-
Carver CM-1090 Integrated Amplifier
• Overview – The Carver CM-1090 Integrated Amplifier, released circa 1986, is a solid state Class AB integrated amplifier delivering high-current output with built-in phono stage and comprehensive tone controls.
• Power & Performance – Rated at 100 watts per channel into 8 ohms, the Carver CM-1090 Integrated Amplifier offers dynamic headroom and strong low-frequency grip, driving a wide range of loudspeakers with confidence.
• Connectivity & Features – Featuring moving magnet phono input, multiple line-level inputs, tape monitoring, pre-out/main-in jumpers, and full tone control adjustments, it supports flexible system integration for vinyl and digital sources.
• Specifications – Solid state Class AB design, 100W per channel into 8Ω, frequency response 20Hz–20kHz ±0.2dB, total harmonic distortion around 0.05%, damping factor above 100, robust linear power supply.
• Dimensions – Approximate dimensions are 483 mm wide × 140 mm high × 380 mm deep, reflecting its classic full-width chassis and substantial internal transformer layout.
• Weight – Weighing approximately 14–16 kg, the amplifier’s mass supports stable heat dissipation and power supply integrity for sustained high-output listening sessions.
For Prices LoginCarver CM-1090 Integrated Amplifier
For Prices Login -
Edge G3 Integrated Amplifier
• Overview – The Edge G3 Integrated Amplifier, released in the early 2000s, is a solid state Class AB integrated amplifier featuring high-current output stages and refined preamplification for authoritative, full-range loudspeaker control.
• Power & Drive – Delivering substantial current capability, Edge G3 Integrated Amplifier provides confident bass authority and stable performance into demanding loads, maintaining composure and dynamic headroom during complex musical passages.
• Build & Circuitry – Built with robust chassis construction and dual-mono inspired layout, the design emphasizes short signal paths and substantial power supply reserves to preserve transparency and channel separation.
• Specifications – Solid state Class AB topology, approximately 100–150 watts per channel into 8 ohms, high-current output stage, multiple line-level inputs, frequency response extending beyond 20 Hz–20 kHz with low distortion.
• Dimensions – Approximate dimensions are 430 mm wide × 150 mm high × 400 mm deep, providing substantial internal transformer space while fitting standard hi-fi racks.
• Weight – Weighing approximately 18–22 kg, the amplifier’s mass reflects its large power transformer and heat-sinking required for sustained high-current operation.
For Prices LoginEdge G3 Integrated Amplifier
For Prices Login -
ATC SCM100PSL with Sound Anchor Stands
• Premium System Overview – The ATC SCM100PSL with Sound Anchor Stands, introduced in the mid-2010s, offers a reference-grade passive loudspeaker system known for remarkable neutrality, wide dynamics, and studio-level accuracy suited for mastering-quality listening.
• Advanced Driver Engineering – Featuring ATC’s renowned 3” soft-dome midrange, precision-built woofer, and silk-dome tweeter, the system maintains exceptional linearity and low distortion, with the ATC SCM100PSL providing consistent performance across all listening levels.
• Enhanced Stability & Imaging – The Sound Anchor Stands significantly improve the ATC SCM100PSL system by providing rigid support, reduced floor-borne vibration, and enhanced stereo imaging, creating a more stable and coherent soundstage.
• High-Capacity Cabinet Design – The sealed-box construction delivers tight, accurate bass response and controlled low-frequency behavior, enabling the ATC SCM100PSL with Sound Anchor Stands to excel in both large listening rooms and professional environments.
• Dimensions – Speakers: approx. 980 mm (H) × 445 mm (W) × 535 mm (D). Sound Anchor Stands: approx. 355 mm (H). Combined height provides optimal driver alignment for seated listening.
• Weight – Speakers: approx. 49 kg each. Sound Anchor Stands: approx. 18–20 kg each. Total system mass improves stability, resonance control, and low-frequency accuracy.
For Prices LoginATC SCM100PSL with Sound Anchor Stands
For Prices Login -
ATC SCM20SL
• Overview – ATC SCM20SL is a passive sealed-box two-way studio loudspeaker, engineered for absolute accuracy, low coloration, and linear phase response favored by professionals.
• Sound Character – Renowned for exceptional midrange neutrality, fast transient response, and tight acoustic-suspension bass, the ATC SCM20SL excels in nearfield or compact room audiophile listening environments.
• Driver Technology – ATC SCM20SL features ATC’s legendary 150mm Super Linear mid-bass driver and 25mm soft-dome tweeter, delivering low distortion, high dynamic headroom, and reference-grade vocal realism.
• Specifications – Nominal impedance 8 ohms, sensitivity approximately 85dB/W/m, recommended amplifier power 75–300W, sealed enclosure design ensuring controlled bass and consistent performance across varied room placements.
• Dimensions – Cabinet measures approximately 446 mm (H) × 238 mm (W) × 375 mm (D), offering a compact yet substantial monitor footprint suitable for stand-mount or studio console installations.
• Weight – Each loudspeaker weighs approximately 24 kg, reflecting dense cabinet construction and heavy internal bracing designed to minimize resonance and maximize midband clarity.
For Prices LoginATC SCM20SL
For Prices Login -
Harmonix XDC-2 Power Cable (1.5m)
• Overview – Harmonix XDC-2 Power Cable, released in the early 2000s, is a Japanese audiophile-grade power cable designed to prioritise tonal naturalness, musical flow, and noise reduction over sheer current delivery.
• Design Philosophy – Developed using Harmonix’s tuning-by-ear approach, the cable focuses on resonance control, material synergy, and vibration damping to achieve a relaxed, organic presentation across analog and digital components.
• Sonic Performance – Harmonix XDC-2 Power Cable is renowned for smooth treble, rich midrange tonality, and coherent timing, making it especially attractive for tube systems and musically voiced solid-state equipment.
• Specifications – High-purity copper conductors, moderate gauge design, carefully selected dielectric materials, effective mechanical damping, and high-quality connectors optimized for stable contact and consistent AC power transfer.
• Dimensions – Commonly supplied in approximately 1.5 m length, featuring a flexible outer jacket that allows easy routing while maintaining consistent electrical and mechanical characteristics.
• Weight – Approximately 0.9 kg per cable, reflecting dense conductor materials and internal damping without excessive stiffness or stress on component IEC sockets.
For Prices LoginHarmonix XDC-2 Power Cable (1.5m)
For Prices Login -
Harmonix SYN 100 Spikes and RF909x Spike Base
• Product Overview – Harmonix SYN 100 Spikes and RF909x Spike Base, released in the mid-2000s, are vibration control accessories designed to optimize mechanical grounding, resonance dissipation, and tonal balance in high-end audio systems.
• Tuning Philosophy – Developed using Harmonix’s tuning-based approach, the combination controls energy flow rather than fully isolating components, preserving musicality, timing accuracy, and natural harmonic structure.
• System Enhancement – Harmonix SYN 100 Spikes and RF909x Spike Base improve focus, bass articulation, and soundstage stability when used under loudspeakers, racks, or electronics, especially in revealing high-resolution systems.
• Specifications – Precision-machined metal spikes with matched base interfaces, resonance-tuned materials, point-contact energy transfer, and compatibility with most speaker and rack threaded inserts for universal audiophile applications.
• Dimensions – Individual spike height is approximately 25 mm, with RF909x bases measuring roughly 50 mm in diameter, allowing discreet placement while maintaining effective mechanical coupling.
• Weight – Each spike and base set weighs approximately 150–200 g, providing sufficient mass for stability while supporting controlled resonance behavior and consistent component grounding.
For Prices Login -
Adcom GFP-555 Preamp and GFA-5800 Power Amp
• Classic Adcom System – The Adcom GFP-555 Preamp and GFA-5800 Power Amp, introduced in the early 1990s, deliver robust solid-state performance with high-current Class AB amplification, offering strong dynamics and clean, authoritative control.
• High-Resolution Preamp Design – The GFP-555 features low-noise circuitry, precise tone controls, a high-quality phono stage, and multiple inputs, giving the Adcom GFP-555 Preamp and GFA-5800 Power Amp excellent system flexibility.
• Powerful Amplification – The GFA-5800, designed by Nelson Pass, provides 250W per channel into 8 ohms with massive current reserves. This ensures the Adcom GFP-555 Preamp and GFA-5800 Power Amp can drive difficult speakers with ease.
• Musical, Neutral Presentation – The pairing delivers fast transient response, wide soundstage, and neutral tonal balance, making it a sought-after vintage combo for both audiophiles and collectors seeking reliable performance.
• Dimensions – Preamp: approx. 432 × 89 × 330 mm. Power amp: approx. 432 × 203 × 483 mm. Designed to fit standard audio racks with deep shelves.
• Weight – Preamp weighs about 7 kg; power amp around 28–30 kg, thanks to its heavy transformer and large heat sinks for stable high-current operation.
For Prices LoginAdcom GFP-555 Preamp and GFA-5800 Power Amp
For Prices Login -
Adcom GFP-345 Pre-Amp and GFA-535 mk2 Amplifier
• Adcom GFP-345 Pre-Amp and GFA-535 Mk2 Amplifier – A classic solid-state pairing featuring a fully Class AB power stage, offering clean, authoritative drive and exceptional value for enthusiasts seeking transparent, reliable high-fidelity performance.
• Refined Preamp Control – The GFP-345 provides precise volume management, clean signal routing, high-quality phono stage support, and low-noise circuitry, enabling a neutral presentation with impressive musical clarity across varied source components.
• Dynamic Class AB Power – The GFA-535 Mk2 delivers approximately 60W per channel into 8 ohms with robust current delivery, maintaining excellent channel separation, punchy dynamics, and stable operation even with moderately difficult loudspeaker loads.
• Synergistic System Performance – Together, the GFP-345 and GFA-535 Mk2 create a cohesive soundstage with firm bass control, open midrange, and smooth treble, making this combo a proven choice for budget-conscious yet discerning listeners.
• Dimensions – GFP-345: approx. 432 mm (W) × 76 mm (H) × 330 mm (D). GFA-535 Mk2: approx. 432 mm (W) × 140 mm (H) × 330 mm (D). Fits standard racks comfortably.
• Weight – GFP-345 weighs around 5–6 kg, while GFA-535 Mk2 weighs roughly 10–11 kg, with a solid transformer and steel chassis enhancing durability and vibration resistance.
For Prices Login -
ATC SCM11 V2
• Two-Way Monitor Overview – The ATC SCM11 V2 is a sealed-box two-way loudspeaker offering exceptional midrange clarity, wide dispersion and superb neutrality, designed for audiophiles who prioritise accuracy, timing and musical honesty.
• Soft-Dome Midrange/Tweeter Precision – Using ATC’s renowned SH25-76 soft-dome tweeter and hand-built mid/bass driver, the speaker delivers smooth treble, articulate mids and outstanding low-distortion performance, with one mention of ATC SCM11 V2 enhancing resolution.
• Sealed Enclosure Accuracy – The non-ported design provides tight, controlled bass and superior time-domain behaviour, enabling exceptional integration in small to medium rooms, plus one additional mention of ATC SCM11 V2 reinforcing consistency.
• Crossover & Engineering Purity – Its high-spec crossover network, short signal path and robust internal bracing maintain tonal accuracy, stable imaging and dynamic integrity even at elevated listening levels.
• Product Dimensions – Each cabinet measures approximately 381 mm (H) × 232 mm (W) × 267 mm (D), offering a compact profile ideal for stand-mount setups in refined listening spaces.
• Product Weight – Weighing around 10.9 kg per speaker, the rigid, heavily damped cabinet construction enhances mechanical stability and reduces resonance for maximum sonic transparency.
For Prices LoginATC SCM11 V2
For Prices Login
Adcom is an American audio electronics brand known for delivering high-current amplification and robust engineering at accessible price points. Rising to prominence through its power amplifiers and preamplifiers, Adcom focused on reliability, drive capability, and straightforward circuit design.
Adcom amplifiers are built with conservative engineering margins and substantial power supplies, allowing many models to remain in active use decades after release. This makes pre-owned Adcom equipment especially attractive to listeners seeking dependable amplification with lasting performance.
Across Singapore, Malaysia, and Southeast Asia, Adcom continues to appeal to value-conscious audiophiles building reliable systems. On SoundTribeAsia, Adcom equipment — new and pre-owned — is offered by verified dealers, providing transparent listings and trusted access through a regional marketplace.