-
TAD Evolution One TX
• Product Overview – The TAD Evolution One TX (2016) is a high-end floorstanding loudspeaker engineered in Japan, combining studio-grade accuracy with refined musicality for reference-level two-channel listening environments.
• Driver Technology – Utilizing TAD’s Coherent Source Transducer with beryllium tweeter and midrange diaphragm, the TAD Evolution One TX delivers exceptional phase coherence, pinpoint imaging, and ultra-low distortion across the audible spectrum.
• Cabinet & Voicing – A rigid, low-resonance enclosure with curved side panels minimizes standing waves, allowing the speaker to produce deep, controlled bass while preserving tonal neutrality and dynamic realism at high playback levels.
• Specifications – Nominal impedance 4 ohms, sensitivity approximately 90 dB, frequency response around 28 Hz–60 kHz, recommended amplifier power 50–300 W, optimized for high-current solid-state or quality tube amplification.
• Dimensions – Each speaker measures approximately 400 mm wide × 1,154 mm high × 530 mm deep, designed as a full-scale reference floorstander suitable for medium to large dedicated listening rooms.
• Weight – Each unit weighs roughly 95 kg, reflecting extensive internal bracing and premium materials that contribute to mechanical stability, resonance control, and consistent acoustic performance.
For Prices LoginTAD Evolution One TX
For Prices Login -
Innuos Statement Music Server 8TB Hard Disk
• Overview – The Innuos Statement Music Server 8TB Hard Disk, released in 2018, is a reference-grade music server and streamer featuring dual-linear power supplies, dedicated reclocking architecture, and 8TB internal storage for extensive music libraries.
• Reference Digital Architecture – Designed with separate power supplies for server and USB output sections, the Innuos Statement Music Server 8TB Hard Disk minimizes electrical noise and delivers exceptional timing precision for high-resolution playback.
• Advanced Streaming Performance – The Innuos Statement Music Server 8TB Hard Disk supports local music storage, UPnP streaming, Roon Core functionality, and major streaming services while providing a highly refined and natural sonic presentation.
• Specifications – 8TB internal hard disk storage, dual-linear power supplies, custom motherboard architecture, USB reclocking technology, Roon Core support, UPnP server functionality, Ethernet connectivity, SSD operating system drive.
• Dimensions – Measures approximately 420 mm (W) × 190 mm (H) × 350 mm (D), featuring a substantial dual-chassis design optimized for vibration control and electrical isolation.
• Weight – Weighs approximately 18.5 kg, reflecting extensive power supply implementation, premium chassis construction, and high-performance internal component selection.
For Prices LoginInnuos Statement Music Server 8TB Hard Disk
For Prices Login -
TW Acustic Raven AC3 Turntable
• TW Acustic Raven AC3 Turntable – A premier German-built analog turntable that combines a three-motor drive system with ultra-precise speed control and massive mass for reference-class vinyl playback.
• Precision Drive System – The TW Acustic Raven AC3 Turntable features dual high-torque motors plus a third motor synchronized via microcontroller for speed error under two nanoseconds per minute, yielding unmatched rhythm and stability.
• Exceptional Construction & Platter Design – With a 22 lb gel-filled platter topped with copper and a chassis machined to 0.0005” tolerance, the Raven AC3 provides deep tonal weight, low noise floor, and vivid dynamic expression.
• Multi-Tonearm Flexibility & Modular Upgrades – The Raven AC3 supports up to four tonearms with interchangeable armboards and offers later upgrades for motor units and control systems, catering to serious analog enthusiasts. Tone arm not included.
• Product Dimensions – The Raven AC3 Turntable measures approximately 450 × 400 mm (W×D) with a 600 × 400 mm total footprint and a substantial 30 kg (chassis only) build.
• Weight – Total system weight including platter, motor unit and control electronics is roughly 30 kg (chassis) + 10 kg platter + 2 kg control unit, ensuring exceptional stability and acoustical isolation.
For Prices LoginTW Acustic Raven AC3 Turntable
For Prices Login -
Vivid Audio G3 Speaker
Vivid Audio G3 S1 speaker with upgraded mesh tweeters.
For Prices LoginVivid Audio G3 Speaker
For Prices Login -
MBL N15 Monoblock
• Product Overview – MBL N15 Monoblock, released in 2019, is a solid-state Class AB monaural power amplifier delivering high-current authority, extreme stability, and effortless control for reference-grade loudspeaker systems.
• Amplification Architecture – Fully balanced signal topology with oversized power supplies ensures low noise, exceptional channel separation, and unwavering performance under demanding loads, reflecting MBL’s Noble Line engineering philosophy.
• Sonic Performance – MBL N15 Monoblock delivers immense dynamic headroom, deep bass grip, and expansive soundstage reproduction, maintaining tonal neutrality and composure even at high listening levels.
• Specifications – Rated at approximately 200 W into 8 ohms and 400 W into 4 ohms, with high-current output stages optimized for difficult speaker impedances and wide bandwidth signal handling.
• Dimensions – Each chassis measures approximately 480 mm (W) × 170 mm (H) × 480 mm (D), designed to integrate seamlessly into high-end audio racks while supporting robust internal power architecture.
• Weight – Each monoblock weighs approximately 33 kg, reflecting heavy-duty transformers, extensive heatsinking, and rigid construction essential for long-term thermal stability and sonic consistency.
For Prices LoginMBL N15 Monoblock
For Prices Login -
EMM Labs DA2 V3 DAC
• Overview – The EMM Labs DA2 V3 DAC, the updated flagship reference digital-to-analog converter, uses proprietary 16xDSD discrete DAC architecture, delivering extreme transparency, ultra-low jitter and refined dynamics for audiophiles.
• Digital Architecture – Built around EMM Labs’ discrete DAC modules and advanced clocking technology, the DA2 V3 offers remarkable resolution, phase integrity, and exceptionally low distortion across a wide range of source formats.
• Analogue Output – The analogue stage is designed for neutrality and musical coherence, providing a rich yet controlled presentation that preserves dynamic realism and timbral accuracy in high-fidelity playback.
• Specifications – Features proprietary dual differential DACs, high-isolation clocking, MDAT2™ signal processing, galvanic USB isolation, extensive format support including DSD and DXD, and robust analog outputs for balanced systems.
• Dimensions – Compact reference-class chassis measuring approximately 438 mm (W) × 400 mm (D) × 161 mm (H), precisely machined with premium finishes to match top-tier audio components.
• Weight – Significant mass for stable operation, weighing about 17.2 kg, reflecting substantial internal circuitry, shielding, and premium power supply design for sustained high performance.
(Comes without Streamer Card)
For Prices LoginEMM Labs DA2 V3 DAC
For Prices Login -
Soulnote M3 Mono Amplifier
• Overview – The Soulnote M3 Mono Amplifier, released in 2019, is a solid state pure Class A monoblock design engineered with zero global feedback topology to deliver ultra-fast transient response and uncompromised musical transparency.
• Circuit Architecture – Built around Soulnote’s non-parallel push-pull output stage and discrete driver design, the amplifier emphasizes instantaneous current delivery, wide bandwidth, and exceptionally low phase distortion.
• Sonic Character – The Soulnote M3 Mono Amplifier is celebrated for explosive dynamics, deep tonal saturation, and expansive soundstage layering, making it ideal for high-resolution loudspeakers requiring precision and authority.
• Specifications – Pure Class A solid state topology, approximately 200W into 8Ω and 400W into 4Ω, wide frequency response beyond 20Hz–100kHz, extremely low distortion, and high current capability for difficult loads.
• Dimensions – Each chassis measures approximately 454 mm wide × 189 mm high × 430 mm deep, requiring generous ventilation to support continuous Class A thermal operation.
• Weight – Each monoblock weighs roughly 32 kg, reflecting oversized transformers, heavy aluminum construction, and substantial heat sinking for stable, long-term performance.
For Prices LoginSoulnote M3 Mono Amplifier
For Prices Login -
Borresen BM3 Bass
• Overview – The Borresen BM3 Bass, released in 2023, is a reference-grade active bass module engineered to extend low-frequency performance and seamlessly integrate with compatible Børresen loudspeaker systems for greater scale and authority.
• Advanced Bass Technology – Utilizing Borresen’s proprietary iron-free magnetic motor technology and long-throw bass drivers, the Børresen BM3 Bass delivers exceptionally fast, controlled, and distortion-free low-frequency reproduction.
• Seamless System Integration – The Børresen BM3 Bass is designed to complement compatible Børresen loudspeakers, enhancing bass extension, dynamic headroom, and overall soundstage without compromising speed, coherence, or tonal balance.
Unique Crossover Topology
The Børresen Bass Module features a fully analog low-pass crossover derived directly from advanced Aavik amplifier designs. Unlike conventional subwoofers that rely on DSP-based filtering, this analog topology avoids signal delay and preserves timing accuracy. The crossover allows precise selection of cut-off frequencies between 30–80 Hz with a fixed 24 dB/octave slope, ensuring a natural and seamless transition. Fine level adjustment in 0.25 dB steps enables exact bass integration, while the internal crossover can be bypassed when using compatible Aavik electronics.
Advanced Noise Rejection
Noise rejection is fundamental to the performance of the Børresen Bass Module. Acoustic, electrical, and airborne noise are addressed through a comprehensive system of technologies developed across Audio Group Denmark. Active Tesla coils and active square Tesla coils suppress voltage spikes through counter-phase cancellation, dramatically lowering the noise floor. Analog Dither Technology amplifies the music signal while reducing background noise within the crossover circuits. Anti-Aerial Resonance Coil technology prevents RF interference from entering the signal path by absorbing and eliminating airborne noise. Together, these technologies create a purer, quieter environment where musical detail, clarity, and spatial definition can fully emerge.
For Prices LoginBorresen BM3 Bass
For Prices Login -
Gryphon Essence Preamp and Essence Stereo Amplifier
• System Overview – The Gryphon Essence Preamp and Essence Stereo Amplifier form a pure Class A amplification chain delivering ultra-low distortion, wide bandwidth and outstanding transparency, engineered for refined, high-end two-channel performance.
• Preamp Circuit Architecture – The preamplifier features fully discrete, dual-mono Class A gain stages with extremely short signal paths, ensuring exceptional clarity, low noise and holographic imaging, with one mention of Gryphon Essence Preamp and Essence Stereo Amplifier for synergy.
• Stereo Amplifier Power Delivery – The power amplifier operates in pure Class A with high current reserves, offering deep bass authority, superb transient behavior and stable operation with difficult loudspeaker loads, plus one additional reference to Gryphon Essence Preamp and Essence Stereo Amplifier.
• Design & Mechanical Integrity – Heavy aluminium chassis construction, vibration-controlled internal layout and premium component selection ensure long-term reliability, outstanding thermal management and a clean, uncolored sonic presentation.
• Product Dimensions – Preamp: approx. 480 mm (W) × 130 mm (H) × 410 mm (D). Stereo amplifier: approx. 480 mm (W) × 240 mm (H) × 490 mm (D), requiring a sturdy, well-ventilated shelf.
• Product Weight – Preamp weighs roughly 12 kg; stereo amplifier approx. 38 kg. The substantial mass and rigid chassis enhance resonance control, grounding stability and overall noise reduction.
For Prices Login -
SOULNOTE A-3 Reference Integrated Amplifier
• Overview – SOULNOTE A-3 Reference Integrated Amplifier, released in 2021, is a solid-state Class AB integrated design without DAC or phono, engineered for ultimate signal purity and unrestricted current delivery.
• Circuit Philosophy – Built around SoulNote’s zero-feedback, non-parallel architecture, the amplifier prioritises instantaneous current response, wide bandwidth, and natural harmonic flow, appealing strongly to purist audiophiles.
• Sonic Character – SOULNOTE A-3 Reference Integrated Amplifier delivers exceptional dynamic contrast, dense tonal colour, and expansive soundstage depth, excelling with difficult loudspeaker loads and revealing high-resolution source components.
• Specifications – Rated at approximately 120 W per channel into 8 ohms and 240 W into 4 ohms, with ultra-high current capability, wide frequency response, and discrete output devices optimised for low impedance control.
For Prices LoginSOULNOTE A-3 Reference Integrated Amplifier
For Prices Login -
SOULNOTE D-3 DAC
• Overview – SOULNOTE D-3 DAC, released in 2020, is a reference-class digital-to-analog converter designed with SoulNote’s zero-feedback architecture to deliver highly accurate, ultra-low distortion conversion and musical transparency.
• Digital Architecture – Utilising discrete analogue filter stages and precision clocking, the D-3 DAC preserves timing integrity and dynamic expression, providing outstanding resolution and spatial coherence from PCM and DSD sources.
• Sound Quality – The SOULNOTE D-3 DAC is prized for its natural midrange clarity, refined treble extension, and low noise floor, allowing connected preamplifiers and amplifiers to reveal deeper musical nuance across genres.
For Prices LoginSOULNOTE D-3 DAC
For Prices Login -
Soulnote P-3 Preamplifier
• Overview – The Soulnote P-3 Preamplifier, released in 2022, is a reference solid-state preamplifier featuring a fully balanced, non-negative-feedback analogue design engineered to deliver exceptional transparency and musical realism.
• Zero-Feedback Architecture – Employing Soulnote’s proprietary non-negative-feedback circuit topology, the Soulnote P-3 Preamplifier preserves transient accuracy, harmonic integrity, and dynamic expression while maintaining an exceptionally low noise floor.
• Reference-Level Engineering – The Soulnote P-3 Preamplifier features dual-mono construction, discrete analogue circuitry, and mechanically isolated assemblies, delivering expansive soundstaging, precise imaging, and outstanding channel separation for flagship audio systems.
Type-R circuits are used inside the non-NFB balance amplifier
The output line amplifier uses Type-R discrete non-NFB balance circuits that have been finely tuned for preamplifier use. It also includes the newly-developed super high-quality naked foil resistors. With 1ohm emitter resistors and 3.9ohm output resistance, it delivers astonishing information detail and S/N presence for superior power preamplifier drive capabilities.
High-end resistance switching method audio volume control circuit
The best possible methods and the highest-quality parts create the best audio volume control. All the resistors in this unit are ultra high-quality, naked foil resistors. The switching relays also use the newly developed RSR-2-12D (Reference SOULNOTE Relay) ultralow loss custom relay. Volume control is configured with 144 steps in 0.5 dB intervals. Vibrancy and sound quality remain unaffected, even when lowering the volume.
RSR-2-12D (Reference SOULNOTE Relay)
An ultra-low loss glass tube sealed reed relay that performs similar to a mercury relay as a base has been further customized. This is an original custom relay created by SOULNOTE that can reach sound quality levels comparable to that of wire. Each P-3 contains 94 of these relays.
For Prices LoginSoulnote P-3 Preamplifier
For Prices Login -
FM Acoustics 245 Pre Amp and F10B Power Amp
• Overview – FM Acoustics 245 Pre Amp and F10B Power Amp, released circa 1995, form a reference-grade solid-state amplification system focused on extreme linearity, ultra-low noise, and uncompromising signal purity.
• Preamplifier Design – The FM Acoustics 245 preamplifier is engineered for absolute transparency, offering exceptional channel separation, precision volume control, and vanishingly low distortion for the most revealing analog and digital sources.
• Power Amplification – Designed for stability and control, the pairing delivers effortless dynamics, tight bass authority, and a neutral tonal balance, allowing loudspeakers to perform without coloration or compression at any listening level.
• Specifications – F10B delivers approximately 250 watts per channel into 8 ohms, doubling into lower impedances, with extremely low THD, wide bandwidth, high damping factor, and fully discrete, DC-coupled circuit topology.
• Dimensions – FM Acoustics 245 Pre Amp and F10B Power Amp: Preamp approx. 445 mm (W) × 140 mm (H) × 430 mm (D); power amplifier approx. 445 mm (W) × 260 mm (H) × 520 mm (D), designed for professional-grade rack integration.
• Weight – Preamp approximately 20 kg; power amplifier approximately 75 kg, reflecting massive power supplies, extensive shielding, and precision-machined chassis construction essential to FM Acoustics’ reference performance standards.
For Prices LoginFM Acoustics 245 Pre Amp and F10B Power Amp
For Prices Login -
Mark Levinson No.53 Reference Monoblock
• Product Overview – Mark Levinson No.53 Reference Monoblock, released in 2009, is a solid-state Class D reference amplifier using proprietary PWM switching architecture, delivering extreme power, efficiency, and absolute control over demanding loudspeakers.
• Reference Engineering – Designed as a no-compromise statement, the amplifier employs separate digital control, analog audio, and power sections, ensuring ultra-low noise, massive current delivery, and exceptional stability under real-world loads.
• Sound Performance – Renowned for its effortless dynamics, expansive soundstage, and iron-fisted bass control, the Mark Levinson No.53 Reference Monoblock combines transparency with authority rarely achieved in high-power amplification.
• Specifications – Rated at 500 W into 8 ohms, 1000 W into 4 ohms, with stable operation into 2 ohms, ultra-wide bandwidth, low distortion, and advanced thermal and protection monitoring systems.
• Dimensions – Each chassis measures approximately 483 mm (W) × 241 mm (H) × 610 mm (D), featuring substantial heatsinking and an industrial-grade enclosure engineered for long-term reference operation.
• Weight – Each monoblock weighs approximately 61 kg, reflecting its massive power supply, high-density construction, and mechanical rigidity essential for vibration control and electrical stability.
For Prices LoginMark Levinson No.53 Reference Monoblock
For Prices Login -
Ansuz D-TC Gold Signature Power Switch
• Overview – The Ansuz D-TC Gold Signature Power Switch, released in 2022, is a flagship audiophile network switch engineered with Gold Signature Tesla Coil technology to maximize digital streaming performance through ultra-low-noise Ethernet signal transmission.
• Gold Signature Noise Suppression – Utilizing Active Tesla Coil, Active Zirconium Tesla Coil, Dither Technology, and Anti-Aerial Resonance Coil technologies, the Ansuz D-TC Gold Signature Power Switch dramatically reduces electrical and network-borne noise for exceptional sonic purity.
• Reference Digital Performance – The Ansuz D-TC Gold Signature Power Switch features precision clocking, resonance-controlled construction, and advanced power regulation, delivering superior timing accuracy, enhanced soundstage depth, and remarkable low-level detail retrieval.
A golden generation in performance
The Ansuz PowerSwitch D-TC Gold Signature is Ansuz top-of-the-line ethernet distributor. It is equipped with Ansuz most sophisticated and most advanced noise reduction, resonance control and dither technologies, which has been further optimized by the implementation of gold and zirconium. The result is a refined authenticity and a lifelike musical experience.
The challenge was to find the optimal amount of gold in the composition with silver and copper. The result is the Ansuz Gold Signature series, which presents the music with an extremely clear, natural and sonic reproduction.For Prices LoginAnsuz D-TC Gold Signature Power Switch
For Prices Login -
Ansuz D-TC Gold Signature Power Box
• Overview – The Ansuz D-TC Gold Signature Power Box, released in 2022, is a flagship external linear power supply featuring Gold Signature Tesla Coil technology, engineered to provide ultra-low-noise DC power for compatible Ansuz network switches.
• Flagship Power Conditioning – Utilizing Active Tesla Coil, Active Zirconium Tesla Coil, Dither Technology, and Anti-Aerial Resonance Coil technologies, the Ansuz D-TC Gold Signature Power Box dramatically suppresses electrical noise while maximizing signal integrity and timing precision.
• Ultimate Streaming Performance – The Ansuz D-TC Gold Signature Power Box enhances compatible Ansuz network switches by delivering cleaner DC power, resulting in improved micro-detail, deeper soundstaging, superior dynamics, and more natural musical presentation.
A golden generation in performance
The Ansuz PowerBox D-TC Gold Signature is Ansuz top-of-the-line power box. It is equipped with Ansuz most sophisticated and most advanced noise reduction, resonance control and dither technologies, which has been further optimized by the implementation of gold and zirconium. The result is a refined authenticity and a lifelike musical experience.
The challenge was to find the optimal amount of gold in the composition with silver and copper. The result is the Ansuz Gold Signature series, which presents the music with an extremely clear, natural and sonic reproduction.For Prices LoginAnsuz D-TC Gold Signature Power Box
For Prices Login -
Audiovector R5 Arrete Speakers
• Overview – The Audiovector R5 Arreté Speakers, released in 2021, are premium 3-way floorstanding loudspeakers featuring Audiovector’s Air Motion Transformer tweeter and Freedom Grounding® technology for exceptional transparency and musical realism.
• Advanced Driver Technology – Utilizing an Arreté AMT tweeter, carbon-fibre sandwich midrange and bass drivers, plus Audiovector’s Freedom Grounding® system, the Audiovector R5 Arreté Speakers deliver outstanding transient speed, low distortion, and remarkable sonic openness.
• Reference Musical Performance – The Audiovector R5 Arreté Speakers reproduce music with holographic imaging, expansive soundstaging, deep controlled bass, and effortless dynamics, making them equally impressive for both critical listening and everyday enjoyment.
For Prices LoginAudiovector R5 Arrete Speakers
For Prices Login -
YG Acoustics Hailey 2.2
• YG Acoustics Hailey 2.2 – This reference-level loudspeaker employs BilletCore drivers, aerospace-grade aluminum cabinets, and advanced crossover topology to deliver ultra-low distortion, immense dynamic headroom, and world-class musical transparency.
• BilletCore Precision Drivers – Machined from solid aluminum, the Hailey 2.2’s midbass and bass units provide exceptional rigidity, lightning-fast transient response, and unparalleled clarity, revealing microdetails with absolute accuracy.
• ForgeCore Tweeter Technology – The optimized YG Acoustics Hailey 2.2 tweeter motor structure achieves ultra-low distortion and smooth high-frequency extension, contributing to expansive imaging, refined airiness, and a remarkably coherent full-range presentation.
• Ultra-Rigid Aluminum Enclosure – CNC-machined panels create an inert, resonance-free structure, allowing the drivers to operate with maximum stability and producing a controlled, transparent and highly immersive soundstage.
• Dimensions – Approx. 1143 mm (H) × 368 mm (W) × 559 mm (D). A substantial, acoustically optimized footprint ensures full-range reproduction and precise room integration.
• Weight – Approximately 86 kg per speaker, providing extreme structural rigidity and vibration control for the lowest possible distortion and maximum sonic purity.
For Prices LoginYG Acoustics Hailey 2.2
For Prices Login -
Kondo Melius Power Amplifier
Specifications
• Type: Vacuum Tube Power Amplifier
• Output Power: 50W per channel (Class A, push-pull)
• Tubes: 4 × 6550 / KT88, 2 × 12AU7, 2 × 12AX7
• Frequency Response: 10Hz – 100kHz (±1dB)
• Input Impedance: 100kΩ
• Output Impedance: 4Ω / 8Ω
• Dimensions: 460 × 280 × 390 mm
• Weight: 35 kg
• Made in Japan
For Prices LoginKondo Melius Power Amplifier
For Prices Login -
Gryphon Essence Monoblock
• Product Overview – The Gryphon Essence Monoblock, a reference pure Class A power amplifier, delivers up to 220 W into 2 Ω per monoblock with zero negative feedback and extreme current reserves for demanding loudspeakers.
• Circuit & Topology – Gryphon Essence Monoblock, uses true dual-mono construction, independent driver and output power supplies, and high-current bipolar devices per monoblock, the amplifier offers ultra-low distortion, effortless transient authority, and deep control.
• Sonic Character – Known for exceptional neutrality, textural purity, and dynamic ease, the Essence Monoblock emphasises life-like midrange, detailed imaging, and low distortion across complex musical passages regardless of volume.
• Specifications – Rated at approx. 55 W into 8 Ω, 110 W into 4 Ω, and 220 W into 2 Ω with bandwidth to 350 kHz (-3 dB), extremely low output impedance (~0.0075 Ω), and a massive 880,000 µF power bank per unit.
• Dimensions – Each monoblock measures approximately 470 mm (W) × 240 mm (H) × 460 mm (D), embodying a substantial, precision-engineered chassis that supports thermal management and vibration resistance.
• Weight – Each amplifier weighs roughly 45 kg (99 lb), reflecting high-mass toroidal transformers, extensive capacitor banks, and rugged construction for optimal electrical stability and long-term performance.
For Prices LoginGryphon Essence Monoblock
For Prices Login -
Wilson Audio Sasha DAW Floorstanding Speakers
The Wilson Audio Sasha DAW Floorstanding Speakers represents the pinnacle of precision engineering and musical refinement. Designed in tribute to the late David A. Wilson, this loudspeaker embodies the legacy of innovation, craftsmanship, and emotional engagement that has defined Wilson Audio for decades. A true reference-level transducer, the Sasha DAW delivers breathtaking realism with authoritative control and lifelike presence.
Type: 3-way floorstanding loudspeaker
• Drivers:
• 1 × 25 mm Convergent Synergy Tweeter
• 1 × 178 mm Midrange
• 2 × 200 mm Woofers
• Frequency Response: 20 Hz – 30 kHz (±3 dB)
• Sensitivity: 91 dB @ 1W / 1m
• Nominal Impedance: 4 Ω
• Dimensions (H×W×D): 1138 × 368 × 579 mm
• Weight: 107 kg each (approx.)
• Available Finishes: WilsonGloss Premium automotive paint
• Designer: Daryl Wilson
For Prices Login -
Sonus Faber Homage Amati G5
• Sonus Faber Homage Amati G5 – This flagship 3.5-way floorstanding speaker blends artisanal craftsmanship with advanced acoustic engineering, delivering breathtaking musicality, deep emotional engagement, and reference-level performance in refined listening rooms.
• Advanced Driver System – Featuring a redesigned midrange with a cellulose-pulp diaphragm and powerful woofers, the Amati G5 produces exceptional coherence, rich tonal density, and authoritative bass extension with superb transient accuracy.
• Stealth Ultraflex & Organic Cabinet Design – The variable-geometry porting system and lute-shaped enclosure minimize turbulence and resonance, resulting in cleaner low frequencies, improved dynamics, and an expansive holographic soundstage.
• Crossover & Mechanical Refinement – The latest Homage crossover employs premium Clarity Cap capacitors and carefully tuned phase behavior, ensuring seamless driver integration, smooth response, and unrestricted musical flow across all genres.
• Dimensions – Approx. 1171 mm (H) × 411 mm (W) × 512 mm (D). Sculpted cabinet crafted with real wood, leather accents, and curved sidewalls for optimal acoustics and elegant visual presence.
• Weight – Approximately 55 kg per Sonus Faber Homage Amati G5 speaker, offering exceptional structural rigidity, vibration control, and mechanical stability to support ultra-low-distortion performance.
For Prices LoginSonus Faber Homage Amati G5
For Prices Login -
Marten Design Coltrane Tenor
• Overview – The Marten Design Coltrane Tenor, released in 2010, is a reference-grade floorstanding loudspeaker featuring diamond tweeter technology, ceramic drivers, and advanced cabinet engineering for uncompromising musical realism.
• Diamond & Ceramic Driver Technology – Utilizing Accuton diamond tweeters and ceramic midrange/bass drivers, the Marten Design Coltrane Tenor delivers exceptional transient speed, ultra-low distortion, and remarkable resolution across the audible spectrum.
• Reference-Level Sound Reproduction – The Marten Design Coltrane Tenor is renowned for its holographic imaging, expansive soundstage, and natural tonal balance, presenting music with extraordinary precision and emotional engagement.
• Specifications – 3-way bass reflex floorstanding design, 4-ohm nominal impedance, 89 dB sensitivity, frequency response 24Hz–100kHz, diamond tweeter, ceramic midrange and bass drivers, recommended amplifier power 50–400 watts.
• Dimensions – Measures approximately 1200 mm (H) × 260 mm (W) × 500 mm (D), featuring a meticulously braced cabinet optimized for resonance control and acoustic transparency.
• Weight – Approximately 65 kg per speaker, reflecting premium cabinet construction, advanced driver technology, and extensive internal damping for maximum performance stability.
For Prices LoginMarten Design Coltrane Tenor
For Prices Login -
Avantgarde Uno SD iTRON G3 Active
• Product Overview – Avantgarde Uno SD iTRON G3 Active, released in 2020, is an active horn loudspeaker using solid-state iTRON amplification, delivering extreme efficiency, dynamic realism, and live-performance scale.
• Horn Technology – The spherical midrange and tweeter horns deliver exceptional sensitivity, controlled directivity, and lightning-fast transient response, creating an immersive soundstage with effortless dynamics and low distortion.
• Active System Design – Fully active architecture integrates dedicated amplification and DSP-controlled crossover, ensuring optimal driver control, precise phase alignment, and consistent performance regardless of partnering source components.
• Specifications – Nominal sensitivity exceeds 104 dB, with powered bass modules driven by integrated amplifiers, wide frequency response, and ultra-low compression, enabling realistic playback at low and high listening levels.
• Dimensions – Approx. 1,570 mm (H) × 650 mm (W) × 540 mm (D) per speaker, with modular horn and bass sections designed for stable placement in medium to large listening environments.
• Weight – Approximately 70 kg per speaker, reflecting the robust cabinet construction, high-mass horn assemblies, and integrated amplification required for vibration control and acoustic precision.
For Prices LoginAvantgarde Uno SD iTRON G3 Active
For Prices Login
