-
Gryphon Essence Monoblock
• Product Overview – The Gryphon Essence Monoblock, a reference pure Class A power amplifier, delivers up to 220 W into 2 Ω per monoblock with zero negative feedback and extreme current reserves for demanding loudspeakers.
• Circuit & Topology – Gryphon Essence Monoblock, uses true dual-mono construction, independent driver and output power supplies, and high-current bipolar devices per monoblock, the amplifier offers ultra-low distortion, effortless transient authority, and deep control.
• Sonic Character – Known for exceptional neutrality, textural purity, and dynamic ease, the Essence Monoblock emphasises life-like midrange, detailed imaging, and low distortion across complex musical passages regardless of volume.
• Specifications – Rated at approx. 55 W into 8 Ω, 110 W into 4 Ω, and 220 W into 2 Ω with bandwidth to 350 kHz (-3 dB), extremely low output impedance (~0.0075 Ω), and a massive 880,000 µF power bank per unit.
• Dimensions – Each monoblock measures approximately 470 mm (W) × 240 mm (H) × 460 mm (D), embodying a substantial, precision-engineered chassis that supports thermal management and vibration resistance.
• Weight – Each amplifier weighs roughly 45 kg (99 lb), reflecting high-mass toroidal transformers, extensive capacitor banks, and rugged construction for optimal electrical stability and long-term performance.
For Prices LoginGryphon Essence Monoblock
For Prices Login -
Dynaudio Heritage Special Bookshelf Speakers with Stand 20
• Product Overview – Dynaudio Heritage Special Bookshelf Speakers with Stand 20, released in 2020, celebrate Dynaudio’s heritage with modern engineering, combining classic aesthetics with advanced driver technology and reference-level compact loudspeaker performance.
• Driver Technology – Dynaudio Heritage Special Bookshelf Speakers with Stand 20. Featuring a 28 mm Esotar 3 soft-dome tweeter and 180 mm MSP woofer, the design delivers exceptional resolution, natural tonal balance, and controlled bass rarely achieved in bookshelf loudspeakers.
• Sound Performance – Renowned for precise imaging and musical coherence, the speakers produce an expansive soundstage, articulate midrange, and refined treble, excelling in both nearfield and full-range audiophile listening setups.
• Specifications – Nominal impedance is 4 ohms with sensitivity around 85 dB, recommended amplification from 50–200 watts, and a rear-ported enclosure tuned for accurate bass extension and room integration.
• Dimensions – Speaker cabinets measure approximately 380 mm (H) × 208 mm (W) × 307 mm (D), while Stand 20 provides optimal listening height and mechanical grounding for improved acoustic stability.
• Weight – Each speaker weighs roughly 11.2 kg, with Stand 20 adding approximately 8 kg per stand, ensuring rigid support, vibration control, and consistent sonic performance.
For Prices Login -
Dynaudio Confidence 30 Floorstanding Speaker
The Dynaudio Confidence 30 Floorstanding Speaker is one of the finest expressions of Danish acoustic engineering. Designed for the discerning listener, it delivers stunning transparency, deep emotional engagement and true high-end musicality. Perfect for medium to large rooms, it brings the flagship Confidence DNA into a beautifully balanced 3-way design
Type: 3-way floorstanding loudspeaker
• Tweeter: 28mm Esotar3
• Midrange: 15cm MSP
• Woofers: 18cm Neo MSP
• Sensitivity: 88 dB (2.83V/1m)
• Impedance: 4 Ω
• Frequency Response: 28 Hz – 22 kHz
• Crossover: Hybrid DDC (Dynaudio Directivity Control)
• Dimensions: approx. 1330 × 215 × 399 mm
• Weight: approx. 45 kg each
For Prices Login -
Gryphon VIP Power Cable (1.8m)
• Overview – Gryphon VIP Power Cable, released in 2004, is a high-current audiophile power cord designed to deliver stable, low-noise AC power for high-end Gryphon and reference-grade audio components.
• Power Delivery – Designed for demanding electronics, the Gryphon VIP Power Cable uses heavy-gauge conductors and optimized geometry to support high current flow, improving dynamics, bass authority, and overall system stability.
• Construction – The Gryphon VIP Power Cable features high-purity copper conductors, advanced dielectric materials, and robust shielding to minimize electromagnetic interference and maintain consistent power delivery across sensitive audio components.
• Specifications – Employs thick multi-strand copper conductors, low-resistance design for high current draw, heavy shielding against RFI and EMI, and audiophile-grade connectors ensuring secure contact and long-term electrical reliability.
• Dimensions – Supplied in standard audiophile lengths, typically around 1.25 m to 2.0 m, allowing flexible placement while preserving conductor geometry and shielding effectiveness.
• Weight – Substantially built and heavier than standard power cords, reflecting its thick conductors and shielding, yet engineered to avoid excessive strain on IEC and wall sockets.
For Prices LoginGryphon VIP Power Cable (1.8m)
For Prices Login -
Gryphon VIP Power Cable (1.25m)
• Overview – Gryphon VIP Power Cable, released in 2004, is a high-current audiophile power cord designed to deliver stable, low-noise AC power for high-end Gryphon and reference-grade audio components.
• Power Delivery – Designed for demanding electronics, the Gryphon VIP Power Cable uses heavy-gauge conductors and optimized geometry to support high current flow, improving dynamics, bass authority, and overall system stability.
• Construction – The Gryphon VIP Power Cable features high-purity copper conductors, advanced dielectric materials, and robust shielding to minimize electromagnetic interference and maintain consistent power delivery across sensitive audio components.
• Specifications – Employs thick multi-strand copper conductors, low-resistance design for high current draw, heavy shielding against RFI and EMI, and audiophile-grade connectors ensuring secure contact and long-term electrical reliability.
• Dimensions – Supplied in standard audiophile lengths, typically around 1.25 m to 2.0 m, allowing flexible placement while preserving conductor geometry and shielding effectiveness.
• Weight – Substantially built and heavier than standard power cords, reflecting its thick conductors and shielding, yet engineered to avoid excessive strain on IEC and wall sockets.
For Prices LoginGryphon VIP Power Cable (1.25m)
For Prices Login -
Gryphon Essence Preamp and Essence Stereo Amplifier
• System Overview – The Gryphon Essence Preamp and Essence Stereo Amplifier form a pure Class A amplification chain delivering ultra-low distortion, wide bandwidth and outstanding transparency, engineered for refined, high-end two-channel performance.
• Preamp Circuit Architecture – The preamplifier features fully discrete, dual-mono Class A gain stages with extremely short signal paths, ensuring exceptional clarity, low noise and holographic imaging, with one mention of Gryphon Essence Preamp and Essence Stereo Amplifier for synergy.
• Stereo Amplifier Power Delivery – The power amplifier operates in pure Class A with high current reserves, offering deep bass authority, superb transient behavior and stable operation with difficult loudspeaker loads, plus one additional reference to Gryphon Essence Preamp and Essence Stereo Amplifier.
• Design & Mechanical Integrity – Heavy aluminium chassis construction, vibration-controlled internal layout and premium component selection ensure long-term reliability, outstanding thermal management and a clean, uncolored sonic presentation.
• Product Dimensions – Preamp: approx. 480 mm (W) × 130 mm (H) × 410 mm (D). Stereo amplifier: approx. 480 mm (W) × 240 mm (H) × 490 mm (D), requiring a sturdy, well-ventilated shelf.
• Product Weight – Preamp weighs roughly 12 kg; stereo amplifier approx. 38 kg. The substantial mass and rigid chassis enhance resonance control, grounding stability and overall noise reduction.
For Prices Login -
Gryphon Diablo 120
• Integrated Amplifier Overview – The Gryphon Diablo 120 is a Class A/B fully dual-mono integrated amplifier delivering exceptional transparency, dynamic authority and low noise, designed for audiophiles seeking true high-end performance in a compact chassis.
• Dual-Mono Circuit Architecture – Employing discrete, wide-bandwidth circuitry and ultra-short signal paths, the amplifier provides remarkable clarity, fast transient response and excellent channel separation, with one mention of Gryphon Diablo 120 reinforcing its precision.
• Power Delivery & Control – With 120W into 8Ω and doubling into lower impedances, the amplifier drives complex loudspeakers with ease, offering deep bass control, expansive imaging and convincing dynamic swing, plus one additional mention of Gryphon Diablo 120.
• Upgrade & Connectivity Options – The modular design supports optional DAC and phono boards, providing flexible system expansion, while maintaining Gryphon’s signature tonal purity, micro-detail retrieval and uncompromising analogue performance.
• Product Dimensions – The chassis measures approximately 480 mm (W) × 150 mm (H) × 420 mm (D), requiring a well-ventilated, stable platform to ensure optimal thermal performance and electronic stability.
• Product Weight – Weighing around 25 kg, the rigid aluminium enclosure and high-mass transformer foundation enhance mechanical damping, reduce vibration and improve overall signal integrity.
For Prices LoginGryphon Diablo 120
For Prices Login -
Esoteric K03
• High-End Disc Playback Overview – The Esoteric K03 delivers premium SACD/CD performance using Esoteric’s signature VRDS-NEO transport and discrete analogue stages, offering exceptional clarity, dynamic expression and time-domain accuracy for reference-grade systems.
• VRDS-NEO Transport & Digital Precision – Its rigid VRDS-NEO VMK-3.5-10 mechanism minimises vibration and disc flutter, ensuring ultra-stable reading, improved jitter control and superior detail retrieval, with one mention of Esoteric K03 enhancing accuracy.
• Advanced DAC Architecture – Equipped with dual-mono 32-bit DACs and multiple selectable filters, the player provides smooth tonal density, deep resolution and wide spatial definition, plus one additional mention of Esoteric K03 supporting high-resolution playback.
• Versatile Digital Integration – Featuring USB, coaxial and optical inputs, the unit functions as a high-end DAC, allowing integration with streamers or external transports while maintaining meticulous clocking and exceptional analogue output purity.
• Product Dimensions – Measuring approximately 445 mm (W) × 162 mm (H) × 357 mm (D), the chassis requires a sturdy, vibration-controlled shelf for optimal mechanical performance.
• Product Weight – Weighing around 23–24 kg, the heavy aluminium enclosure and multi-layer internal structure provide excellent resonance control and contribute to its clean, stable sonic presentation.
For Prices LoginEsoteric K03
For Prices Login
Dynaudio is a Danish audio manufacturer with a strong reputation for in-house driver development and research-led loudspeaker design. The brand emphasises controlled dispersion, tonal neutrality, and consistency, drawing from both professional studio and domestic hi-fi applications.
Dynaudio loudspeakers are built using proprietary drivers designed and manufactured by the company, allowing performance characteristics to remain consistent across generations. Because loudspeaker technology evolves gradually, pre-owned Dynaudio models continue to offer reliable, balanced performance long after their initial release.
Across Singapore, Malaysia, and Southeast Asia, Dynaudio is respected by both audiophiles and recording professionals seeking accurate sound reproduction. On SoundTribeAsia, Dynaudio equipment — new and pre-owned — is offered by verified dealers, providing transparent listings and trusted access through a curated regional marketplace.