-
Carver CM-1090 Integrated Amplifier
• Overview – The Carver CM-1090 Integrated Amplifier, released circa 1986, is a solid state Class AB integrated amplifier delivering high-current output with built-in phono stage and comprehensive tone controls.
• Power & Performance – Rated at 100 watts per channel into 8 ohms, the Carver CM-1090 Integrated Amplifier offers dynamic headroom and strong low-frequency grip, driving a wide range of loudspeakers with confidence.
• Connectivity & Features – Featuring moving magnet phono input, multiple line-level inputs, tape monitoring, pre-out/main-in jumpers, and full tone control adjustments, it supports flexible system integration for vinyl and digital sources.
• Specifications – Solid state Class AB design, 100W per channel into 8Ω, frequency response 20Hz–20kHz ±0.2dB, total harmonic distortion around 0.05%, damping factor above 100, robust linear power supply.
• Dimensions – Approximate dimensions are 483 mm wide × 140 mm high × 380 mm deep, reflecting its classic full-width chassis and substantial internal transformer layout.
• Weight – Weighing approximately 14–16 kg, the amplifier’s mass supports stable heat dissipation and power supply integrity for sustained high-output listening sessions.
For Prices LoginCarver CM-1090 Integrated Amplifier
For Prices Login -
Harmonix XDC-2 Power Cable (1.5m)
• Overview – Harmonix XDC-2 Power Cable, released in the early 2000s, is a Japanese audiophile-grade power cable designed to prioritise tonal naturalness, musical flow, and noise reduction over sheer current delivery.
• Design Philosophy – Developed using Harmonix’s tuning-by-ear approach, the cable focuses on resonance control, material synergy, and vibration damping to achieve a relaxed, organic presentation across analog and digital components.
• Sonic Performance – Harmonix XDC-2 Power Cable is renowned for smooth treble, rich midrange tonality, and coherent timing, making it especially attractive for tube systems and musically voiced solid-state equipment.
• Specifications – High-purity copper conductors, moderate gauge design, carefully selected dielectric materials, effective mechanical damping, and high-quality connectors optimized for stable contact and consistent AC power transfer.
• Dimensions – Commonly supplied in approximately 1.5 m length, featuring a flexible outer jacket that allows easy routing while maintaining consistent electrical and mechanical characteristics.
• Weight – Approximately 0.9 kg per cable, reflecting dense conductor materials and internal damping without excessive stiffness or stress on component IEC sockets.
For Prices LoginHarmonix XDC-2 Power Cable (1.5m)
For Prices Login -
Harmonix SYN 100 Spikes and RF909x Spike Base
• Product Overview – Harmonix SYN 100 Spikes and RF909x Spike Base, released in the mid-2000s, are vibration control accessories designed to optimize mechanical grounding, resonance dissipation, and tonal balance in high-end audio systems.
• Tuning Philosophy – Developed using Harmonix’s tuning-based approach, the combination controls energy flow rather than fully isolating components, preserving musicality, timing accuracy, and natural harmonic structure.
• System Enhancement – Harmonix SYN 100 Spikes and RF909x Spike Base improve focus, bass articulation, and soundstage stability when used under loudspeakers, racks, or electronics, especially in revealing high-resolution systems.
• Specifications – Precision-machined metal spikes with matched base interfaces, resonance-tuned materials, point-contact energy transfer, and compatibility with most speaker and rack threaded inserts for universal audiophile applications.
• Dimensions – Individual spike height is approximately 25 mm, with RF909x bases measuring roughly 50 mm in diameter, allowing discreet placement while maintaining effective mechanical coupling.
• Weight – Each spike and base set weighs approximately 150–200 g, providing sufficient mass for stability while supporting controlled resonance behavior and consistent component grounding.
For Prices Login -
Coda Technologies TM monoblocks (500W/C)
• Coda Technologies TM Monoblocks (500W/C) – High-current Class AB solid-state monoblocks delivering exceptional dynamic authority, low noise, and vast headroom, engineered for full control of the most demanding loudspeakers.
• Massive Power Delivery – Each TM monoblock produces a continuous 500 watts into 8 ohms with effortless scaling into lower impedances, ensuring stability, grip, and uncompromised performance under complex musical passages.
• Ultra-Low Distortion Architecture – Features high-biased Class AB topology, precision-matched output devices, and large power reserves, enabling holographic imaging, superior microdetail retrieval, and highly accurate transient reproduction.
• Reference-Grade Engineering – Built with robust transformers, premium capacitors, and oversized heatsinks, the TM monoblocks maintain thermal stability and long-term reliability consistent with Coda’s professional design heritage.
• Dimensions – Each monoblock measures approximately 432 mm (W) × 191 mm (H) × 460 mm (D), sized for proper rack integration while allowing optimal ventilation.
• Weight – Each amplifier weighs about 36–40 kg, with transformer mass and heavy chassis construction contributing to vibration control and electrical stability.
For Prices LoginCoda Technologies TM monoblocks (500W/C)
For Prices Login