-
Edge G3 Integrated Amplifier
• Overview – The Edge G3 Integrated Amplifier, released in the early 2000s, is a solid state Class AB integrated amplifier featuring high-current output stages and refined preamplification for authoritative, full-range loudspeaker control.
• Power & Drive – Delivering substantial current capability, Edge G3 Integrated Amplifier provides confident bass authority and stable performance into demanding loads, maintaining composure and dynamic headroom during complex musical passages.
• Build & Circuitry – Built with robust chassis construction and dual-mono inspired layout, the design emphasizes short signal paths and substantial power supply reserves to preserve transparency and channel separation.
• Specifications – Solid state Class AB topology, approximately 100–150 watts per channel into 8 ohms, high-current output stage, multiple line-level inputs, frequency response extending beyond 20 Hz–20 kHz with low distortion.
• Dimensions – Approximate dimensions are 430 mm wide × 150 mm high × 400 mm deep, providing substantial internal transformer space while fitting standard hi-fi racks.
• Weight – Weighing approximately 18–22 kg, the amplifier’s mass reflects its large power transformer and heat-sinking required for sustained high-current operation.
For Prices LoginEdge G3 Integrated Amplifier
For Prices Login -
Apogee Stage Speakers
• Product Overview – The Apogee Stage Speakers, released circa 1990, are full-range planar ribbon loudspeakers designed for high-resolution, low-distortion playback, delivering the open, fast transient response Apogee is renowned for.
• Ribbon Loudspeaker Performance – Featuring true ribbon midrange and tweeter elements, these speakers deliver lightning-fast transients, exceptional clarity, and expansive soundstaging that rewards high-quality amplification and careful system matching.
• Design & Sonic Character – The Apogee Stage Speakers use a dipole radiation pattern with large ribbon surfaces, producing natural tonal balance, deep image layering, and lifelike vocal reproduction unmatched by conventional dynamic driver designs.
• Specifications – Nominal impedance is approximately 3–4 ohms with sensitivity around 86 dB, requiring high-current amplifiers capable of stable low-impedance drive to unlock their full dynamic and tonal potential.
• Dimensions – Each speaker measures approximately 1220 mm (H) × 560 mm (W) × 60 mm (D), with a slim vertical profile that still demands adequate floor space and thoughtful room placement.
• Weight – Each speaker weighs roughly 32 kg, reflecting the substantial ribbon assemblies, rigid frame construction, and damping required for mechanical stability and accurate ribbon driver operation.
For Prices LoginApogee Stage Speakers
For Prices Login -
Norstone Vintage Speaker Stands
• Overview – Norstone Vintage Speaker Stands, released in 2020, are retro-inspired loudspeaker supports combining classic aesthetics with modern rigidity, designed to improve speaker stability, resonance control, and overall sonic clarity.
• Design & Damping – Built using steel columns and solid wooden top plates, the Norstone Vintage Speaker Stands reduce micro-vibrations, enhance midrange focus, and deliver improved bass articulation in compact bookshelf speaker systems.
• System Matching – The Norstone Vintage Speaker Stands are ideal for standmount loudspeakers from brands like JBL, Klipsch, Wharfedale, and other classic-inspired designs, complementing both vintage and modern hi-fi interiors.
• Specifications – Features rigid steel frame construction, high load-bearing capacity suitable for heavy bookshelf speakers, anti-slip top plate surface, and provision for optional isolation feet or spikes for floor coupling.
• Dimensions – Overall dimensions (W x H x D): 380 x 260 x 280 mm, Rising height: 190 mm, max speaker weight is 60kg
For Prices LoginNorstone Vintage Speaker Stands
For Prices Login -
Norstone Epur 4 HiFi Rack
• Product Overview – The Norstone Epur 4 HiFi Rack, released in the late 2010s, is a four-tier equipment rack combining steel uprights and tempered glass shelves to provide stable, vibration-controlled support for hi-fi components.
• Rigid & Clean Construction – Featuring square steel columns and thick tempered glass platforms, the Epur 4 minimizes resonance and mechanical feedback, helping electronics perform with improved clarity, focus, and consistent tonal balance.
• Multi-Component Flexibility – Designed for full systems, the rack offers generous tier spacing for amplifiers, sources, and power supplies, while allowing effective airflow and tidy cable management in compact listening spaces.
• Modern Audiophile Aesthetics – The Norstone Epur 4 HiFi Rack blends minimalist design with functional engineering, making it suitable for contemporary interiors without compromising stability or long-term equipment support.
• Dimensions – Approx. 600 mm (W) × 450 mm (D) × 800 mm (H) overall, with shelf spacing optimized for standard-width hi-fi components and multi-box systems.
• Weight – Around 18 kg assembled, providing sufficient mass for vibration control while remaining practical to position and adjust within home audio environments.
For Prices LoginNorstone Epur 4 HiFi Rack
For Prices Login -
Norstone Bergen 2 Hifi Rack
• Product Overview – The Norstone Bergen 2 Hifi Rack, released in the late 2010s, is a compact modular equipment rack combining steel uprights and tempered glass shelves to support stable, vibration-controlled hi-fi system placement.
• Rigid Structural Design – Built with square steel columns and thick smoked glass shelves, the Bergen 2 Hifi Rack minimizes resonance, improves component stability, and enhances sonic clarity across both analogue and digital audio setups.
• Compact System Integration – Designed for space-conscious environments, the rack offers practical tier spacing, clean cable routing, and sufficient ventilation, making it ideal for integrated amplifiers, streamers, and compact power amplifiers.
• Everyday Audiophile Practicality – The Norstone Bergen 2 Hifi Rack supports moderate component weights while maintaining elegant aesthetics, providing a reliable and visually clean platform for modern living spaces.
• Dimensions – Approx. 600 mm (W) × 450 mm (D) × 400 mm (H) per shelf section, offering compatibility with standard-width hi-fi components and balanced vertical spacing.
• Weight – Roughly 15 kg assembled, delivering adequate mass for vibration control while remaining easy to position or relocate within home audio systems.
For Prices LoginNorstone Bergen 2 Hifi Rack
For Prices Login -
Norstone Stabbl Hifi Rack
• Product Overview – The Norstone Stabbl Hifi Rack, released in the late 2010s, is a modular steel-and-wood equipment rack designed to provide high load capacity, excellent vibration control, and clean aesthetics for high-end audio systems.
• Rigid Modular Construction – Built with solid steel legs and thick bamboo shelves, the Stabbl Hifi Rack minimizes resonance and offers exceptional structural stability, allowing sensitive electronics to perform with improved clarity and dynamic consistency.
• Audiophile-Oriented Design – Each tier is height-adjustable, enabling flexible component placement, proper ventilation, and optimized cable routing while maintaining a mechanically grounded platform for amplifiers, source components, and power supplies.
• System Compatibility – The Norstone Stabbl Hifi Rack supports heavy power amplifiers and multi-box systems, providing reliable isolation and consistent performance benefits across both analogue and digital audio setups.
• Dimensions – Typical shelf dimensions are approximately 590 mm (W) × 490 mm (D), with adjustable height spacing per tier to accommodate large-format hi-fi components and power conditioners.
• Weight – Around 18–20 kg per module depending on configuration, delivering substantial mass for effective vibration damping and long-term mechanical stability.
For Prices LoginNorstone Stabbl Hifi Rack
For Prices Login -
Norstone Stylum 3 Speaker Stand
• Product Overview – The Norstone Stylum 3 Speaker Stand, introduced in the mid-2010s, is a rigid steel loudspeaker stand engineered to improve stability, imaging focus, and bass control for stand-mount speakers.
• Rigid Steel Construction – Built with square-section steel columns and a heavy base plate, the Norstone Stylum 3 Speaker Stand reduces resonance and vibration, allowing speakers to perform with improved clarity, timing, and spatial precision.
• Optimised Speaker Support – The top plate accommodates a wide range of bookshelf speakers, while the mass-loadable central column enables fine tuning of tonal balance and low-frequency authority.
• Practical Audiophile Design – Adjustable floor spikes provide secure coupling on carpeted or solid floors, ensuring consistent speaker positioning and reliable performance in dedicated listening rooms or mixed-use spaces.
• Dimensions – 730 mm height with a top plate around 165 × 220 mm and a wide base for enhanced stability and correct tweeter ear-level alignment.
• Weight – Roughly 7 kg per stand, offering sufficient mass to control resonance while remaining manageable for installation and repositioning.
For Prices LoginNorstone Stylum 3 Speaker Stand
For Prices Login -
Roksan Blak Integrated Amplifier
• Overview – The Roksan Blak Integrated Amplifier, released in 2016, is a powerful Class AB solid-state design featuring an onboard high-performance DAC, delivering dynamic, controlled, and musically engaging playback for modern high-resolution systems.
• High-Current Amplification – The Roksan Blak Integrated Amplifier offers wide bandwidth and strong current delivery, ensuring excellent grip, transient precision, and rhythmic drive with demanding loudspeakers while maintaining smooth tonal balance.
• Versatile Digital Capability – With USB-B, optical, and coaxial digital inputs, the Roksan Blak supports high-resolution PCM playback, enabling system simplification by serving as both amplifier and DAC in one refined chassis.
• Premium Analog Performance – A robust linear power supply, refined preamp stage, and short signal paths provide excellent low noise, transparency, and imaging, ensuring the Roksan Blak Integrated Amplifier performs consistently across varied musical genres.
• Dimensions – Approx. 432 mm (W) × 80 mm (H) × 330 mm (D), offering a substantial but manageable footprint suitable for standard hi-fi racks or shelves.
• Weight – Approx. 14 kg, providing solid mechanical stability that reduces resonance and supports the amplifier’s high-current power architecture.
For Prices LoginRoksan Blak Integrated Amplifier
For Prices Login -
Roksan Caspian M Series-1 CD Player and Integrated Amplifier
• Roksan Caspian M Series-1 CD Player and Integrated Amplifier – The Roksan Caspian M Series-1 CD Player and Integrated Amplifier deliver refined Class AB amplification and precision digital playback, offering exceptional musical flow, timing accuracy and tonal coherence for advanced audiophile systems.
• Digital Architecture & Sonic Performance – Using the Burr-Brown PCM1730E DAC, low-jitter clocking and isolated analogue/digital power rails, the Roksan Caspian M Series-1 CD Player and Integrated Amplifier provide stable imaging, low distortion and natural harmonic structure.
• System Connectivity & Integration – Designed for flexibility, the Roksan Caspian M Series-1 CD Player and Integrated Amplifier offer RCA and XLR outputs, multiple line inputs and digital outputs, ensuring clean signal paths and seamless integration into sophisticated stereo systems.
• Operational Design & Listening Character – With robust linear power supplies and a dual-mono amplifier layout, the Roksan Caspian M Series-1 CD Player and Integrated Amplifier deliver controlled dynamics, articulate bass and an engaging midrange ideal for revealing loudspeakers.
• Product Dimensions – CD Player: 432 mm (W) × 80 mm (H) × 330 mm (D). Integrated Amplifier: 415 mm (W) × 89 mm (H) × 330 mm (D). Sized for standard racks with stable thermal behaviour and mechanical rigidity.
• Weight – CD Player approx. 10 kg; Integrated Amplifier approx. 14 kg. The dense chassis and transformer design improve vibration control, enhancing clarity, bass articulation and overall system transparency.
For Prices Login -
NorStone ESSE HiFi Rack (4 Tier)
• NorStone ESSE HiFi Rack (4 Tier) – A high-quality hi-fi furniture solution built with gloss-black epoxy-lacquered steel and tempered glass shelves, offering clean aesthetics and functional support for serious audio systems.
• Audio-System Ready Construction – The rack’s design separates electronics across four levels, helping improve ventilation and reduce mechanical and electrical interference—ideal for high-fidelity audio setups.
• Dimensions & Shelf Capacity – External size of 570 mm (W) × 860 mm (H) × 400 mm (D) with shelf spacing of 222 mm; upper shelf rated at 20 kg, internal shelves 20 kg each, and bottom shelf 40 kg.
• Load Rating & Stability – Each glass shelf supports substantial weight (bottom shelf up to 40 kg) with a net rack weight ~23.3 kg, providing stable, vibration-resistant support for components.
For Prices LoginNorStone ESSE HiFi Rack (4 Tier)
For Prices Login -
Roksan Oxygene CD Player with Integrated Amplifier
• Roksan Oxygene CD Player with Integrated Amplifier – A finely engineered British system combining a 24-bit/192kHz CD player and Class D amplifier to deliver precise dynamics and musical clarity for discerning audiophiles.
• Class D Amplification Excellence – The amplifier section uses Hypex UcD modules and a linear power supply, offering approx. 90 W into 8 Ω and up to 150 W into 4 Ω, suitable for advanced speaker loads.
• Digital-to-Analog & Source Flexibility – The CD player supports 24-bit/192 kHz conversion, optical/coax outputs and RCA analogue output, while the integrated amp offers aptX Bluetooth, subwoofer output and multiple line inputs.
• Compact Stylish Design – Each unit measures approximately 310 × 310 × 60 mm (W×D×H), allowing sleek placement in premium systems without sacrificing build quality or performance.
• Balanced Build Weight – The CD player weighs around 4 kg and the integrated amplifier around 7 kg, delivering mechanical stability with minimal rack footprint in high-end systems.
• Upgrade-Friendly Architecture – Its modular design and high-quality digital stage make the Roksan Oxygene CD Player with Integrated Amplifier an ideal foundation for system growth or position as a reference all-in-one solution.
For Prices Login