-
Borresen 05 Silver Supreme Edition
• Product Overview – The Børresen 05 Silver Supreme Edition (2021) is a high-end audiophile cable engineered with ultra-pure silver conductors, designed to maximize signal integrity, speed, and tonal resolution in reference-grade hi-fi systems.
• Conductor & Materials – Utilizing Advanced Silver Supreme conductors with extremely low resistance and optimized geometry, the Børresen 05 Silver Supreme Edition delivers exceptional transient speed, micro-detail retrieval, and noise suppression across complex musical passages.
• Sonic Performance – This cable emphasizes clarity, openness, and holographic imaging, offering a highly resolving yet natural presentation that complements high-resolution digital and analogue systems without introducing brightness or tonal imbalance.
• Specifications – Features ultra-high-purity silver conductors, advanced dielectric materials, mechanically tuned insulation, extremely low inductance and capacitance, and precision termination designed to preserve signal phase coherence and dynamic contrast.
• Dimensions – Supplied in standard audiophile cable lengths depending on configuration, with flexible construction allowing easy routing behind equipment racks while maintaining structural integrity and optimal conductor spacing.
• Weight – Moderate overall weight relative to cable length, reflecting dense silver conductor content and advanced shielding materials without excessive stiffness that could strain connectors or component sockets.
For Prices LoginBorresen 05 Silver Supreme Edition
For Prices Login -
TAD Evolution One TX
• Product Overview – The TAD Evolution One TX (2016) is a high-end floorstanding loudspeaker engineered in Japan, combining studio-grade accuracy with refined musicality for reference-level two-channel listening environments.
• Driver Technology – Utilizing TAD’s Coherent Source Transducer with beryllium tweeter and midrange diaphragm, the TAD Evolution One TX delivers exceptional phase coherence, pinpoint imaging, and ultra-low distortion across the audible spectrum.
• Cabinet & Voicing – A rigid, low-resonance enclosure with curved side panels minimizes standing waves, allowing the speaker to produce deep, controlled bass while preserving tonal neutrality and dynamic realism at high playback levels.
• Specifications – Nominal impedance 4 ohms, sensitivity approximately 90 dB, frequency response around 28 Hz–60 kHz, recommended amplifier power 50–300 W, optimized for high-current solid-state or quality tube amplification.
• Dimensions – Each speaker measures approximately 400 mm wide × 1,154 mm high × 530 mm deep, designed as a full-scale reference floorstander suitable for medium to large dedicated listening rooms.
• Weight – Each unit weighs roughly 95 kg, reflecting extensive internal bracing and premium materials that contribute to mechanical stability, resonance control, and consistent acoustic performance.
For Prices LoginTAD Evolution One TX
For Prices Login -
Audio Technica AT-LP120XBT Turntable
• Product Overview – The Audio Technica AT-LP120XBT Turntable (2019) is a direct-drive, solid-state beltless design featuring built-in phono stage and Bluetooth, combining DJ-inspired reliability with modern wireless vinyl playback convenience.
• Drive & Build Quality – Designed around a quartz-locked direct-drive motor, the Audio Technica AT-LP120XBT Turntable offers fast start-up, stable speed accuracy, low wow and flutter, and robust damping for vibration-resistant playback.
• Tonearm & Cartridge – Equipped with an S-shaped tonearm and factory-fitted AT-VM95E moving-magnet cartridge, this turntable delivers consistent tracking, clear midrange articulation, and an easy upgrade path within Audio-Technica’s VM series.
• Specifications – Supports 33⅓, 45, and 78 RPM speeds, Bluetooth SBC codec transmission, built-in switchable phono/line output, frequency response 20 Hz–20 kHz, and low wow and flutter rated below 0.2 percent.
• Dimensions – Measures approximately 452 mm wide × 352 mm deep × 141 mm high, providing a substantial, full-size footprint that fits standard hi-fi racks while maintaining operational stability during playback.
• Weight – Weighs roughly 8.0 kg, using a heavy chassis and rubber-damped platter to suppress resonance and improve rotational stability across different listening environments.
For Prices LoginAudio Technica AT-LP120XBT Turntable
For Prices Login -
Goldmund Telos 390.5
• Product Overview – The Goldmund Telos 390.5, released in 2018, is a solid-state Class AB integrated amplifier featuring an onboard DAC and preamplification stage, delivering exceptional transparency, precision timing, and superior dynamic handling.
• Advanced Signal Processing – Incorporating Goldmund’s Leonardo Time Correction technology, the Telos 390.5 ensures phase-accurate reproduction, improving soundstage coherence, transient precision, and natural musical flow across complex recordings.
• High-Current Drive – The amplifier’s robust output stage provides exceptional control over low-impedance speakers, while its ultra-low-noise architecture preserves micro-detail and maintains stability even under demanding dynamic loads.
• Construction Excellence – Precision-machined chassis, mechanical grounding, and internal vibration control systems allow the Goldmund Telos 390.5 to minimize resonance, ensuring purer signal delivery and long-term reliability.
• Dimensions – Approx. 440 mm (W) × 430 mm (D) × 135 mm (H), optimized to house its DAC module, preamp circuitry, and high-current output section within a resonance-controlled enclosure.
• Weight – Around 22 kg, reflecting its solid power supply, reinforced mechanical structure, and premium-grade components employed to meet Goldmund’s reference standards.
For Prices LoginGoldmund Telos 390.5
For Prices Login -
Goldmund Telos 280
• Product Overview – The Goldmund Telos 280, introduced in 2019, is a solid-state Class AB power amplifier delivering ultra-low distortion, exceptional control, and Goldmund’s proprietary mechanical grounding technology for superior signal purity.
• Precision Engineering – Utilizing advanced thermal management and optimized circuit topology, the Telos 280 provides remarkable transient accuracy, expansive dynamics, and a clean, stable output ideal for demanding high-end loudspeakers.
• Goldmund Signature Sound – The amplifier incorporates Leonardo Time Correction processing, ensuring phase accuracy and natural musical flow, allowing the Goldmund Telos 280 to excel in realism and three-dimensional imaging.
• Build Quality – Designed with a rigid chassis and vibration-damped architecture, the Telos 280 achieves outstanding noise reduction, improved component stability, and long-term reliability consistent with Goldmund’s reference standards.
• Dimensions – Approx. 440 mm (W) × 490 mm (D) × 135 mm (H), accommodating substantial internal shielding and Goldmund’s precision-machined structural elements.
• Weight – Around 25 kg, reflecting its robust transformer system, reinforced chassis, and high-current output stage required for premium performance.
For Prices LoginGoldmund Telos 280
For Prices Login -
Sumiko Rainier MM Cartridge
Product Overview – The Sumiko Rainier MM Cartridge (2018) is an entry-level moving-magnet design focused on musical balance, forgiving playback, and reliable performance, making it ideal for both new vinyl listeners and budget-conscious analogue systems.
• Stylus & Generator Design – Fitted with a bonded elliptical stylus and Sumiko’s carefully tuned generator, the Sumiko Rainier MM Cartridge delivers stable tracking, reduced surface noise, and consistent groove contact across a wide range of record conditions.
• Sonic Character – Voiced for warmth and smoothness, this cartridge emphasizes an easygoing tonal balance with rounded bass, relaxed treble, and cohesive midrange presentation suitable for long listening sessions.
• Specifications – Moving-magnet output approximately 5.0 mV, recommended load 47 kΩ, channel separation around 22 dB, frequency response roughly 15 Hz–25 kHz, optimized for lightweight to medium-mass tonearms.
• Dimensions – Standard half-inch mount cartridge body with compact Oyster-series proportions, ensuring straightforward alignment and compatibility with most headshells and tonearms used on entry-level and midrange turntables.
• Weight – Approximately 6.5 g, allowing easy balancing on most tonearms while maintaining stable tracking and consistent stylus pressure during playback.
For Prices LoginSumiko Rainier MM Cartridge
For Prices Login -
Sumiko Moonstone MM Cartridge
• Product Overview – The Sumiko Moonstone MM Cartridge (2018) is a high-performance moving-magnet design engineered for musical warmth, refined detail, and easy system matching with standard 47 kΩ phono inputs.
• Stylus & Generator Design – Utilizing a nude elliptical stylus and carefully tuned generator, the Sumiko Moonstone MM Cartridge delivers excellent groove contact, reduced distortion, and smooth tracking across demanding inner-groove passages.
• Sonic Character – Known for its natural midrange, controlled bass weight, and non-fatiguing treble, this cartridge emphasizes musical flow and tonal coherence over exaggerated detail or analytical presentation.
• Specifications – Moving-magnet output approximately 3.0 mV, recommended load 47 kΩ, channel separation around 30 dB, frequency response roughly 12 Hz–30 kHz, optimized for medium-mass tonearms.
• Dimensions – Standard half-inch mount cartridge body with compact proportions typical of Sumiko Oyster-series designs, allowing straightforward alignment and compatibility with a wide range of headshells and tonearms.
• Weight – Approximately 6.5 g, providing stable tracking performance while maintaining compatibility with most counterweight ranges and ensuring consistent stylus contact across varying record conditions.
For Prices LoginSumiko Moonstone MM Cartridge
For Prices Login -
Keces Ephono Phonoamp with External Power Supply
• Product Overview – Keces EPhono Phonoamp with External Power Supply, released in 2020, is a solid-state MM/MC phono preamplifier designed for low-noise vinyl playback with precision regulation and audiophile-grade circuit topology.
• Phono Stage Design – The fully discrete solid-state amplification employs ultra-low-noise components and short signal paths, delivering excellent channel balance, high transparency, and accurate RIAA equalisation for demanding analogue enthusiasts.
• External Power Supply Advantage – Separating the power supply from the audio circuitry reduces electromagnetic interference, allowing the Keces EPhono Phonoamp with External Power Supply to achieve superior noise suppression and improved dynamic contrast.
• Specifications – Supports MM and MC cartridges with selectable gain and loading, precision RIAA accuracy within ±0.3 dB, low output impedance, and wide frequency response optimised for high-resolution analogue reproduction.
• Dimensions – Compact dual-chassis design, phono stage approximately 240 mm (W) × 60 mm (H) × 180 mm (D), with matching external power supply sized for flexible placement near turntable systems.
• Weight – Combined weight approximately 3–4 kg, reflecting robust aluminium chassis construction and high-quality internal power regulation components for mechanical stability and long-term reliability.
For Prices Login -
Telos Grounding Noise Reducer GNR V5.1
• Product Overview – Telos Grounding Noise Reducer GNR V5.1, released in the early-2020s, is a passive noise-reduction grounding device engineered to lower system noise floors and stabilise reference grounding in high-resolution audio systems.
• Grounding Technology – Utilising Telos Audio Design’s proprietary grounding architecture, this unit absorbs and dissipates stray noise, leakage currents, and RF interference, improving background silence, micro-detail retrieval, and overall system coherence.
• Sonic Benefits – The Telos Grounding Noise Reducer GNR V5.1 enhances spatial clarity, low-level resolution, and tonal purity, particularly in complex systems where multiple digital, analogue, and power components share common grounding paths.
• Specifications – Passive grounding device with ultra-low impedance internal structure, non-magnetic chassis, resonance-controlled construction, and no active circuitry, ensuring zero signal insertion loss or dynamic compression during operation.
• Dimensions – Compact chassis designed for rack or floor placement, approximately 160 mm (W) × 80 mm (H) × 260 mm (D), allowing easy integration near source, amplifier, or power distribution components.
• Weight – Approximately 3–4 kg, reflecting dense internal materials used for vibration control and noise absorption without placing undue strain on shelving or equipment racks.
For Prices LoginTelos Grounding Noise Reducer GNR V5.1
For Prices Login -
SoulNote RSC Speaker Cables (3m)
• Product Overview – SoulNote RSC Speaker Cables (3m), released in the late-2010s, reflect SoulNote’s purist design philosophy, focusing on ultra-low loss signal transfer, mechanical resonance control, and natural musical expression.
• Cable Design Philosophy – Built using high-purity copper conductors and SoulNote’s resonance-controlled construction, these cables minimise stored energy and phase distortion, preserving timing accuracy, dynamics, and tonal neutrality across wideband loudspeakers.
• Sonic Performance – The SoulNote RSC Speaker Cables (3m) deliver fast transient response, clean bass articulation, and an open midrange, making them ideal for revealing high-resolution systems that prioritise realism and rhythmic coherence.
• Specifications – Low-resistance conductor geometry, carefully managed inductance and capacitance, non-magnetic materials throughout, and mechanically damped structure to reduce vibration-induced coloration and maintain consistent electrical characteristics.
• Dimensions – Each cable is supplied in a 3-metre length, offering practical reach for most floorstanding speaker placements while maintaining consistent impedance and signal integrity throughout the full run.
• Weight – Moderate overall mass reflecting solid conductor density and damping materials, designed to provide stability without placing excessive mechanical stress on amplifier or loudspeaker binding posts.
For Prices LoginSoulNote RSC Speaker Cables (3m)
For Prices Login -
Telos Audio Design Branda Signature Speaker Cables (2.5m Shotgun)
• Product Overview – Telos Audio Design Branda Signature Speaker Cables (2.5m Shotgun), part of Telos’s high-performance Branda Series, are meticulously engineered with premium materials and conductor geometry to deliver refined clarity and musical coherence.
• Cable Engineering – Designed with precision-stranded high-purity conductors, advanced dielectric materials, and heavy shielding, the Branda Signature cables minimise electromagnetic and radio-frequency interference while preserving timing and dynamic detail.
• Sonic Character – These cables offer a balanced tonal signature with articulate bass control, open midrange presence, and smooth treble extension, making them suitable for both high-resolution solid-state rigs and lively tube systems.
• Specifications – 2.5 m length “Shotgun” configuration, optimised conductor cross-section for low resistance and controlled inductance/capacitance, precision terminations for secure contact, and mechanical damping to reduce microphonics.
• Dimensions – Each cable pair measures 2.5 m, providing flexible reach for typical loudspeaker placements without excess slack, while retaining conductor integrity and consistent electrical performance.
• Weight – Moderate weight reflective of dense conductor and shielding construction, engineered to minimise strain on speaker and amplifier terminals while maintaining a tactile, confidence-inspiring feel.
For Prices Login -
Gryphon Essence Monoblock
• Product Overview – The Gryphon Essence Monoblock, a reference pure Class A power amplifier, delivers up to 220 W into 2 Ω per monoblock with zero negative feedback and extreme current reserves for demanding loudspeakers.
• Circuit & Topology – Gryphon Essence Monoblock, uses true dual-mono construction, independent driver and output power supplies, and high-current bipolar devices per monoblock, the amplifier offers ultra-low distortion, effortless transient authority, and deep control.
• Sonic Character – Known for exceptional neutrality, textural purity, and dynamic ease, the Essence Monoblock emphasises life-like midrange, detailed imaging, and low distortion across complex musical passages regardless of volume.
• Specifications – Rated at approx. 55 W into 8 Ω, 110 W into 4 Ω, and 220 W into 2 Ω with bandwidth to 350 kHz (-3 dB), extremely low output impedance (~0.0075 Ω), and a massive 880,000 µF power bank per unit.
• Dimensions – Each monoblock measures approximately 470 mm (W) × 240 mm (H) × 460 mm (D), embodying a substantial, precision-engineered chassis that supports thermal management and vibration resistance.
• Weight – Each amplifier weighs roughly 45 kg (99 lb), reflecting high-mass toroidal transformers, extensive capacitor banks, and rugged construction for optimal electrical stability and long-term performance.
For Prices LoginGryphon Essence Monoblock
For Prices Login -
HANA SL MK II MC Cartridge
• Product Overview – HANA SL MK II MC Cartridge, released in 2023, is a low-output moving-coil design engineered for purist analog systems seeking higher resolution and superior signal purity from dedicated MC phono stages.
• Generator Design – Updated MK II generator features improved Alnico magnet structure and refined coil winding techniques, reducing distortion while enhancing micro-detail retrieval, dynamic contrast, and low-level resolution across complex recordings.
• Sonic Performance – HANA SL MK II MC Cartridge delivers exceptional tonal balance, precise imaging, and extended frequency response, offering controlled bass, natural midrange textures, and refined treble for demanding vinyl enthusiasts.
• Specifications – Nude elliptical stylus on aluminum cantilever, 0.5 mV output, internal impedance approximately 30 ohms, recommended load above 400 ohms, optimized for high-quality low-noise moving-coil phono stages.
• Dimensions – Cartridge body measures approximately 28.5 mm (L) × 16 mm (W) × 16 mm (H), ensuring straightforward installation and compatibility with most standard half-inch mounted tonearms.
• Weight – Cartridge weight is approximately 5 g, allowing excellent compliance matching with low to medium-mass tonearms while maintaining stable tracking and consistent groove contact.
For Prices LoginHANA SL MK II MC Cartridge
For Prices Login -
HANA Umami Red MC Cartridge
• Product Overview – HANA Umami Red MC Cartridge, released in 2021, is a low-output moving-coil design using Alnico magnet technology and advanced body construction for maximum musicality, control, and long-term tonal consistency.
• Generator Architecture – Precision-wound copper coils and optimized magnetic flux geometry reduce distortion and improve phase coherence, delivering superior microdetail retrieval while preserving natural harmonic structure and dynamic expression.
• Sonic Character – HANA Umami Red MC Cartridge produces authoritative bass weight, lifelike midrange presence, and refined high-frequency extension, offering a balanced, emotionally engaging presentation suitable for reference-grade analog systems.
• Specifications – Nude microline stylus, boron cantilever, 0.4 mV output, internal impedance 8 ohms, recommended load above 80 ohms, optimized for high-quality moving-coil phono preamplifiers.
• Dimensions – Cartridge body measures approximately 28.5 mm (L) × 16 mm (W) × 16 mm (H), designed for standard half-inch mounting compatibility across most modern and vintage tonearms.
• Weight – Cartridge mass is approximately 10.5 g, providing excellent mechanical grounding and stable tracking when paired with medium to high-mass tonearms for controlled resonance behavior.
For Prices LoginHANA Umami Red MC Cartridge
For Prices Login -
Oppo BDP-93 Universal Player hello
• Product Overview – The Oppo BDP-93 Universal Player, released in 2010, is a reference-grade universal disc player supporting Blu-ray, DVD-Audio, SACD, and CD, engineered for high-performance home cinema and audiophile systems.
• Video Performance – Renowned for exceptional video processing, it uses the Marvell QDEO chipset to deliver superb scaling, low noise, and accurate colour reproduction across Blu-ray and legacy video formats.
• Audio Capability – The Oppo BDP-93 Universal Player provides bit-perfect digital output via HDMI and coaxial connections, supporting high-resolution audio formats while integrating seamlessly with external DACs and AV processors.
• Specifications – Supports Blu-ray 3D, SACD, DVD-Audio, CD, USB playback, Ethernet connectivity, dual HDMI outputs, and high-quality internal clocking for low-jitter audio and video signal transmission.
• Dimensions – Measures approximately 430 mm (W) × 79 mm (H) × 312 mm (D), fitting standard AV racks while maintaining adequate internal spacing for thermal stability and component longevity.
• Weight – Weighs roughly 5.5 kg, with a solid steel chassis and internal shielding that enhance mechanical rigidity and reduce electrical interference during playback.
For Prices LoginOppo BDP-93 Universal Player hello
For Prices Login -
Pro-Ject 2 Xperience Turntable
• Product Overview – The Pro-Ject 2 Xperience Turntable, released around 2006, is a belt-drive audiophile turntable designed to deliver low-noise vinyl playback with a rigid chassis and precision engineering focus.
• Sound Performance – Known for clean transients, stable imaging, and low mechanical coloration, this design emphasizes speed accuracy and tonal neutrality, appealing to listeners seeking an honest, musically balanced analogue presentation.
• Build Philosophy – The Pro-Ject 2 Xperience Turntable features a mass-loaded MDF plinth and decoupled motor system, reducing vibration transfer while maintaining excellent pitch stability and long-term mechanical reliability.
• Specifications – Equipped with a 9-inch carbon-fiber tonearm, precision belt drive, electronic speed change for 33/45 RPM, and an acrylic platter that improves resonance control and platter inertia.
• Dimensions – Measures approximately 460 mm (W) × 120 mm (H) × 340 mm (D), offering a full-size footprint suitable for dedicated hi-fi racks and stable turntable platforms.
• Weight – Weighs roughly 8.5 kg, providing sufficient mass for vibration damping while remaining manageable for careful setup and isolation tuning.
For Prices LoginPro-Ject 2 Xperience Turntable
For Prices Login -
Naim Audio NAC122X Preamplifier and NAP150X Power Amplifier
• Product Overview – The Naim Audio NAC122X Preamplifier and NAP150X Power Amplifier, released in 2006, is a solid-state Class AB separates combination delivering classic Naim pace, timing, and musical drive in a compact, upgradeable format.
• Musical Performance – This pairing is known for rhythmic coherence, strong dynamic contrast, and excellent midband clarity, making it an engaging match for efficient loudspeakers and listeners who value musical flow over hi-fi effects.
• System Synergy – The Naim Audio NAC122X Preamplifier and NAP150X Power Amplifier benefits from Naim’s modular power supply philosophy, allowing meaningful performance upgrades through external PSU options such as the FlatCap or HiCap.
• Specifications – The power amplifier delivers approximately 50 watts per channel into 8 ohms, with high current capability and stable operation into 4 ohms, optimized for real-world loudspeaker control rather than headline power figures.
• Dimensions – Each unit measures approximately 432 mm (W) × 87 mm (H) × 314 mm (D), sharing Naim’s compact full-width chassis design for easy rack integration and consistent system aesthetics.
• Weight – The preamplifier weighs around 6 kg, while the power amplifier weighs approximately 10 kg, reflecting Naim’s emphasis on robust power supplies and mechanically grounded construction.
For Prices Login -
Harman Kardon Citation 16 Power Amplifier
• Product Overview – The Harman Kardon Citation 16 Power Amplifier, released in 1976, is a solid-state Class AB design delivering high-current performance, wide bandwidth, and the authoritative control that defined Harman Kardon’s classic Citation series.
• High-Current Performance – Designed by Matti Otala, this amplifier is renowned for its low TIM distortion, fast transient response, and effortless dynamic swing, making it especially capable with demanding loudspeaker loads.
• Build & Sonic Character – The Harman Kardon Citation 16 Power Amplifier features a dual-mono layout with oversized power supply, producing a neutral, powerful, and tightly controlled sound that remains respected among vintage audiophiles.
• Specifications – Rated at approximately 150 watts per channel into 8 ohms and stable into 4 ohms, with wide frequency response and very low distortion for its era, emphasizing clean, unstrained power delivery.
• Dimensions – Measures approximately 445 mm (W) × 178 mm (H) × 406 mm (D), occupying a full-width chassis with substantial depth to accommodate its large transformer and heat dissipation requirements.
• Weight – Weighs roughly 27 kg, reflecting the heavy-duty power transformer, robust output stage, and solid steel chassis construction typical of high-end amplifiers from the Citation lineage.
For Prices LoginHarman Kardon Citation 16 Power Amplifier
For Prices Login -
Apogee Stage Speakers
• Product Overview – The Apogee Stage Speakers, released circa 1990, are full-range planar ribbon loudspeakers designed for high-resolution, low-distortion playback, delivering the open, fast transient response Apogee is renowned for.
• Ribbon Loudspeaker Performance – Featuring true ribbon midrange and tweeter elements, these speakers deliver lightning-fast transients, exceptional clarity, and expansive soundstaging that rewards high-quality amplification and careful system matching.
• Design & Sonic Character – The Apogee Stage Speakers use a dipole radiation pattern with large ribbon surfaces, producing natural tonal balance, deep image layering, and lifelike vocal reproduction unmatched by conventional dynamic driver designs.
• Specifications – Nominal impedance is approximately 3–4 ohms with sensitivity around 86 dB, requiring high-current amplifiers capable of stable low-impedance drive to unlock their full dynamic and tonal potential.
• Dimensions – Each speaker measures approximately 1220 mm (H) × 560 mm (W) × 60 mm (D), with a slim vertical profile that still demands adequate floor space and thoughtful room placement.
• Weight – Each speaker weighs roughly 32 kg, reflecting the substantial ribbon assemblies, rigid frame construction, and damping required for mechanical stability and accurate ribbon driver operation.
For Prices LoginApogee Stage Speakers
For Prices Login -
Krell KAV-300I Integrated Amplifier
• Product Overview – The Krell KAV-300I Integrated Amplifier was released in 1999 as a solid-state Class A/AB design, combining preamplifier and high-current power amplification for authoritative control and classic Krell drive.
• Amplification Performance – Delivering exceptional grip and dynamics, the amplifier provides effortless current delivery, wide bandwidth, and low noise, making it ideal for demanding loudspeakers and high-resolution analogue or digital sources.
• Build & Sonic Character – The Krell KAV-300I Integrated Amplifier features Krell’s robust power supply architecture, discrete circuitry, and minimalist signal path, resulting in tight bass, transparent midrange, and extended, controlled high frequencies.
• Specifications – Rated at approximately 150 W per channel into 8 ohms and 300 W into 4 ohms, with high-current output stages, wide frequency response, and stable operation into low-impedance speaker loads.
• Dimensions – Measures approximately 432 mm (W) × 178 mm (H) × 457 mm (D), requiring a sturdy, well-ventilated rack to accommodate its substantial chassis depth and heat dissipation.
• Weight – Weighs roughly 31 kg, reflecting its oversized transformer, large capacitor bank, and heavy aluminum chassis designed for mechanical stability and long-term electrical performance.
For Prices LoginKrell KAV-300I Integrated Amplifier
For Prices Login -
HANA SH MK II MC Cartridge
• Product Overview – HANA SH MK II MC Cartridge, released in 2023, is a high-output moving-coil design engineered to deliver moving-coil transparency while remaining compatible with standard moving-magnet phono stages.
• Generator Design – Revised MK II generator uses improved Alnico magnet assembly and refined coil winding, enhancing magnetic efficiency, lowering distortion, and improving transient response across complex musical passages.
• Sonic Performance – HANA SH MK II MC Cartridge offers a balanced, dynamic sound with articulate bass, open midrange, and extended treble, making it ideal for audiophiles seeking musicality without phono-stage upgrades.
• Specifications – Nude elliptical stylus on aluminum cantilever, 2.0 mV output, internal impedance 8 ohms, recommended load 47k ohms, optimized for high-quality MM inputs with strong signal integrity.
• Dimensions – Cartridge body measures approximately 28.5 mm (L) × 16 mm (W) × 16 mm (H), ensuring easy installation and compatibility with most standard half-inch mounted tonearms.
• Weight – Cartridge weight is approximately 5 g, allowing excellent compliance matching with low to medium-mass tonearms while maintaining stable tracking and consistent groove contact.
For Prices LoginHANA SH MK II MC Cartridge
For Prices Login -
Sumiko Pearl MM Cartridge
• Product Overview – The Sumiko Pearl MM Cartridge is a classic moving-magnet phono cartridge known for smooth, musical analogue playback, delivering balanced highs, defined mids, and rhythmic clarity that elevates everyday vinyl listening.
• Design & Engineering – Featuring a precision 0.3 × 0.7 mil elliptical stylus and high-purity copper coils, the Pearl’s generator and compliance are optimized for wide frequency response, detail retrieval, and stereo imaging.
• Analogue Character – With its evenly balanced tonal presentation and broad 12 Hz‒30 kHz response, the cartridge offers engaging bass, articulate midrange, and a forgiving high end for long listening sessions.
• Specifications – Moving Magnet design with ~4.0 mV output at 1 kHz, load impedance ~47 kΩ, compliance ~12×10⁻⁶ cm/dyn, and recommended tracking force ~2.0 g — ideal for most MM phono stages.
• Dimensions – Compact body measuring approx. 11.6 × 20.26 × 27.24 mm with bagged mounting and removable stylus, enabling easy setup on standard tonearms.
• Weight – Weighs about 6.0 g, balancing low mass for stability with sufficient tracking capability for sonic nuance and compatible tracking on a broad range of turntables.
For Prices LoginSumiko Pearl MM Cartridge
For Prices Login -
Sumiko Oyster MM Cartridge
• Product Overview – Sumiko Oyster MM Cartridge, a classic moving-magnet phono cartridge, offers a smooth, musical analogue presentation ideal for beginners or vinyl upgraders seeking superior performance over stock cartridges.
• Design & Performance – The Sumiko Oyster MM Cartridge features a bonded spherical stylus and rugged alloy cantilever, delivering engaging midrange, gentle high-frequency extension, and improved groove detail over entry-level designs.
• Analogue Character – The cartridge’s balanced tonal signature produces natural warmth and layered sound, making the Oyster especially enjoyable for everyday listening across diverse music genres.
• Specifications – Moving Magnet design with ~5.0 mV output, 30 Hz–20 kHz frequency response, recommended tracking force ~2.3 g, compliance ~12×10⁻⁶ cm/dyn, and 47 kΩ load impedance for broad MM compatibility.
• Dimensions – Compact and lightweight at approximately 18.2 mm × 18 mm × 30.5 mm, the Sumiko Oyster MM Cartridge suits most tonearms with standard half-inch mount and maintains rigid structural integrity.
• Weight – Weighing about 5.3 g, the cartridge’s low mass aids stable tracking and broad tonearm compatibility while remaining easy to align and adjust on a wide range of turntables.
For Prices LoginSumiko Oyster MM Cartridge
For Prices Login -
SOULNOTE D-3 DAC
• Overview – SOULNOTE D-3 DAC, released in 2020, is a reference-class digital-to-analog converter designed with SoulNote’s zero-feedback architecture to deliver highly accurate, ultra-low distortion conversion and musical transparency.
• Digital Architecture – Utilising discrete analogue filter stages and precision clocking, the D-3 DAC preserves timing integrity and dynamic expression, providing outstanding resolution and spatial coherence from PCM and DSD sources.
• Sound Quality – The SOULNOTE D-3 DAC is prized for its natural midrange clarity, refined treble extension, and low noise floor, allowing connected preamplifiers and amplifiers to reveal deeper musical nuance across genres.
For Prices LoginSOULNOTE D-3 DAC
For Prices Login
