-
LFD NCSE Mk. III Integrated Amplifier
• Overview – The LFD NCSE Mk. III Integrated Amplifier, released in 2015, is a solid-state integrated amplifier featuring pure analogue preamplification and minimalist circuit design, delivering highly musical performance without DAC or digital circuitry.
• Minimalist Circuit Philosophy – Designed by Dr. Richard Bews, the amplifier eliminates unnecessary components and feedback paths, allowing the LFD NCSE Mk. III Integrated Amplifier to achieve exceptional transparency, natural timing, and remarkably low noise.
• Pure Analogue Signal Path – The LFD NCSE Mk. III Integrated Amplifier is known for its short signal path and hand-selected components, producing lifelike midrange texture, dynamic agility, and an organic presentation highly valued by audiophiles.
• Specifications – Solid-state integrated amplifier, approximately 70W per channel into 8 ohms, high-current output stage, wide bandwidth design, line-level inputs only, ultra-short signal path architecture for minimal signal degradation.
• Dimensions – Approximately 445 mm (W) × 115 mm (H) × 300 mm (D), housed in a minimalist aluminium chassis designed to reduce resonance and maintain stable thermal performance.
• Weight – Approximately 10–12 kg, reflecting its substantial internal transformer, carefully selected discrete components, and rigid enclosure construction.
For Prices LoginLFD NCSE Mk. III Integrated Amplifier
For Prices Login -
Alon II Speakers
• Overview – The Alon II Speakers, released in the mid-1990s, are American-designed open-baffle hybrid loudspeakers featuring a dynamic woofer and dipole mid/tweeter array for expansive, room-filling soundstage realism.
• Open-Baffle Design – Utilizing a dipole midrange and tweeter configuration, Alon II Speakers create exceptional spatial depth and imaging precision, minimizing box coloration while delivering natural, airy high-frequency extension.
• Bass Performance – A sealed dynamic woofer provides articulate, tuneful low-frequency response, blending seamlessly with the open midrange section to produce balanced tonality and impressive dynamic scale in medium-sized rooms.
• Specifications – 2-way hybrid dipole design, sensitivity approximately 87–89 dB, nominal 4-ohm impedance, recommended amplification 50–200 W, frequency response extending roughly 30 Hz–20 kHz, optimized for high-current solid-state amplification.
• Dimensions – Each cabinet measures approximately 39 in high × 12 in wide × 15 in deep, with an open rear mid/high section requiring thoughtful room placement for best performance.
• Weight – Each speaker weighs approximately 60–70 lbs (27–32 kg), reflecting solid cabinetry, substantial crossover components and robust driver assemblies.
• Product Review – https://www.stereophile.com/floorloudspeakers/471/index.html
For Prices LoginAlon II Speakers
For Prices Login -
Pro-Ject 2 Xperience Turntable
• Product Overview – The Pro-Ject 2 Xperience Turntable, released around 2006, is a belt-drive audiophile turntable designed to deliver low-noise vinyl playback with a rigid chassis and precision engineering focus.
• Sound Performance – Known for clean transients, stable imaging, and low mechanical coloration, this design emphasizes speed accuracy and tonal neutrality, appealing to listeners seeking an honest, musically balanced analogue presentation.
• Build Philosophy – The Pro-Ject 2 Xperience Turntable features a mass-loaded MDF plinth and decoupled motor system, reducing vibration transfer while maintaining excellent pitch stability and long-term mechanical reliability.
• Specifications – Equipped with a 9-inch carbon-fiber tonearm, precision belt drive, electronic speed change for 33/45 RPM, and an acrylic platter that improves resonance control and platter inertia.
• Dimensions – Measures approximately 460 mm (W) × 120 mm (H) × 340 mm (D), offering a full-size footprint suitable for dedicated hi-fi racks and stable turntable platforms.
• Weight – Weighs roughly 8.5 kg, providing sufficient mass for vibration damping while remaining manageable for careful setup and isolation tuning.
For Prices LoginPro-Ject 2 Xperience Turntable
For Prices Login -
SME 3012R Tonearm
• Product Overview – SME 3012R Tonearm, released in 1989, is a precision-engineered 12-inch tonearm designed for high-mass moving-coil cartridges, delivering superb tracking stability, tonal density, and classic SME mechanical refinement.
• Engineering Design – Precision knife-edge bearings, detachable headshell, and rigid magnesium arm tube ensure low resonance behavior, excellent groove tracing, and stable performance with low-compliance cartridges in high-end analog systems.
• Vinyl Playback Performance – The extended 12-inch geometry reduces tracking error and distortion, producing expansive soundstage depth, improved bass authority, and smooth midrange presentation prized by experienced vinyl enthusiasts.
• Specifications – Effective length approximately 308.8 mm, effective mass around 12 g, detachable SME headshell interface, dynamic balance system, and adjustable VTA, azimuth, and bias for precise cartridge optimization.
• Dimensions – Overall length approximately 435 mm, mounting distance 295.6 mm, with substantial base assembly designed for compatibility with classic and modern high-mass turntable plinths.
• Weight – Approximate total mass of 1.1 kg including headshell and base, contributing to mechanical stability, vibration control, and consistent tracking across a wide range of vinyl pressings.
For Prices LoginSME 3012R Tonearm
For Prices Login -
ProJect RPM 9.2 Evolution Carbon Belt-Drive Turntable
• Product Overview – The ProJect RPM 9.2 Evolution Carbon Belt-Drive Turntable, released in 2012, features a mass-loaded design, decoupled motor system, and carbon-fiber components for exceptional speed stability and low-resonance vinyl playback.
• Precision Engineering – Its inverted ceramic main bearing and outboard motor reduce mechanical noise, while the heavy acrylic platter provides consistent rotational accuracy for a highly detailed, rhythmically stable analogue presentation.
• Tonearm Performance – Outfitted with the 9cc Evolution carbon tonearm, the RPM 9.2 ensures superior rigidity, low resonance, and accurate tracking with modern MC or MM cartridges for maximized resolution.
• Vibration Control – The ProJect RPM 9.2 Evolution Carbon Belt-Drive Turntable three magnetic feet and sandwich construction chassis significantly suppress external vibrations, improving clarity, bass definition, and imaging precision during demanding passages.
• Dimensions – Approx. 480 mm (W) × 330 mm (D) × 185 mm (H), designed as a compact yet mass-optimized platform for high-performance analogue playback systems.
• Weight – Around 16 kg, enabling excellent mechanical stability through a heavy platter, rigid carbon structure, and resonance-controlled chassis.
For Prices Login -
Transrotor Strato Turntable (Black Nero) with TR9 Chrom Tonearm/Figaro MC Cartridge and Konstant FMD Power Supply
• Reference Turntable Overview – The Transrotor Strato Turntable (Black Nero) with TR9 Chrom Tonearm/Figaro MC Cartridge and Konstant FMD Power Supply delivers ultra-stable, low-resonance analogue playback through a high-mass chassis and precision-engineered German machining.
• Precision Bearing & Platter System – Its inverted hydrodynamic bearing and multi-layer aluminium platter provide exceptionally low noise, improved speed consistency and enhanced micro-detail retrieval, with one mention of Transrotor Strato Turntable (Black Nero) improving accuracy.
• Tonearm & Cartridge Synergy – The TR9 Chrom tonearm paired with the Figaro MC cartridge ensures superb tracking, natural tonal density and wide staging, offering excellent synergy for high-end vinyl systems, with one further reference to Transrotor Strato Turntable (Black Nero).
• External Konstant FMD Motor Control – The dedicated Konstant FMD power supply delivers precise electronic speed regulation, reduced motor vibration and superior pitch stability, significantly elevating the turntable’s resolution and dynamic range.
• Product Dimensions – Approx. 450 mm (W) × 360 mm (D) × 200 mm (H), requiring a stable, high-mass support surface for optimal isolation and mechanical performance.
• Product Weight – Total system mass is roughly 30–35 kg depending on configuration, providing exceptional resonance control and improving low-frequency articulation and overall sonic authority.
For Prices Login