth clarity, and the option to reconfigure the amplifier as their system evolves.
In the box
Main unit, metal remote control, AC power cable, spike feet, documentation.
For Prices LoginSoulNote A-2 Ver. 2 Integrated Amplifier
For Prices Login -
Luxman L-509X
• Flagship Integrated Design – The Luxman L-509X is a Class AB solid-state integrated amplifier with premium preamp, DAC-ready connectivity options, and precision volume control, delivering exceptional transparency and musical refinement.
• Advanced Circuit Topology – Featuring Luxman’s ODNF 4.0 technology and robust current delivery, the Luxman L-509X ensures low distortion, improved microdynamics, and authoritative grip over demanding loudspeakers.
• Premium Build Quality – Luxman L-509X showcases meticulous Japanese craftsmanship, including a reinforced chassis, precision meters, and optimized internal layout for noise reduction and long-term performance stability.
• Versatile System Integration – With high-grade line inputs, phono stage, and flexible system configuration, the amplifier accommodates both analog sources and modern setups while maintaining the signature Luxman sonic warmth.
• Dimensions – Luxman L-509X Measures approximately 440 mm (W) × 193 mm (H) × 463 mm (D), fitting comfortably into high-end audio racks while allowing proper ventilation.
• Weight – Weighs about 29.3 kg, reflecting its substantial power supply, robust transformers, and vibration-controlled chassis structure designed for maximum sonic purity.
For Prices LoginLuxman L-509X
For Prices Login -
Gryphon Diablo 120 Integrated Amplifier
• Overview – The Gryphon Diablo 120 Integrated Amplifier, released in 2015, is a solid-state Class AB integrated amplifier featuring optional DAC and phono modules, delivering high-current performance and true dual-mono architecture.
• High-Current Amplification – Built around a substantial power supply and fully balanced signal path, the Gryphon Diablo 120 Integrated Amplifier provides exceptional loudspeaker control, explosive dynamics, and effortless musical authority.
• Reference-Grade Engineering – The Gryphon Diablo 120 Integrated Amplifier incorporates dual-mono construction, ultra-short signal paths, and premium component selection, resulting in remarkable transparency, low noise, and holographic soundstage reproduction.
• Specifications – 120W per channel into 8 ohms, 240W into 4 ohms, Class AB topology, fully balanced architecture, frequency response 0.1Hz–350kHz, optional DAC and MM/MC phono modules, high-current output stage.
• Dimensions – Approximately 480 mm (W) × 170 mm (H) × 430 mm (D), featuring a substantial chassis engineered for vibration control, thermal stability, and optimal internal component layout.
• Weight – Approximately 25 kg, reflecting its oversized toroidal transformer, extensive heat sinking, and premium construction designed for long-term high-performance operation.
For Prices LoginGryphon Diablo 120 Integrated Amplifier
For Prices Login -
MBL C51 Integrated Amplifier
• MBL C51 Integrated Amplifier – This premium Class AB integrated amplifier combines high-current power delivery with MBL’s signature refinement, offering holographic imaging, smooth dynamics, and authoritative control suitable for demanding loudspeaker systems.
• Advanced Pre/Power Architecture – The C51 uses discrete circuitry, ultra-low-noise voltage regulation, and precision volume control to ensure exceptional signal purity, delivering lifelike tonal accuracy and outstanding microdynamic resolution.
• High-Current Output Performance – MBL C51 Integrated Amplifier is rated at 180W into 8Ω and 300W into 4Ω, the C51 provides excellent stability, grip, and transient impact, enabling it to drive complex speaker loads effortlessly and musically.
• Premium Noble Line Engineering – Borrowing from MBL’s flagship designs, the C51 features robust internal layout, resonance-optimized chassis construction, and meticulous parts selection to ensure consistent high-end performance.
• Dimensions – Approx. 440 mm (W) × 183 mm (H) × 390 mm (D). The sculpted Noble Line chassis provides superior mechanical stability and ventilation for reliable long-term operation.
• Weight – Approximately 28 kg, offering excellent mass damping and structural rigidity that enhances noise reduction and overall sonic refinement.
For Prices LoginMBL C51 Integrated Amplifier
For Prices Login -
McIntosh MA6700 Integrated Amplifier
• Overview – The McIntosh MA6700 Integrated Amplifier, released in 2013, is a solid-state Class AB integrated amplifier featuring a built-in DAC, delivering 200 watts per channel with McIntosh’s renowned Autoformer technology.
• Autoformer Power Delivery – Utilizing McIntosh Autoformers, the McIntosh MA6700 Integrated Amplifier delivers its full rated power into 2, 4, or 8-ohm speakers, ensuring consistent performance and effortless loudspeaker control.
• Digital & Analogue Flexibility – The McIntosh MA6700 Integrated Amplifier combines extensive analogue connectivity with an integrated DAC module, allowing seamless integration of modern digital sources and traditional hi-fi components.
• Specifications – 200W per channel into 2, 4, or 8 ohms, Class AB solid-state topology, Autoformer output stage, built-in DAC with USB, coaxial and optical inputs, MM phono stage, frequency response 20Hz–20kHz (+0, -0.5dB).
• Dimensions – Measures approximately 445 mm (W) × 194 mm (H) × 559 mm (D), featuring McIntosh’s iconic glass front panel, illuminated meters, and substantial chassis construction.
• Weight – Weighs approximately 34.1 kg, reflecting the massive power transformer, Autoformer technology, extensive heat sinking, and premium build quality expected from McIntosh.
For Prices LoginMcIntosh MA6700 Integrated Amplifier
For Prices Login -
LFD NCSE Mk. III Integrated Amplifier
• Overview – The LFD NCSE Mk. III Integrated Amplifier, released in 2015, is a solid-state integrated amplifier featuring pure analogue preamplification and minimalist circuit design, delivering highly musical performance without DAC or digital circuitry.
• Minimalist Circuit Philosophy – Designed by Dr. Richard Bews, the amplifier eliminates unnecessary components and feedback paths, allowing the LFD NCSE Mk. III Integrated Amplifier to achieve exceptional transparency, natural timing, and remarkably low noise.
• Pure Analogue Signal Path – The LFD NCSE Mk. III Integrated Amplifier is known for its short signal path and hand-selected components, producing lifelike midrange texture, dynamic agility, and an organic presentation highly valued by audiophiles.
• Specifications – Solid-state integrated amplifier, approximately 70W per channel into 8 ohms, high-current output stage, wide bandwidth design, line-level inputs only, ultra-short signal path architecture for minimal signal degradation.
• Dimensions – Approximately 445 mm (W) × 115 mm (H) × 300 mm (D), housed in a minimalist aluminium chassis designed to reduce resonance and maintain stable thermal performance.
• Weight – Approximately 10–12 kg, reflecting its substantial internal transformer, carefully selected discrete components, and rigid enclosure construction.
For Prices LoginLFD NCSE Mk. III Integrated Amplifier
For Prices Login -
SoulNote A-1 Ver. 2 Integrated Amplifier
• Product Overview – SoulNote A-1 Ver. 2 Integrated Amplifier, released in 2022, is a solid-state Class AB integrated amplifier using Soulnote’s zero-feedback philosophy, delivering exceptional speed, transparency, and natural musical flow.
• Circuit Architecture – Designed with fully discrete, non-NFB circuitry and simplified signal paths, the amplifier prioritises phase accuracy, micro-dynamic resolution, and tonal purity, appealing to listeners seeking uncoloured, high-resolution playback.
• Sound Performance – The SoulNote A-1 Ver. 2 Integrated Amplifier offers agile bass control, vivid midrange articulation, and extended treble clarity, pairing effortlessly with revealing loudspeakers and high-quality digital or analog sources.
• Specifications – Output power is approximately 80 W per channel into 8 ohms and 160 W into 4 ohms, featuring wide bandwidth, high current delivery, and a robust linear power supply.
• Dimensions – Approximate chassis dimensions are 454 mm (W) × 179 mm (H) × 407 mm (D), housed in a resonance-controlled aluminium enclosure optimised for electrical stability and thermal management.
• Weight – The unit weighs approximately 24 kg, reflecting its substantial transformer, high-capacity power supply components, and rigid mechanical construction designed to minimise vibration and noise.
For Prices LoginSoulNote A-1 Ver. 2 Integrated Amplifier
For Prices Login -
Densen B-175
• Densen B-175 Overview – The Densen B-175, introduced in 2011, is a solid-state Class A/B integrated amplifier featuring a fully modular architecture with built-in preamplification, delivering exceptional speed, precision, and musical transparency.
• High-Current Dynamic Control – Engineered with an oversized power supply and dual-mono output stages, the Densen B-175 offers explosive dynamics, superb transient accuracy, and tight bass grip suitable for demanding loudspeakers.
• Modular Upgrade Path – Designed for long-term ownership, the Densen B-175 supports optional phono stages and digital modules, allowing users to expand functionality while maintaining the amplifier’s core sonic purity.
• Distinctive Nordic Voicing – Known for its lively, open, and highly detailed presentation, the Densen B-175 preserves timing integrity and musical flow, making it an ideal match for rhythm-focused and revealing speaker systems.
• Dimensions – Approx. 440 mm (W) × 64 mm (H) × 310 mm (D), offering a low-profile form factor compatible with modern hi-fi racks and minimalist setups.
• Weight – Roughly 12 kg, supported by a rigid aluminum chassis and substantial internal power components that enhance stability and reduce mechanical resonance.
For Prices LoginDensen B-175
For Prices Login -
T+A V10
• Product Overview – The T+A V10, released in 2001, is a premium tube integrated amplifier built around Class A/AB operation, offering exceptional musical refinement with high-purity valve circuitry and sophisticated power regulation.
• Tube Architecture – Featuring a carefully engineered output stage using matched EL509/519 tubes, the V10 delivers outstanding dynamic capability, extended frequency response, and a natural harmonic texture favored by discerning listeners.
• Refined Control & Features – The T+A V10 provides high-quality preamplification, precise volume control, and multiple line-level inputs, ensuring flexible system integration while maintaining pristine analog signal integrity.
• Engineering Excellence – With separate power supplies and extensive shielding, the V10 achieves remarkably low noise, excellent channel separation, and stable thermal performance, enhancing clarity and realism in complex musical passages.
• Dimensions – Approx. 440 mm (W) × 170 mm (H) × 430 mm (D), designed with T+A’s signature industrial styling and durable build quality.
• Weight – Around 28 kg, reflecting its substantial transformer array, heavy-duty chassis, and robust tube assembly for enhanced mechanical stability.
For Prices Login -
Emillé Labs KI-40L
• Emillé Labs KI-40L Overview – The Emillé Labs KI-40L, introduced in 2009, is a pure Class A tube integrated amplifier using 6L6 output tubes, delivering approximately 40W per channel with lush harmonic texture and exceptional musical refinement.
• All-Tube Class A Musicality – The KI-40L produces a rich, fluid midrange with superb tonal density, offering smooth treble extension and natural warmth that pairs beautifully with high-efficiency or well-matched loudspeakers.
• Premium Handcrafted Engineering – Built in South Korea with custom transformers, point-to-point wiring, and vibration-controlled chassis design, the Emillé Labs KI-40L ensures exceptionally low noise, stability, and long-term reliability.
• Elegant & Functional Design – With precision-machined controls, refined aesthetics, and carefully regulated internal circuitry, the KI-40L offers both visual sophistication and a focused, highly engaging sonic presentation.
• Dimensions – Approx. 420 mm (W) × 190 mm (H) × 380 mm (D), substantial enough to house large transformers while fitting standard audio racks with adequate ventilation.
• Weight – Roughly 28 kg, providing robust mechanical grounding that enhances tube performance, reduces resonance, and supports consistent operation of its Class A circuitry.
For Prices LoginEmillé Labs KI-40L
For Prices Login -
Ars-Sonum Filarmonia SE
• Ars-Sonum Filarmonia SE Overview – The Ars-Sonum Filarmonia SE, a hand-built Class AB push-pull tube integrated amplifier released in 2010, delivers 30W of refined EL34-based musicality with a built-in high-quality tube preamplifier stage.
• Artisan Tube Engineering – Crafted in Spain by engineer Ricardo Hernández, the Filarmonia SE uses premium parts and strict point-to-point wiring to produce holographic imaging, tonal purity, and exceptional long-term reliability.
• Synergy With High-Sensitivity Speakers – The Ars-Sonum Filarmonia SE excels with moderately efficient loudspeakers, offering superb control, rich midrange texture, and a naturally dynamic presentation ideal for acoustic, vocal, and chamber music.
• Stabilized Power & Refined Voicing – Features a carefully regulated power supply, optimized output transformers, and vibration-controlled chassis design to maintain low noise, stable tube operation, and consistently musical performance.
• Dimensions – Approx. 430 mm (W) × 160 mm (H) × 350 mm (D), designed for robust stability and ideal placement on reference-grade equipment racks.
• Weight – Roughly 20 kg, with substantial transformers and a rigid chassis that enhance resonance control and support the amplifier’s authoritative sound.
For Prices LoginArs-Sonum Filarmonia SE
For Prices Login -
Primare I25 integrated Amplifier
I25 – modular integrated amplifier
I25 is an award winning modular full size integrated amplifier featuring our UFDP 2 amplification technology delivering 100 watts of power per channel, with the option of adding digital to analog converter and Prisma network player modules at any time.
For Prices LoginPrimare I25 integrated Amplifier
For Prices Login -
Roksan Blak Integrated Amplifier
• Overview – The Roksan Blak Integrated Amplifier, released in 2016, is a powerful Class AB solid-state design featuring an onboard high-performance DAC, delivering dynamic, controlled, and musically engaging playback for modern high-resolution systems.
• High-Current Amplification – The Roksan Blak Integrated Amplifier offers wide bandwidth and strong current delivery, ensuring excellent grip, transient precision, and rhythmic drive with demanding loudspeakers while maintaining smooth tonal balance.
• Versatile Digital Capability – With USB-B, optical, and coaxial digital inputs, the Roksan Blak supports high-resolution PCM playback, enabling system simplification by serving as both amplifier and DAC in one refined chassis.
• Premium Analog Performance – A robust linear power supply, refined preamp stage, and short signal paths provide excellent low noise, transparency, and imaging, ensuring the Roksan Blak Integrated Amplifier performs consistently across varied musical genres.
• Dimensions – Approx. 432 mm (W) × 80 mm (H) × 330 mm (D), offering a substantial but manageable footprint suitable for standard hi-fi racks or shelves.
• Weight – Approx. 14 kg, providing solid mechanical stability that reduces resonance and supports the amplifier’s high-current power architecture.
For Prices LoginRoksan Blak Integrated Amplifier
For Prices Login -
Jeff Rowland Concentra Integrated Amplifier
-
Jeff Rowland Concentra Integrated Amplifier – A masterpiece of Class AB amplification, combining preamplifier finesse and power amplifier control in one chassis for pure, transparent, and emotionally engaging sound reproduction.
-
Refined Class AB Topology – Delivers 100W per channel into 8Ω (170W into 4Ω), offering effortless dynamics, exceptional headroom, and authoritative grip across complex musical passages.
-
Precision Analog Engineering – Features fully balanced circuitry, ultra-low-noise design, and gold-plated connectors, ensuring perfect signal integrity and channel separation for uncompromised performance.
-
Timeless Design and Build – Machined from solid aircraft-grade aluminum, the Jeff Rowland Concentra Integrated Amplifier combines elegance, reliability, and the hallmark sonic purity of Rowland engineering.
-
Product Dimensions – 430 mm (W) × 100 mm (H) × 400 mm (D); compact yet substantial for a high-current integrated amplifier.
-
Weight – Approximately 22 kg; heavy-duty chassis ensures exceptional stability, heat dissipation, and resonance control.
For Prices LoginJeff Rowland Concentra Integrated Amplifier
For Prices Login -
-
Edge G3 Integrated Amplifier
• Overview – The Edge G3 Integrated Amplifier, released in the early 2000s, is a solid state Class AB integrated amplifier featuring high-current output stages and refined preamplification for authoritative, full-range loudspeaker control.
• Power & Drive – Delivering substantial current capability, Edge G3 Integrated Amplifier provides confident bass authority and stable performance into demanding loads, maintaining composure and dynamic headroom during complex musical passages.
• Build & Circuitry – Built with robust chassis construction and dual-mono inspired layout, the design emphasizes short signal paths and substantial power supply reserves to preserve transparency and channel separation.
• Specifications – Solid state Class AB topology, approximately 100–150 watts per channel into 8 ohms, high-current output stage, multiple line-level inputs, frequency response extending beyond 20 Hz–20 kHz with low distortion.
• Dimensions – Approximate dimensions are 430 mm wide × 150 mm high × 400 mm deep, providing substantial internal transformer space while fitting standard hi-fi racks.
• Weight – Weighing approximately 18–22 kg, the amplifier’s mass reflects its large power transformer and heat-sinking required for sustained high-current operation.
For Prices LoginEdge G3 Integrated Amplifier
For Prices Login
Preamp integrated components combine preamplification with additional functions such as DACs or phono stages, acting as a central control unit for Hi-Fi systems. These designs focus on signal routing, volume control, and system flexibility rather than speaker power. Preamp integrated units are often paired with separate power amplifiers, making them suitable for modular and upgrade-focused systems. Many high-quality designs remain relevant for years, making the pre-owned market an effective way to access advanced system control at better value.
SoundTribeAsia is positioned as the go-to online marketplace for new and pre-owned preamp integrated components in Singapore and Malaysia. Buyers can compare features, connectivity, and conditions across trusted sellers. With transparent listings and verified sellers, SoundTribeAsia supports confident system planning and upgrades.