-
Edge G3 Integrated Amplifier
• Overview – The Edge G3 Integrated Amplifier, released in the early 2000s, is a solid state Class AB integrated amplifier featuring high-current output stages and refined preamplification for authoritative, full-range loudspeaker control.
• Power & Drive – Delivering substantial current capability, Edge G3 Integrated Amplifier provides confident bass authority and stable performance into demanding loads, maintaining composure and dynamic headroom during complex musical passages.
• Build & Circuitry – Built with robust chassis construction and dual-mono inspired layout, the design emphasizes short signal paths and substantial power supply reserves to preserve transparency and channel separation.
• Specifications – Solid state Class AB topology, approximately 100–150 watts per channel into 8 ohms, high-current output stage, multiple line-level inputs, frequency response extending beyond 20 Hz–20 kHz with low distortion.
• Dimensions – Approximate dimensions are 430 mm wide × 150 mm high × 400 mm deep, providing substantial internal transformer space while fitting standard hi-fi racks.
• Weight – Weighing approximately 18–22 kg, the amplifier’s mass reflects its large power transformer and heat-sinking required for sustained high-current operation.
For Prices LoginEdge G3 Integrated Amplifier
For Prices Login -
Eminent Technology LFT16
• Planar Loudspeaker Design – Eminent Technology LFT16, released in 1991, is a full-range planar-magnetic loudspeaker delivering exceptionally fast transient response, low coloration, and expansive soundstage realism prized by serious audiophiles.
• Open-Baffle Transparency – The dipole radiation pattern minimizes box coloration, allowing Eminent Technology LFT16 to produce open, natural midrange clarity and lifelike spatial imaging when carefully positioned in dedicated listening rooms.
• High-End System Synergy – Designed for quality amplification, the speaker excels with stable, high-current amplifiers, rewarding careful matching with refined dynamics, controlled bass extension, and coherent large-scale musical presentation.
• Specifications – Nominal impedance is approximately 4 ohms, sensitivity around 86 dB, and recommended amplifier power ranges from 100 watts upward to fully exploit planar-magnetic dynamic capability.
• Dimensions – Each panel measures approximately 2030 mm high, 560 mm wide, and 50 mm deep, creating an imposing visual presence optimized for spacious listening environments.
• Weight – Each speaker weighs roughly 41 kg, with the substantial frame construction contributing to mechanical stability and consistent planar driver performance.
For Prices LoginEminent Technology LFT16
For Prices Login -
Harmonix XDC-2 Power Cable (1.5m)
• Overview – Harmonix XDC-2 Power Cable, released in the early 2000s, is a Japanese audiophile-grade power cable designed to prioritise tonal naturalness, musical flow, and noise reduction over sheer current delivery.
• Design Philosophy – Developed using Harmonix’s tuning-by-ear approach, the cable focuses on resonance control, material synergy, and vibration damping to achieve a relaxed, organic presentation across analog and digital components.
• Sonic Performance – Harmonix XDC-2 Power Cable is renowned for smooth treble, rich midrange tonality, and coherent timing, making it especially attractive for tube systems and musically voiced solid-state equipment.
• Specifications – High-purity copper conductors, moderate gauge design, carefully selected dielectric materials, effective mechanical damping, and high-quality connectors optimized for stable contact and consistent AC power transfer.
• Dimensions – Commonly supplied in approximately 1.5 m length, featuring a flexible outer jacket that allows easy routing while maintaining consistent electrical and mechanical characteristics.
• Weight – Approximately 0.9 kg per cable, reflecting dense conductor materials and internal damping without excessive stiffness or stress on component IEC sockets.
For Prices LoginHarmonix XDC-2 Power Cable (1.5m)
For Prices Login -
Harmonix SYN 100 Spikes and RF909x Spike Base
• Product Overview – Harmonix SYN 100 Spikes and RF909x Spike Base, released in the mid-2000s, are vibration control accessories designed to optimize mechanical grounding, resonance dissipation, and tonal balance in high-end audio systems.
• Tuning Philosophy – Developed using Harmonix’s tuning-based approach, the combination controls energy flow rather than fully isolating components, preserving musicality, timing accuracy, and natural harmonic structure.
• System Enhancement – Harmonix SYN 100 Spikes and RF909x Spike Base improve focus, bass articulation, and soundstage stability when used under loudspeakers, racks, or electronics, especially in revealing high-resolution systems.
• Specifications – Precision-machined metal spikes with matched base interfaces, resonance-tuned materials, point-contact energy transfer, and compatibility with most speaker and rack threaded inserts for universal audiophile applications.
• Dimensions – Individual spike height is approximately 25 mm, with RF909x bases measuring roughly 50 mm in diameter, allowing discreet placement while maintaining effective mechanical coupling.
• Weight – Each spike and base set weighs approximately 150–200 g, providing sufficient mass for stability while supporting controlled resonance behavior and consistent component grounding.
For Prices Login -
Transrotor Strato Turntable (Black Nero) with TR9 Chrom Tonearm/Figaro MC Cartridge and Konstant FMD Power Supply
• Reference Turntable Overview – The Transrotor Strato Turntable (Black Nero) with TR9 Chrom Tonearm/Figaro MC Cartridge and Konstant FMD Power Supply delivers ultra-stable, low-resonance analogue playback through a high-mass chassis and precision-engineered German machining.
• Precision Bearing & Platter System – Its inverted hydrodynamic bearing and multi-layer aluminium platter provide exceptionally low noise, improved speed consistency and enhanced micro-detail retrieval, with one mention of Transrotor Strato Turntable (Black Nero) improving accuracy.
• Tonearm & Cartridge Synergy – The TR9 Chrom tonearm paired with the Figaro MC cartridge ensures superb tracking, natural tonal density and wide staging, offering excellent synergy for high-end vinyl systems, with one further reference to Transrotor Strato Turntable (Black Nero).
• External Konstant FMD Motor Control – The dedicated Konstant FMD power supply delivers precise electronic speed regulation, reduced motor vibration and superior pitch stability, significantly elevating the turntable’s resolution and dynamic range.
• Product Dimensions – Approx. 450 mm (W) × 360 mm (D) × 200 mm (H), requiring a stable, high-mass support surface for optimal isolation and mechanical performance.
• Product Weight – Total system mass is roughly 30–35 kg depending on configuration, providing exceptional resonance control and improving low-frequency articulation and overall sonic authority.
For Prices Login