-
Gryphon Essence Preamp and Essence Stereo Amplifier
• System Overview – The Gryphon Essence Preamp and Essence Stereo Amplifier form a pure Class A amplification chain delivering ultra-low distortion, wide bandwidth and outstanding transparency, engineered for refined, high-end two-channel performance.
• Preamp Circuit Architecture – The preamplifier features fully discrete, dual-mono Class A gain stages with extremely short signal paths, ensuring exceptional clarity, low noise and holographic imaging, with one mention of Gryphon Essence Preamp and Essence Stereo Amplifier for synergy.
• Stereo Amplifier Power Delivery – The power amplifier operates in pure Class A with high current reserves, offering deep bass authority, superb transient behavior and stable operation with difficult loudspeaker loads, plus one additional reference to Gryphon Essence Preamp and Essence Stereo Amplifier.
• Design & Mechanical Integrity – Heavy aluminium chassis construction, vibration-controlled internal layout and premium component selection ensure long-term reliability, outstanding thermal management and a clean, uncolored sonic presentation.
• Product Dimensions – Preamp: approx. 480 mm (W) × 130 mm (H) × 410 mm (D). Stereo amplifier: approx. 480 mm (W) × 240 mm (H) × 490 mm (D), requiring a sturdy, well-ventilated shelf.
• Product Weight – Preamp weighs roughly 12 kg; stereo amplifier approx. 38 kg. The substantial mass and rigid chassis enhance resonance control, grounding stability and overall noise reduction.
For Prices Login -
FM Acoustics 245 Pre Amp and F10B Power Amp
• Overview – FM Acoustics 245 Pre Amp and F10B Power Amp, released circa 1995, form a reference-grade solid-state amplification system focused on extreme linearity, ultra-low noise, and uncompromising signal purity.
• Preamplifier Design – The FM Acoustics 245 preamplifier is engineered for absolute transparency, offering exceptional channel separation, precision volume control, and vanishingly low distortion for the most revealing analog and digital sources.
• Power Amplification – Designed for stability and control, the pairing delivers effortless dynamics, tight bass authority, and a neutral tonal balance, allowing loudspeakers to perform without coloration or compression at any listening level.
• Specifications – F10B delivers approximately 250 watts per channel into 8 ohms, doubling into lower impedances, with extremely low THD, wide bandwidth, high damping factor, and fully discrete, DC-coupled circuit topology.
• Dimensions – FM Acoustics 245 Pre Amp and F10B Power Amp: Preamp approx. 445 mm (W) × 140 mm (H) × 430 mm (D); power amplifier approx. 445 mm (W) × 260 mm (H) × 520 mm (D), designed for professional-grade rack integration.
• Weight – Preamp approximately 20 kg; power amplifier approximately 75 kg, reflecting massive power supplies, extensive shielding, and precision-machined chassis construction essential to FM Acoustics’ reference performance standards.
For Prices LoginFM Acoustics 245 Pre Amp and F10B Power Amp
For Prices Login -
Mark Levinson No.53 Reference Monoblock
• Product Overview – Mark Levinson No.53 Reference Monoblock, released in 2009, is a solid-state Class D reference amplifier using proprietary PWM switching architecture, delivering extreme power, efficiency, and absolute control over demanding loudspeakers.
• Reference Engineering – Designed as a no-compromise statement, the amplifier employs separate digital control, analog audio, and power sections, ensuring ultra-low noise, massive current delivery, and exceptional stability under real-world loads.
• Sound Performance – Renowned for its effortless dynamics, expansive soundstage, and iron-fisted bass control, the Mark Levinson No.53 Reference Monoblock combines transparency with authority rarely achieved in high-power amplification.
• Specifications – Rated at 500 W into 8 ohms, 1000 W into 4 ohms, with stable operation into 2 ohms, ultra-wide bandwidth, low distortion, and advanced thermal and protection monitoring systems.
• Dimensions – Each chassis measures approximately 483 mm (W) × 241 mm (H) × 610 mm (D), featuring substantial heatsinking and an industrial-grade enclosure engineered for long-term reference operation.
• Weight – Each monoblock weighs approximately 61 kg, reflecting its massive power supply, high-density construction, and mechanical rigidity essential for vibration control and electrical stability.
For Prices LoginMark Levinson No.53 Reference Monoblock
For Prices Login -
Kondo Melius Power Amplifier
Specifications
• Type: Vacuum Tube Power Amplifier
• Output Power: 50W per channel (Class A, push-pull)
• Tubes: 4 × 6550 / KT88, 2 × 12AU7, 2 × 12AX7
• Frequency Response: 10Hz – 100kHz (±1dB)
• Input Impedance: 100kΩ
• Output Impedance: 4Ω / 8Ω
• Dimensions: 460 × 280 × 390 mm
• Weight: 35 kg
• Made in Japan
For Prices LoginKondo Melius Power Amplifier
For Prices Login -
Gryphon Essence Monoblock
• Product Overview – The Gryphon Essence Monoblock, a reference pure Class A power amplifier, delivers up to 220 W into 2 Ω per monoblock with zero negative feedback and extreme current reserves for demanding loudspeakers.
• Circuit & Topology – Gryphon Essence Monoblock, uses true dual-mono construction, independent driver and output power supplies, and high-current bipolar devices per monoblock, the amplifier offers ultra-low distortion, effortless transient authority, and deep control.
• Sonic Character – Known for exceptional neutrality, textural purity, and dynamic ease, the Essence Monoblock emphasises life-like midrange, detailed imaging, and low distortion across complex musical passages regardless of volume.
• Specifications – Rated at approx. 55 W into 8 Ω, 110 W into 4 Ω, and 220 W into 2 Ω with bandwidth to 350 kHz (-3 dB), extremely low output impedance (~0.0075 Ω), and a massive 880,000 µF power bank per unit.
• Dimensions – Each monoblock measures approximately 470 mm (W) × 240 mm (H) × 460 mm (D), embodying a substantial, precision-engineered chassis that supports thermal management and vibration resistance.
• Weight – Each amplifier weighs roughly 45 kg (99 lb), reflecting high-mass toroidal transformers, extensive capacitor banks, and rugged construction for optimal electrical stability and long-term performance.
For Prices LoginGryphon Essence Monoblock
For Prices Login -
Pass Labs XS Phono with Power Supply
-
Pass Labs XS Phono with Power Supply – This flagship dual-chassis phono preamplifier from Pass Laboratories raises the vinyl benchmark, enabling ultra-low-noise amplification of MC/MM cartridges with absolute authority and tonal purity.
-
Reference-Grade Audio Architecture – Featuring selectable gain settings (56, 66, 76 dB), RIAA accuracy ±0.1 dB from 20 Hz to 20 kHz, and a purpose-built power supply dedicated to quiet signal handling.
-
System Integration & Specification – Dual-chassis design: each unit measures approximately 19″ W × 14″ D × 6.25″ H (483 × 356 × 159 mm) and consumes around 55 W of power—ideal for serious turn-table setups.
-
Build Quality & Weight Profile – Weighing roughly 80 lbs (≈ 36 kg total), the unit’s heavy, stable construction minimizes mechanical and electrical interference for fine-detail retrieval and low-level resolution.
For Prices LoginPass Labs XS Phono with Power Supply
For Prices Login -
-
Aavik I-880 Integrated Amplifier
• Overview – Aavik I-880 Integrated Amplifier, released in 2021, is a high-power solid-state Class D integrated amplifier featuring advanced DAC and phono capabilities, engineered for extreme resolution and low-noise performance.
• Sound Performance – Designed for absolute transparency, the amplifier delivers explosive dynamics, ultra-low noise floor, and exceptional control, presenting music with speed, scale, and natural tonal balance across complex passages.
• Design Philosophy – Built using Aavik’s resonance-control technologies and minimalist signal paths, the Aavik I-880 Integrated Amplifier emphasizes mechanical grounding and vibration reduction to preserve microdetail and spatial accuracy.
• Specifications – Rated at approximately 300 watts per channel into 8 ohms and 600 watts into 4 ohms, offering extremely high damping factor, wide bandwidth, and stable operation with demanding loudspeaker loads.
• Dimensions – Chassis measures approximately 442 mm (W) × 147 mm (H) × 460 mm (D), providing a substantial yet refined footprint suitable for high-end audio racks.
• Weight – The amplifier weighs approximately 42 kg, reflecting its massive power supply, resonance-controlled enclosure, and premium internal construction for thermal stability and sonic consistency.
For Prices LoginAavik I-880 Integrated Amplifier
For Prices Login
Pre-Owned HiFi
