-
Aavik Acoustics I-880 Integrated Amplifier
• Overview – The Aavik Acoustics I-880 Integrated Amplifier, released in 2021, is a flagship solid-state Class A integrated amplifier featuring an integrated DAC and network streaming platform, delivering uncompromising reference-level performance from a single chassis.
• Ultimate All-in-One Performance – The Aavik Acoustics I-880 Integrated Amplifier combines high-resolution streaming, premium digital conversion, and fully balanced analogue circuitry, producing expansive imaging, outstanding transparency, and exceptional musical realism.
Aavik 200W pure class A amplifier
Aavik have designed a circuitry that constantly keeps the bias spread 0,63 V above the required current, no matter where it is in the cycle. So, no matter how much current the power amp requires to perform, it always stays in Class A up to an impressive 2×200 W into 8 ohms, while at the same time not consuming unnecessary power.
This significant reduction in the power requirements of the amplifier allowed Aavik to design the capacitors as smaller units and place them locally, so that essentially each of the eight pairs of output transistors has its own capacitor bank right next to it. This means that the current does not have to flow through long wire harnesses and long circuit boards. The current is always directly at the output transistor, which means a shorter signal path and therefore less noise. In addition, this innovative Aavik design also means that the 880 amplifiers do not get as hot as conventional Class A amplifiers, resulting in higher efficiency.
Resonant mode power supply
This Aavik series is designed to ensure massive power resources with ultra-low noise. Unlike the square waves used by conventional switch mode power supplies, this Aavik series boast a resonant mode design which is principally driven by sine waves.
When more power is needed, the operating frequency increases, which, in turn, has the advantage that the power density also increases, thus allowing higher peak power when required by the music.
The 880 cabinet design
A study of materials and shapes. The exterior design of the Aavik 880 amplifier is the result of Flemming Erik Rasmussen’s artistic and aesthetic work. However, his design philosophy is and always has been that design must serve purpose. The cabinet of the Aavik 880 amplifier was designed primarily with the goal of maintaining the best audio characteristics of the electrical design, i.e. the lowest inductance, reducing hysteresis to an absolute minimum, and ensuring excellent resonance control. In addition, since this was a Class A amplifier that was to be developed, there were some predefined premises for the design. With these goals in mind, the design process became a study of shapes and materials that opened up a unique and constructive synergy between Flemming Erik Rasmussen and Michael Børresen.
For Prices LoginAavik Acoustics I-880 Integrated Amplifier
For Prices Login -
Aavik Acoustics SD-880 Streamer DAC
• Overview – The Aavik Acoustics SD-880 Streamer DAC, released in 2021, is a flagship solid-state network streamer and digital-to-analogue converter featuring fully balanced circuitry, integrated streaming, and reference-grade digital processing for uncompromising audio performance.
• Flagship Digital Architecture – Utilizing Aavik’s ultra-low-noise digital platform with precision clocking and advanced power regulation, the Aavik Acoustics SD-880 Streamer DAC delivers exceptional timing accuracy, ultra-low jitter, and remarkable musical realism.
• Reference Streaming Performance – The Aavik Acoustics SD-880 Streamer DAC supports high-resolution network playback with outstanding transparency, expansive soundstage, and exceptional micro-detail, making it an ideal source for reference-level audio systems.
Quiet but extremely powerful.
This Aavik series is designed to ensure massive power resources with ultra-low noise. Unlike the square waves used by conventional switch mode power supplies, this Aavik series boast a resonant mode design which is principally driven by sine waves.
When more power is needed, the operating frequency increases, which, in turn, has the advantage that the power density also increases, thus allowing higher peak power when required by the music.
The noise floor in the raw power supply is extremely low but could be even further lowered by the ultra-low noise regulators supplying the different parts of the circuit. The noise of these regulators is measured in a few microvolts respectively nanovolts, which is significantly lower than the noise level of conventional regulators.
The 880 cabinet design
A study of materials and shapes. The exterior design of the Aavik 880 amplifier is the result of Flemming Erik Rasmussen’s artistic and aesthetic work. However, his design philosophy is and always has been that design must serve purpose. The cabinet of the Aavik 880 amplifier was designed primarily with the goal of maintaining the best audio characteristics of the electrical design, i.e. the lowest inductance, reducing hysteresis to an absolute minimum, and ensuring excellent resonance control. In addition, since this was a Class A amplifier that was to be developed, there were some predefined premises for the design. With these goals in mind, the design process became a study of shapes and materials that opened up a unique and constructive synergy between Flemming Erik Rasmussen and Michael Børresen.
For Prices LoginAavik Acoustics SD-880 Streamer DAC
For Prices Login -
Soulnote M-3X Monoblock
• Overview – The Soulnote M-3X Monoblock, released in 2022, is a solid-state Class AB monoblock power amplifier engineered with Soulnote’s zero-negative-feedback philosophy to deliver reference-level dynamics, transparency, and musical realism.
• Zero-Feedback Circuitry – Employing Soulnote’s proprietary non-negative feedback topology, the Soulnote M-3X Monoblock preserves transient speed, harmonic integrity, and dynamic expression while maintaining exceptional control over demanding loudspeaker loads.
• Reference Mono Architecture – The Soulnote M-3X Monoblock features true monaural construction, oversized linear power supplies, mechanically isolated circuitry, and premium discrete components for outstanding channel separation and effortless musical presentation.
An enhanced current version of the M-3
We have been able to double the current delivery capacity without compromising the spatial expression or penetrating power of the single push, achieving in that way both delicate expression and overwhelming power.
Newly developed transistor pairing method
We have developed a new precise pairing method to match the fluctuation rate of hfe (current amplification factor), which consistently changes on the time axis due to transistor current changes during music playback. This method involves inputting hfe measurement data for a large number of transistors at various current values, calculating the Euclidean distance for all combinations, and then selecting transistor pairs that are within the standard value (a level that can be called identical if measurement errors are taken into account). Doing so has enabled us to achieve a “blur-free parallel push-pull” comparable to a single push-pull. The output stage transistors are a pair of industrial TO3 (metal can), the same type used in the M-3. The driver stage also incorporates the TO3P transistors to easily drive these two TO3 transistors for a total of four Darlington construction stages.
For Prices LoginSoulnote M-3X Monoblock
For Prices Login -
Aavik U-588 Unity
• Aavik U-588 Unity Overview – The Aavik U-588 Unity, introduced in the late 2010s, is a flagship Class D solid-state integrated amplifier with premium DAC functionality, offering exceptional musical resolution, ultra-low noise, and stunning dynamic power.
• Advanced Noise-Reduction & Resonance Control – Built with Aavik’s Tesla coil noise-suppression system, dither circuitry, and resonance-optimized chassis design, the Aavik U-588 Unity delivers remarkable clarity, microdynamic precision, and tonal purity across all sources.
• High-Current Class D Authority – The Aavik U-588 Unity features massive current reserves, lightning-fast transient response, and exceptional speaker control, enabling effortless handling of complex music passages at realistic listening levels.
• Premium DAC and Connectivity – Integrated with Aavik’s high-end digital architecture, the U-588 provides ultra-clean digital conversion, low-jitter performance, and flexible input options ideal for modern streaming and high-resolution playback systems.
• Dimensions – Approx. 102 mm (H) × 384 mm (W) × 400 mm (D), with a low-profile yet substantial chassis designed to minimize vibration and enhance electrical stability.
• Weight – Around 12 kg, reflecting its heavy shielding, robust power supply, and resonance-controlled construction.
For Prices LoginAavik U-588 Unity
For Prices Login -
Borresen C2 Speaker
• Overview – The Borresen C2 Speaker, released in 2019, is a high-end floorstanding loudspeaker featuring proprietary ribbon tweeter and iron-free magnetic motor technology, engineered for exceptional speed, transparency, and musical realism.
• Advanced Driver Technology – Utilizing Borresen’s patented iron-free magnetic system and ultra-light ribbon tweeter, the Borresen C2 Speaker delivers remarkable transient response, ultra-low distortion, and highly accurate sound reproduction.
• Reference-Level Performance – The Børresen C2 Speaker is renowned for its holographic imaging, expansive soundstage, and effortless dynamics, presenting music with extraordinary detail, natural tonality, and lifelike realism across all genres.
Bass/midrange Drivers: Børresen DCC5 Neo
At the core of the C-Series performance is the Børresen 5-inch CC Neo bass/midrange driver, meticulously crafted to deliver superior clarity and dynamics.
The Membrane
The membrane consists of three layers, laminated into a single unit: an aramid honeycomb core between two carbon fiber skins. The combination of these materials result in a moving surface with exceptional properties. Carbon fiber layers provide optimum stiffness in many different directions. This unique characteristic reduces vibrations and resonances to incredibly low levels.The Magnetic Motor System
The C-Series features a sophisticated magnetic motor system with double copper caps on the pole rings. This design, adapted from higher-end Børresen drivers, minimizes electromagnetic resonance and lowers inductance, easing the load on the amplifier.The Børresen Ribbon Tweeter: Speed and Precision
The C-Series is equipped with Børresen’s renowned RP94 Ribbon Planar Tweeter, a signature feature of the Børresen brand. With a remarkable efficiency of 94 dB and an ultra-light moving mass of just 0.01 grams, this closed ribbon tweeter is capable of incredible speed and responsiveness. Operating from 2.5 kHz and above, it captures the finest sonic details with precision and is robust enough to handle high transient peaks without distortion. This level of detail and clarity allows listeners to experience music with a level of subtlety and refinement rarely achieved.
For Prices LoginBorresen C2 Speaker
For Prices Login -
Soulnote P-3 Preamplifier
• Overview – The Soulnote P-3 Preamplifier, released in 2022, is a reference solid-state preamplifier featuring a fully balanced, non-negative-feedback analogue design engineered to deliver exceptional transparency and musical realism.
• Zero-Feedback Architecture – Employing Soulnote’s proprietary non-negative-feedback circuit topology, the Soulnote P-3 Preamplifier preserves transient accuracy, harmonic integrity, and dynamic expression while maintaining an exceptionally low noise floor.
• Reference-Level Engineering – The Soulnote P-3 Preamplifier features dual-mono construction, discrete analogue circuitry, and mechanically isolated assemblies, delivering expansive soundstaging, precise imaging, and outstanding channel separation for flagship audio systems.
Type-R circuits are used inside the non-NFB balance amplifier
The output line amplifier uses Type-R discrete non-NFB balance circuits that have been finely tuned for preamplifier use. It also includes the newly-developed super high-quality naked foil resistors. With 1ohm emitter resistors and 3.9ohm output resistance, it delivers astonishing information detail and S/N presence for superior power preamplifier drive capabilities.
High-end resistance switching method audio volume control circuit
The best possible methods and the highest-quality parts create the best audio volume control. All the resistors in this unit are ultra high-quality, naked foil resistors. The switching relays also use the newly developed RSR-2-12D (Reference SOULNOTE Relay) ultralow loss custom relay. Volume control is configured with 144 steps in 0.5 dB intervals. Vibrancy and sound quality remain unaffected, even when lowering the volume.
RSR-2-12D (Reference SOULNOTE Relay)
An ultra-low loss glass tube sealed reed relay that performs similar to a mercury relay as a base has been further customized. This is an original custom relay created by SOULNOTE that can reach sound quality levels comparable to that of wire. Each P-3 contains 94 of these relays.
For Prices LoginSoulnote P-3 Preamplifier
For Prices Login -
SOULNOTE D-3 DAC
• Overview – SOULNOTE D-3 DAC, released in 2020, is a reference-class digital-to-analog converter designed with SoulNote’s zero-feedback architecture to deliver highly accurate, ultra-low distortion conversion and musical transparency.
• Digital Architecture – Utilising discrete analogue filter stages and precision clocking, the D-3 DAC preserves timing integrity and dynamic expression, providing outstanding resolution and spatial coherence from PCM and DSD sources.
• Sound Quality – The SOULNOTE D-3 DAC is prized for its natural midrange clarity, refined treble extension, and low noise floor, allowing connected preamplifiers and amplifiers to reveal deeper musical nuance across genres.
For Prices LoginSOULNOTE D-3 DAC
For Prices Login -
SOULNOTE A-3 Reference Integrated Amplifier
• Overview – SOULNOTE A-3 Reference Integrated Amplifier, released in 2021, is a solid-state Class AB integrated design without DAC or phono, engineered for ultimate signal purity and unrestricted current delivery.
• Circuit Philosophy – Built around SoulNote’s zero-feedback, non-parallel architecture, the amplifier prioritises instantaneous current response, wide bandwidth, and natural harmonic flow, appealing strongly to purist audiophiles.
• Sonic Character – SOULNOTE A-3 Reference Integrated Amplifier delivers exceptional dynamic contrast, dense tonal colour, and expansive soundstage depth, excelling with difficult loudspeaker loads and revealing high-resolution source components.
• Specifications – Rated at approximately 120 W per channel into 8 ohms and 240 W into 4 ohms, with ultra-high current capability, wide frequency response, and discrete output devices optimised for low impedance control.
For Prices LoginSOULNOTE A-3 Reference Integrated Amplifier
For Prices Login -
Borresen BM3 Bass
• Overview – The Borresen BM3 Bass, released in 2023, is a reference-grade active bass module engineered to extend low-frequency performance and seamlessly integrate with compatible Børresen loudspeaker systems for greater scale and authority.
• Advanced Bass Technology – Utilizing Borresen’s proprietary iron-free magnetic motor technology and long-throw bass drivers, the Børresen BM3 Bass delivers exceptionally fast, controlled, and distortion-free low-frequency reproduction.
• Seamless System Integration – The Børresen BM3 Bass is designed to complement compatible Børresen loudspeakers, enhancing bass extension, dynamic headroom, and overall soundstage without compromising speed, coherence, or tonal balance.
Unique Crossover Topology
The Børresen Bass Module features a fully analog low-pass crossover derived directly from advanced Aavik amplifier designs. Unlike conventional subwoofers that rely on DSP-based filtering, this analog topology avoids signal delay and preserves timing accuracy. The crossover allows precise selection of cut-off frequencies between 30–80 Hz with a fixed 24 dB/octave slope, ensuring a natural and seamless transition. Fine level adjustment in 0.25 dB steps enables exact bass integration, while the internal crossover can be bypassed when using compatible Aavik electronics.
Advanced Noise Rejection
Noise rejection is fundamental to the performance of the Børresen Bass Module. Acoustic, electrical, and airborne noise are addressed through a comprehensive system of technologies developed across Audio Group Denmark. Active Tesla coils and active square Tesla coils suppress voltage spikes through counter-phase cancellation, dramatically lowering the noise floor. Analog Dither Technology amplifies the music signal while reducing background noise within the crossover circuits. Anti-Aerial Resonance Coil technology prevents RF interference from entering the signal path by absorbing and eliminating airborne noise. Together, these technologies create a purer, quieter environment where musical detail, clarity, and spatial definition can fully emerge.
For Prices LoginBorresen BM3 Bass
For Prices Login -
Aavik Acoustics R-188 Phono Stage
• Overview – The Aavik Acoustics R-188 Phono Stage, released in 2019, is a solid-state MM/MC phono preamplifier featuring fully balanced circuitry and advanced resonance control for exceptionally transparent analogue playback.
• Advanced Analogue Design – Utilizing ultra-low-noise circuitry and precision component matching, the Aavik Acoustics R-188 Phono Stage preserves delicate cartridge signals, delivering outstanding dynamics, tonal purity, and exceptional vinyl realism.
• Flexible Cartridge Compatibility – The Aavik Acoustics R-188 Phono Stage supports both optical and moving coil cartridges, ensuring optimal performance across a wide range of premium turntables.
Analog dither technology 3rd generation
A 3rd generation of the Ansuz analog dither technology has been developed. Analog dither technology originated in radar, where it ensured a stronger signal and thus greater range. The active Tesla coils send pulsating signals at precisely defined frequencies. These signals are sent in anti-phase. This significantly amplifies the musical signal and eliminates the background noise floor.
MC Engine
Aavik’s MC engine is built for absolute silence and precision. Its fully balanced, floating input stage uses ultra-low-noise BISS transistors to extract the finest details from MC cartridges. A gentle 75μs filter reduces pops and crackle, while a hand-matched passive RIAA network ensures perfect channel accuracy. The result is a clean, natural, and highly dynamic analogue performance.
Analysis and studies have led to new options – and a lot of listening has resulted in this 3rd generation design which is a further optimization of the most effective frequencies which opens the soundscape even more and with the tiniest details when it comes to reproduction of the recordings.
For Prices LoginAavik Acoustics R-188 Phono Stage
For Prices Login -
Aavik Acoustics I-188 Integrated Amplifier
• Overview – The Aavik Acoustics I-188 Integrated Amplifier, released in 2019, is a solid-state Class D integrated amplifier featuring an integrated DAC and network streaming platform, delivering exceptional efficiency, transparency, and musical precision.
• UFPD Amplification Technology – Utilizing advanced Class D amplification with an ultra-low-noise power supply, the Aavik Acoustics I-188 Integrated Amplifier delivers exceptional speed, effortless dynamics, and outstanding loudspeaker control across diverse listening environments.
• Complete High-End Solution – The Aavik Acoustics I-188 Integrated Amplifier combines high-resolution streaming, premium digital conversion, and balanced analogue circuitry, creating a versatile all-in-one component for modern audiophile systems.
Advanced Technology for Superior Musical Control
Aavik I-x88 amplifiers are based on the latest version of Pascal class D amplifier technology, which features even faster UMAC switching modulation and generates lesser noise. This circuit now requires lesser filtering and has lower output impedance, which ensures greater control over connected speakers, and consistent performance across the entire musical spectrum.
Resonant Mode Power Supply
Aavik x88 amplifiers feature a fast, low-noise switching power supply, optimized for class D amplification. Operating in power-factor-corrected resonant mode, it delivers smooth, clean sine wave power. When extra power is needed, the supply adjusts its frequency to increase power density, ensuring high peak currents without distortion. The result is a very low noise floor, low output impedance, and superior control over connected speakers.
For Prices LoginAavik Acoustics I-188 Integrated Amplifier
For Prices Login -
Aavik Acoustics SD-188 Streamer DAC
• Overview – The Aavik Acoustics SD-188 Streamer DAC, released in 2019, is a solid-state network streamer and digital-to-analogue converter featuring integrated streaming, premium DAC architecture, and fully balanced analogue outputs for high-end audio systems.
• Advanced Digital Architecture – Utilizing a low-noise streaming platform, precision clocking, and balanced analogue output stage, the Aavik Acoustics SD-188 Streamer DAC delivers exceptional timing accuracy, low jitter, and remarkable musical transparency.
Continuum DAC
The Continuum DAC takes a unique approach to digital-to-analog conversion with a fully chipless design. A custom-programmed FPGA converts all digital audio into high-resolution DSD512, a format that closely mimics analog. A specialized digital filter then smooths the signal without any switching, preserving a natural, continuous sound. A simple analog filter completes the path, revealing music with clarity, warmth, and depth. This breakthrough design powers the Aavik SD-x88 series, delivering an exceptionally lifelike listening experience.
Resonant Mode Power Supply
Aavik x88 amplifiers feature a fast, low-noise switching power supply, optimized for class D amplification. Operating in power-factor-corrected resonant mode, it delivers smooth, clean sine wave power. When extra power is needed, the supply adjusts its frequency to increase power density, ensuring high peak currents without distortion. The result is a very low noise floor, low output impedance, and superior control over connected speakers.
Active Tesla coil
Effective noise killer.
The active Tesla coils are power supplied which secures a remarkable lower impedance and thus a better ability to eliminate noise. The active version is about three to four times more efficient than passive Tesla coils.• Reference Streaming Performance – The Aavik Acoustics SD-188 Streamer DAC supports high-resolution network playback while producing expansive soundstaging, outstanding detail retrieval, and natural tonal balance for discerning audiophiles.
For Prices LoginAavik Acoustics SD-188 Streamer DAC
For Prices Login -
SoulNote A-3 Core Amplifier
• Overview – The Soulnote A-3 Core Amplifier, released in 2022, is a solid-state Class AB integrated amplifier featuring a pure analogue signal path without built-in DAC or phono stage, engineered for uncompromising musical transparency.
• Non-NFB Circuit Design – Employing Soulnote’s proprietary non-negative feedback topology, the Soulnote A-3 Core Amplifier delivers exceptional transient response, natural harmonic reproduction, and outstanding microdynamic expression with remarkable sonic realism.
• Reference Japanese Engineering – The Soulnote A-3 Core Amplifier features a dual-mono architecture, oversized toroidal transformer, and mechanically floating construction to minimize vibration while maximizing clarity, soundstage precision, and musical engagement.
New Type-R circuit, fully balanced non-NFB
For voltage amplification, a newly developed high-gain-to-GND single-stage Type-R circuit is adopted. Naked foil resistors are used generously for all resistors involved in amplifier operation.
GND anchor
The GND of the left and right channel power supply units is grounded to the left and right-side metal insulated with ceramic washers, a special enclosure construction that acts as a GND anchor. A sense of openness and low-end grip is achieved at a high level.
Super-strong power transformer
2x 700VA unimpregnated toroidal power transformers are used for the power amplification, to the left and right. In addition, three power transformers, including the control system power transformer, are packed into one enclosure. They are all mounted vertically so that the magnetic field lines are parallel to the board.
High-speed non-NFB power supply
For the rectifying capacitor, a specially selected high withstand voltage small capacitance low magnification foil filter capacitor of only 470uF is used. To optimize the capacity, the number of units used was determined and the load on the power transformer was reduced. This further improved the real regulation of the ultra-powerful power transformer. For the rectifier diodes, SiC diodes of the latest specifications with enhanced allowable inrush current are used. This is the most powerful and high-speed power supply configuration ever considered. In addition, two large power relays with excellent sound quality are used independently and without fixing as power switches for the two main power transformer. Independent power switch for each power transformer, which is a high current contact point, is extremely crucial for sound quality.In addition, the power switch on the front panel is dedicated to the control system sub-transformer.
For Prices LoginSoulNote A-3 Core Amplifier
For Prices Login -
Soulnote Z-3 Network Transport
• Overview – The Soulnote Z-3 Network Transport, released in 2023, is a reference-grade network transport engineered to deliver ultra-low-noise digital streaming through a pure transport architecture without an internal DAC.
• Reference Streaming Architecture – Utilizing Soulnote’s proprietary non-negative-feedback design philosophy and low-noise clock architecture, the Soulnote Z-3 Network Transport preserves timing accuracy, lowers jitter, and maximizes digital signal integrity.
• Flagship Digital Performance – The Soulnote Z-3 Network Transport supports high-resolution network playback while providing exceptional transparency, expansive soundstage, and natural musical flow when paired with premium external DACs.
Ultra-powerful non-NFB discrete power supply
The Z-3 uses the same digital high-reguration transformer as D-3. An unprecedented 260 VA large-capacity transformer is used to create four non-NFB discrete power supply circuits separated from each circuit winding. It uses a total of 16 ultra high-speed SiC rectifier diodes and 70 low-magnification electrolytic condensers. This provides endless expressive power with overflowing clarity and directness.
ZERO LINK
ZERO LINK drastically reduces the work of the D/A converter and completely eliminates the use of asynchronous components in the D/A converter housing. In the Z-3, ZERO LINK replaces every asynchronous component to transmit only signals polished beautifully by the clock to the D/A converter. The resulting sound quality is an unprecedented leap forward in the sonic universe. This solution surpasses the highest levels of analog playback.
For Prices LoginSoulnote Z-3 Network Transport
For Prices Login -
BAT REX 500 Power Amplifier
• Overview – BAT REX 500 Power Amplifier, released in 2023, is a flagship Class AB solid-state amplifier using N-channel MOSFET output stages and a dual-mono architecture for reference-level dynamics and authority.
• Power Architecture – Designed with Balanced Audio Technology’s SuperPak+ power supply and zero global feedback, the REX 500 delivers effortless control, fast transients, and unwavering stability into demanding loudspeaker loads.
• Sonic Performance – With spectral balance, expansive soundstaging, and deep transient grip, this amp scales orchestral crescendos and subtle passages alike, preserving musical detail and impact even at high listening levels.
• Specifications – BAT REX 500 Power Amplifier offers 500 watts per channel into 8 ohms and 1000 watts into 4 ohms, fully balanced input-to-output topology, wide 3 Hz–250 kHz bandwidth, high slew rate, and fuseless protection for uninterrupted power delivery.
• Dimensions – Approx. 483 mm (W) × 254 mm (H) × 597 mm (D), with a substantial chassis and thermal design that supports extended high-power operation without sag or coloration.
• Weight – Approximately 63 kg, reflecting massive power supplies, dual-mono construction, and extensive heatsinking to ensure long-term reliability and minimal distortion under load.
• Product Review –
https://www.hifinews.com/content/bat-rex-500-power-amplifier
https://www.stereophile.com/content/balanced-audio-technology-rex-500-power-amplifier
For Prices LoginBAT REX 500 Power Amplifier
For Prices Login -
HANA Umami Black MC Cartridge
• Product Overview – HANA Umami Black MC Cartridge, released in 2020, is a flagship moving-coil design featuring an Alnico magnet system and ultra-rigid body construction for reference-level analog playback.
• Design Philosophy – Precision-machined duralumin body with ebony top plate provides exceptional resonance control, allowing the cartridge generator to operate with greater stability, lower noise floor, and enhanced musical focus.
• Sonic Performance – HANA Umami Black MC Cartridge delivers deep, articulate bass, lifelike midrange tonality, and finely resolved treble, excelling in soundstage depth, microdynamics, and natural harmonic texture.
• Specifications – Nude microline stylus on boron cantilever, output 0.4 mV, internal impedance 6 ohms, recommended load >80 ohms, optimized for high-end MC phono stages.
• Dimensions – Standard cartridge form factor, approximately 28 mm (L) × 16 mm (W) × 16 mm (H), compatible with most tonearms using standard half-inch mounting.
• Weight – Cartridge weight approximately 10.5 g, offering excellent mass compatibility with medium to high-mass tonearms for optimal tracking and mechanical stability.
For Prices LoginHANA Umami Black MC Cartridge
For Prices Login -
Soulnote D-2 v2 DAC
• Overview – The Soulnote D-2 v2 DAC, released in 2022, is a reference-grade solid-state digital-to-analogue converter featuring fully balanced discrete circuitry and a non-negative-feedback design for exceptional digital playback fidelity.
• Discrete DAC Architecture – Employing Soulnote’s proprietary discrete analogue output stage and non-negative-feedback topology, the Soulnote D-2 v2 DAC delivers outstanding transient accuracy, low noise, and remarkably natural musical presentation.
• Reference Digital Performance – The Soulnote D-2 v2 DAC supports high-resolution PCM and DSD playback, producing expansive soundstaging, exceptional micro-detail, and lifelike tonal balance when partnered with premium digital transports.
Twin mono construction with “New Type-R Circuit”
Featuring a massive, non-NFB discrete amplifier circuit comparable to a power amplifier, it incorporates the latest “New Type-R Circuit” — originally developed for SOULNOTE’s flagship phono equalizer E-3—refined specifically for the digital-to-analog-converter. This achieves a twin mono construction with power supplies and all components arranged separately for each channel.
LMX2594 from Texas instrument for DDS
Texas Instruments’ PLLatinum™ RF synthesizer LMX2594 is adopted for as an audio DDS. It boasts world-leading specifications: a performance index of -236dBc/Hz and jitter of 45fs (femtoseconds, where 1 femto equals 1/1000th of a pico). This ultra-low jitter DDS enables overwhelmingly clear and profound spatial imaging, not only when using a high-precision external clock but also when utilizing the built-in TCXO.
For Prices LoginSoulnote D-2 v2 DAC
For Prices Login -
SoulNote A-2 Ver. 2 Integrated Amplifier
Soulnote A-2 v2
Soulnote A-2 v2 is a fully balanced, non NFB integrated amplifier designed to preserve timing, texture, and dynamic swing while offering flexible operating modes for real systems.
Design and engineering
The A-2 v2 carries Soulnote’s discrete, wide bandwidth gain architecture with a short signal path and mechanical tuning derived from the Series 3 program. Revisions to device selection, biasing, and grounding reduce stored energy and lower audible residue, yielding cleaner transients and a more stable image.
What changed from A-2 (previous version)
The v2 platform strengthens current delivery and simplifies the voltage gain loop for higher purity. The driver stage also uses the same TO3P transistor as the output stage. By passing a large current through the driver, it instantly compensates for HFE fluctuations caused by current changes in the output stage. This is the biggest difference and breakthrough from the prior version. The power amp mode now hard bypasses selector and volume control for those who prefer a separate preamp. Chassis and top cover treatment improve resonance control compared to the earlier A-2.
Connectivity and control
Balanced and single ended inputs are relay switched, with a balanced attenuator for consistent channel tracking. Four modes cover integrated stereo, bi amp mono, power amp stereo, and power amp bi amp. Control logic is isolated so audio circuits remain quiet during operation.
What distinguishes it
Fast, high current drive with a lively, uncompressed presentation and the flexibility to act as a true power amp when required.
Who it is for
Listeners who value natural timing, wide bandwidth clarity, and the option to reconfigure the amplifier as their system evolves.
In the box
Main unit, metal remote control, AC power cable, spike feet, documentation.
For Prices LoginSoulNote A-2 Ver. 2 Integrated Amplifier
For Prices Login -
Audience frontRow Reserve Speaker Cables (2.5m)
• Reference-Level Design – The Audience FrontRow Reserve Speaker Cables (2.5m) feature advanced UHVP conductors and precision geometry engineered to deliver ultra-low distortion, exceptional transient accuracy, and lifelike musical coherence.
• Ultra-High Voltage Process – These cables undergo Audience’s UHVP conditioning technology, enhancing conductivity, microdynamic expression, and tonal purity while maintaining a natural and immersive presentation across demanding high-end systems.
• Premium Construction – Audience FrontRow Reserve Speaker Cables (2.5m) utilize cryogenically treated metallurgy, low-mass terminations, and dielectric optimization to reduce noise, improve timing accuracy, and maximize system transparency.
• System Synergy – Designed for top-tier amplifiers and speakers, the cable’s stable impedance and high bandwidth ensure seamless integration, improved rhythmic drive, and superior spatial imaging across complex recordings.
• Dimensions – Length: 2.5 meters. Flexible, low-mass construction designed for easy routing and compatibility with tight or complex rack layouts.
• Weight – Lightweight yet robust, engineered to minimize mechanical resonances while retaining durability and consistent long-term electrical performance.
For Prices Login -
SoulNote E-2 v2 Phono
• Overview – The SoulNote E-2 v2 Phono, released in 2022, is a solid-state MM/MC phono preamplifier featuring a fully balanced, non-negative-feedback analogue design for reference-quality vinyl playback and exceptional musical realism.
• Non-Negative-Feedback Design – Employing SoulNote’s proprietary non-negative-feedback circuit topology, the SoulNote E-2 v2 Phono preserves delicate analogue information, delivering outstanding transient response, ultra-low noise, and exceptional harmonic integrity.
• Reference Vinyl Performance – The SoulNote E-2 v2 Phono offers highly configurable cartridge loading and gain settings, producing expansive soundstaging, lifelike dynamics, and remarkable detail retrieval from both moving magnet and moving coil cartridges.
New Type-R circuit for optical cartridges
The analogue circuit for the optical cartridge incorporates the fully balanced, non-NFB “New Type-R Circuit.” This is also employed in SOULNOTE’s flagship phono equalizer E-3. The equalizer element is constructed using a differential emitter bypass circuit. This has succeeded in significantly reducing the circuit impedance. “New Type-R Circuit” is electrically stress-free, without requiring phase compensation or bandwidth limiting. This fully exploits the benefits of the optical cartridge, liberated from the constraints of coil weight, magnetic circuit mass, and inductive resistance. The combination of the photoelectric system’s excellent transient response and the non-NFB design creates an overwhelmingly vivid and intensely lifelike musical space.
XLR connector for the power-isolated cable
Compatible with the power-isolated cable adopted in SOULNOTE’s flagship phono equalizer E-3. By separating the signal and LED power supply, it maximizes the benefits of the optical cartridge.
For Prices LoginSoulNote E-2 v2 Phono
For Prices Login -
Mark Levinson No. 5101
• Premium Digital Hub – The Mark Levinson No. 5101 combines a high-end CD player, network streamer, and DAC in one chassis, offering reference-grade digital playback with precision engineering and ultra-low-noise architecture.
• Advanced DAC Architecture – The unit employs a premium ESS Sabre DAC with fully balanced analog stages, delivering exceptional resolution, dynamic accuracy, and a refined tonal character suited for high-performance systems.
• Versatile Connectivity – With support for USB, coaxial, optical, and Ethernet streaming, the Mark Levinson No. 5101 integrates seamlessly into modern setups, ensuring flexible playback across multiple digital platforms.
• Robust Build Quality – Its heavy-machined aluminum chassis minimizes vibration and interference, enhancing overall sonic purity while maintaining the distinctive industrial aesthetic expected from Mark Levinson.
• Dimensions – Approx. 438 mm (W) × 130 mm (H) × 500 mm (D), offering a substantial footprint optimized for rigidity and internal component isolation.
• Weight – Around 16–18 kg, reflecting the premium power supply, reinforced chassis, and high-density digital circuitry.
For Prices LoginMark Levinson No. 5101
For Prices Login -
Focal Kanta N1 Bookshelf Speakers Pair with Stands
• Overview – The Focal Kanta N1 White/Black Bookshelf Speakers with Stands, released in 2018, are high-performance two-way standmount loudspeakers featuring Focal’s Beryllium tweeter and Flax mid-bass driver for exceptional clarity and precision.
• Advanced Driver Technology – The combination of Focal’s pure Beryllium inverted-dome tweeter and proprietary Flax sandwich cone mid-bass driver delivers remarkable transient speed, natural tonal balance, and highly detailed treble extension.
• Sonic Presentation – The Focal Kanta N1 White/Black Bookshelf Speakers with Stands produce expansive imaging, articulate midrange, and tight controlled bass, making them ideal for high-resolution stereo systems in medium-sized listening rooms.
• Specifications – Two-way bass reflex design, 6.5-inch Flax mid-bass driver, Beryllium inverted dome tweeter, 8-ohm nominal impedance, 88dB sensitivity, frequency response approximately 46Hz–40kHz, recommended amplifier power 25–150W.
• Dimensions – Each speaker measures approximately 422 mm high × 234 mm wide × 391 mm deep, while the dedicated stands elevate the speakers to optimal listening height for improved imaging.
• Weight – Each speaker weighs approximately 14 kg, while the matching stands add additional stability, supporting precise positioning and reduced cabinet vibration during high-output listening.
For Prices Login -
Mark Levinson No. 5101
• Mark Levinson No. 5101 – The Mark Levinson No. 5101 is a premium Class A analogue output CD/SACD player and network streamer offering refined musicality, wide dynamic range and high-resolution playback for modern high-end audio systems.
• Digital Processing & Converter Performance – Using a high-performance ESS Sabre Pro DAC with precision clocking and isolated digital pathways, it delivers exceptional resolution, low noise and accurate imaging for CD, SACD and streamed content.
• Streaming Integration & Connectivity – Supporting UPnP, network streaming, USB playback, coaxial/optical inputs and robust analogue RCA/XLR outputs, the Mark Levinson No. 5101 integrates seamlessly into sophisticated digital and hybrid audiophile systems.
• Discrete Analogue Stage & Sonic Character – Featuring Mark Levinson’s discrete, fully balanced PurePath analogue stage, it provides rich tonal density, precise transient control and natural harmonic structure across all music genres.
• Product Dimensions – Measures 438 mm (W) × 133 mm (H) × 457 mm (D), offering a rigid, resonance-controlled chassis engineered for stability and quiet mechanical operation.
• Product Weight – Weighing approximately 15.7 kg, the equipment benefits from a robust linear power supply and heavy internal architecture, reducing vibration and improving overall sonic clarity.
For Prices LoginMark Levinson No. 5101
For Prices Login -
SoulNote D-1 v2 DAC
• Overview – The SoulNote D-1 v2 DAC, released in 2022, is a solid-state digital-to-analogue converter featuring a fully balanced, non-negative-feedback analogue output stage for highly transparent, reference-quality digital music reproduction.
• Discrete Conversion Design – Employing SoulNote’s proprietary non-negative-feedback architecture and discrete analogue circuitry, the SoulNote D-1 v2 DAC delivers exceptional transient speed, low distortion, and remarkable harmonic realism from digital sources.
• Reference Digital Performance – The SoulNote D-1 v2 DAC reproduces music with expansive soundstaging, exceptional micro-detail, and natural tonal balance, making it an ideal partner for premium CD transports and network streamers.
New Type-R Circuit
The analogue circuit employs the “New Type-R Circuit” developed for SOULNOTE’s flagship phono equalizer E-3, optimized for the digital-to-analog. The power supply circuit also incorporates the same non-NFB regulator circuit found in D-2 ver.2.
For Prices LoginSoulNote D-1 v2 DAC
For Prices Login
Brand new unit in box that is sealed.