-
Edge G3 Integrated Amplifier
• Overview – The Edge G3 Integrated Amplifier, released in the early 2000s, is a solid state Class AB integrated amplifier featuring high-current output stages and refined preamplification for authoritative, full-range loudspeaker control.
• Power & Drive – Delivering substantial current capability, Edge G3 Integrated Amplifier provides confident bass authority and stable performance into demanding loads, maintaining composure and dynamic headroom during complex musical passages.
• Build & Circuitry – Built with robust chassis construction and dual-mono inspired layout, the design emphasizes short signal paths and substantial power supply reserves to preserve transparency and channel separation.
• Specifications – Solid state Class AB topology, approximately 100–150 watts per channel into 8 ohms, high-current output stage, multiple line-level inputs, frequency response extending beyond 20 Hz–20 kHz with low distortion.
• Dimensions – Approximate dimensions are 430 mm wide × 150 mm high × 400 mm deep, providing substantial internal transformer space while fitting standard hi-fi racks.
• Weight – Weighing approximately 18–22 kg, the amplifier’s mass reflects its large power transformer and heat-sinking required for sustained high-current operation.
For Prices LoginEdge G3 Integrated Amplifier
For Prices Login -
Isotek Sigma Power Conditioner
• Overview – The Isotek Sigma Power Conditioner, released in 2015, is a solid-state mains conditioning component engineered to dramatically reduce electrical noise while maintaining unrestricted current delivery for high-performance audio systems.
• Power Architecture – Built around IsoTek’s advanced delta-filtering topology, the Isotek Sigma Power Conditioner isolates connected components, eliminating differential and common-mode noise while preventing cross-contamination between digital sources and high-current amplifiers.
• Sonic Performance – By lowering the system noise floor, the Isotek Sigma Power Conditioner improves bass articulation, dynamic contrast, image stability, and low-level resolution, especially noticeable in revealing reference-grade analogue and digital systems.
• Specifications – Rated for high-current audio use, featuring multiple individually filtered outlets, star-earthed grounding, internal copper bus bars, RFI/EMI suppression, and surge protection without dynamic compression or current limiting.
• Dimensions – Measures approximately 445 mm (W) × 150 mm (H) × 350 mm (D), designed for standard hi-fi racks while allowing sufficient ventilation and cable clearance for complex multi-component installations.
• Weight – Weighs roughly 15 kg, reflecting substantial internal filtering networks, shielding, and mechanical damping that contribute to stable, resonance-free operation and long-term electrical reliability.
For Prices LoginIsotek Sigma Power Conditioner
For Prices Login -
Isotek Evo3 Power Conditioner
• Product Overview – The Isotek Evo3 Power Conditioner (2016) is a solid-state mains conditioning solution designed to reduce electrical noise, improve current delivery, and enhance overall system clarity in high-resolution hi-fi setups.
• Filtering Topology – Employing IsoTek’s multi-stage delta filter network, the Isotek Evo3 Power Conditioner effectively removes both common-mode and differential-mode noise while preventing cross-contamination between connected audio components.
• Sonic Improvements – Users typically experience lower noise floor, improved micro-detail, tighter bass control, and greater soundstage depth, especially when used with sensitive digital sources and analogue front-end components.
• Specifications – Features high-current audio outlets, internal copper bus bars, star-earthed grounding, RFI/EMI suppression, and surge protection, all engineered to avoid current compression and preserve amplifier dynamics.
• Dimensions – Measures approximately 445 mm wide × 90 mm high × 305 mm deep, sized to integrate easily into standard hi-fi racks or equipment shelves without compromising ventilation or cable management.
• Weight – Weighs roughly 8 kg, reflecting robust internal filtering components, shielding, and mechanical construction designed to ensure stability, durability, and long-term performance consistency.
For Prices LoginIsotek Evo3 Power Conditioner
For Prices Login -
Proac Tablette Signature 10
• Product Overview – The ProAc Tablette Signature 10, released in 2019, is a compact high-end standmount loudspeaker engineered for exceptional midrange purity, refined treble, and precise timing despite its small enclosure.
• Design Philosophy – Featuring a silk-dome tweeter and precision mid-bass driver, the Tablette Signature 10 focuses on phase accuracy and cabinet rigidity, delivering holographic imaging and musical coherence prized by experienced audiophiles.
• Listening Performance – ProAc Tablette Signature 10 excels with vocals, acoustic recordings, and small ensembles, producing articulate bass, natural tonal balance, and surprising scale when paired with high-quality amplification and solid speaker stands.
• Specifications – Nominal impedance is 10 ohms, sensitivity rated at approximately 86 dB, frequency response extends to around 54 Hz–30 kHz, and recommended amplifier power ranges from 20 to 100 watts per channel.
• Dimensions – Compact cabinet measures approximately 305 mm (H) × 190 mm (W) × 160 mm (D), allowing flexible placement while maintaining optimal internal volume for controlled bass and low coloration.
• Weight – Each speaker weighs roughly 5 kg, reflecting dense cabinet construction and internal damping designed to minimise resonance and preserve clarity at higher listening levels.
For Prices LoginProac Tablette Signature 10
For Prices Login -
Proac Response D18 Speakers
• Overview – ProAc Response D18 Speakers, released in 2012, are slim floorstanding loudspeakers designed to deliver full-scale sound, exceptional midrange clarity, and refined dynamics from an elegant, space-efficient enclosure.
• Acoustic Design – Engineered with ProAc’s proven driver integration, they offer a coherent, open soundstage with fast transient response, natural tonal balance, and impressive bass extension relative to their compact floorstanding form factor.
• Listening Performance – ProAc Response D18 Speakers are widely praised for their musicality and neutrality, excelling with vocals and acoustic instruments while remaining dynamic and engaging across rock, jazz, and orchestral recordings.
• Specifications – 2.5-way reflex design, nominal 8-ohm impedance, sensitivity approx. 88.5 dB, twin 6.5-inch mid-bass drivers, silk-dome tweeter, and rear-firing port optimized for controlled low-frequency output.
• Dimensions – Approx. 890 mm (H) × 203 mm (W) × 260 mm (D), offering a slender footprint that integrates easily into domestic listening rooms without sacrificing scale or low-frequency authority.
• Weight – Approximately 21 kg per speaker, reflecting solid cabinet construction and internal bracing designed to minimize resonance and support clean, articulate sound reproduction at higher listening levels.
For Prices LoginProac Response D18 Speakers
For Prices Login -
Proac Response D20
• ProAc Response D20 Loudspeaker Overview – The ProAc Response D20, released in the early 2010s, delivers refined musicality with its silk-dome tweeter and expertly tuned cabinet, offering a naturally expressive and highly engaging listening experience.
• Advanced Tweeter and Midbass Design – Featuring ProAc’s soft-dome tweeter and a meticulously engineered midbass driver, the Response D20 produces smooth highs, rich midrange presence, and impressive low-frequency extension for its compact footprint.
• Natural Tonality and Imaging – The ProAc Response D20 is celebrated for its warm tonal balance, exceptional vocal clarity, and pinpoint imaging, making it ideal for acoustic, jazz, and vocal-centric music lovers.
• Cabinet Craftsmanship – Built with rigid, hand-finished real-wood veneer cabinets, the D20 minimises resonance and enhances transparency, delivering the signature ProAc blend of musicality and detail.
• Dimensions – Approx. 975 mm (H) × 190 mm (W) × 229 mm (D), offering a slim profile that integrates easily into modern listening spaces without compromising acoustic authority.
• Weight – Roughly 22 kg per speaker, providing stability and improved bass performance through cabinet rigidity and internal bracing.
For Prices LoginProac Response D20
For Prices Login -
Proac Tablette II
• ProAc Tablette II Overview – The ProAc Tablette II, released in the early 1990s, is a legendary compact monitor known for its exceptional imaging, natural midrange, and room-friendly performance despite its small sealed-cabinet design.
• Iconic Mini-Monitor Sound – The ProAc Tablette II delivers superb coherence, rich vocal presence, and precise stereo imaging, offering musical refinement that outperforms many larger speakers in accuracy and soundstage clarity.
• Versatile Placement – Designed for nearfield and small-room listening, the ProAc Tablette II performs exceptionally well on high-quality stands, maintaining tonal balance and articulation even when placed close to walls.
• Timeless British Engineering – Handmade to high standards typical of early ProAc designs, the Tablette II combines premium drivers, careful crossover tuning, and classic cabinetry for long-term reliability and natural musicality.
• Dimensions – Approx. 305 mm (H) × 165 mm (W) × 210 mm (D), compact enough for bookshelves, desktop setups, or small dedicated listening spaces.
• Weight – Roughly 4–5 kg per speaker, providing a solid and stable cabinet that enhances clarity and reduces unwanted resonance.
For Prices LoginProac Tablette II
For Prices Login -
Monster Cable M1.5 M-Series Speaker Cables (2.5m)
• Monster Cable M1.5 M-Series Speaker Cables – Designed for high-resolution systems, these reference-grade cables use advanced Time Correct windings to deliver improved transient response, tighter bass, and superior dynamic accuracy.
• High-Performance Conductor Design – Features large-gauge, multi-stranded copper conductors with precision winding geometry that reduces signal smear, enhances imaging stability, and maintains tonal neutrality across demanding loudspeakers.
• Low-Noise Construction – Uses Monster’s Magnetic Flux Tube and MicroFiber dielectric technologies to minimize distortion, preserve detail retrieval, and optimise signal flow for both high-current and low-level musical information.
• System Compatibility – The M1.5 M-Series works exceptionally well with power-hungry amplifiers and full-range speakers, offering improved coherence, cleaner transients, and greater separation in revealing hi-fi setups.
• Dimensions – Typically supplied in custom lengths; cable diameter approx. 18–20 mm depending on termination, ensuring robust shielding and mechanical stability for long-term reliability.
• Weight – Substantial mass due to heavy-gauge conductors and shielding; weight varies by length, contributing to reduced vibration and maintaining consistent electrical performance.
For Prices Login -
ProAc Carbon Pro 8
• ProAc Carbon Pro 8 – This reference floorstanding loudspeaker employs a carbon-fiber cabinet structure, advanced crossover engineering, and high-sensitivity drivers to deliver dynamic, transparent, and effortlessly detailed sound for true high-end systems.
• Carbon-Fiber Composite Cabinet – The ProAc Carbon Pro 8 uses a rigid carbon-fiber and resin shell designed to minimize resonance, improving clarity, transient speed, and low-level detail across the full frequency spectrum.
• High-Resolution Driver System – Featuring ProAc’s ribbon tweeter and custom bass/mid drivers, the Carbon Pro 8 produces expansive imaging, deep bass authority, and exceptional tonal accuracy suitable for both large rooms and demanding listeners.
• Precision Crossover Implementation – Hand-selected components and time-aligned crossover topology ensure seamless driver integration, controlled dispersion, and a natural, coherent soundstage with excellent microdynamic expression.
• Dimensions – Approx. 1200 mm (H) × 270 mm (W) × 430 mm (D). Tall, elegant enclosure designed for optimal acoustic loading and room interaction.
• Weight – Approximately 50–55 kg per speaker, providing exceptional stability and resonance control to support high-output, low-distortion performance.
For Prices LoginProAc Carbon Pro 8
For Prices Login