-
LFD NCSE Mk. III Integrated Amplifier
• Overview – The LFD NCSE Mk. III Integrated Amplifier, released in 2015, is a solid-state integrated amplifier featuring pure analogue preamplification and minimalist circuit design, delivering highly musical performance without DAC or digital circuitry.
• Minimalist Circuit Philosophy – Designed by Dr. Richard Bews, the amplifier eliminates unnecessary components and feedback paths, allowing the LFD NCSE Mk. III Integrated Amplifier to achieve exceptional transparency, natural timing, and remarkably low noise.
• Pure Analogue Signal Path – The LFD NCSE Mk. III Integrated Amplifier is known for its short signal path and hand-selected components, producing lifelike midrange texture, dynamic agility, and an organic presentation highly valued by audiophiles.
• Specifications – Solid-state integrated amplifier, approximately 70W per channel into 8 ohms, high-current output stage, wide bandwidth design, line-level inputs only, ultra-short signal path architecture for minimal signal degradation.
• Dimensions – Approximately 445 mm (W) × 115 mm (H) × 300 mm (D), housed in a minimalist aluminium chassis designed to reduce resonance and maintain stable thermal performance.
• Weight – Approximately 10–12 kg, reflecting its substantial internal transformer, carefully selected discrete components, and rigid enclosure construction.
For Prices LoginLFD NCSE Mk. III Integrated Amplifier
For Prices Login -
Carver CM-1090 Integrated Amplifier
• Overview – The Carver CM-1090 Integrated Amplifier, released circa 1986, is a solid state Class AB integrated amplifier delivering high-current output with built-in phono stage and comprehensive tone controls.
• Power & Performance – Rated at 100 watts per channel into 8 ohms, the Carver CM-1090 Integrated Amplifier offers dynamic headroom and strong low-frequency grip, driving a wide range of loudspeakers with confidence.
• Connectivity & Features – Featuring moving magnet phono input, multiple line-level inputs, tape monitoring, pre-out/main-in jumpers, and full tone control adjustments, it supports flexible system integration for vinyl and digital sources.
• Specifications – Solid state Class AB design, 100W per channel into 8Ω, frequency response 20Hz–20kHz ±0.2dB, total harmonic distortion around 0.05%, damping factor above 100, robust linear power supply.
• Dimensions – Approximate dimensions are 483 mm wide × 140 mm high × 380 mm deep, reflecting its classic full-width chassis and substantial internal transformer layout.
• Weight – Weighing approximately 14–16 kg, the amplifier’s mass supports stable heat dissipation and power supply integrity for sustained high-output listening sessions.
For Prices LoginCarver CM-1090 Integrated Amplifier
For Prices Login