-
TAD Evolution One TX
• Product Overview – The TAD Evolution One TX (2016) is a high-end floorstanding loudspeaker engineered in Japan, combining studio-grade accuracy with refined musicality for reference-level two-channel listening environments.
• Driver Technology – Utilizing TAD’s Coherent Source Transducer with beryllium tweeter and midrange diaphragm, the TAD Evolution One TX delivers exceptional phase coherence, pinpoint imaging, and ultra-low distortion across the audible spectrum.
• Cabinet & Voicing – A rigid, low-resonance enclosure with curved side panels minimizes standing waves, allowing the speaker to produce deep, controlled bass while preserving tonal neutrality and dynamic realism at high playback levels.
• Specifications – Nominal impedance 4 ohms, sensitivity approximately 90 dB, frequency response around 28 Hz–60 kHz, recommended amplifier power 50–300 W, optimized for high-current solid-state or quality tube amplification.
• Dimensions – Each speaker measures approximately 400 mm wide × 1,154 mm high × 530 mm deep, designed as a full-scale reference floorstander suitable for medium to large dedicated listening rooms.
• Weight – Each unit weighs roughly 95 kg, reflecting extensive internal bracing and premium materials that contribute to mechanical stability, resonance control, and consistent acoustic performance.
For Prices LoginTAD Evolution One TX
For Prices Login -
TAD Compact Reference CR1
• Overview – TAD Compact Reference CR1, released in 2011, is a high-end standmount loudspeaker engineered to deliver reference-level neutrality, precision imaging, and studio-grade accuracy derived from TAD’s professional monitor heritage.
• Driver Technology – Featuring TAD’s proprietary concentric CST driver with beryllium tweeter and magnesium midrange, it achieves point-source coherence, exceptional phase alignment, and ultra-low distortion across the audible frequency range.
• Sonic Performance – TAD Compact Reference CR1 is celebrated for its transparency, holographic soundstage, and tonal realism, excelling with acoustic, orchestral, and complex recordings where timing and micro-detail are critical.
• Specifications – Two-way bass-reflex design, nominal 4-ohm impedance, sensitivity approx. 87 dB, frequency response roughly 45 Hz–100 kHz, rear-firing port, and high-quality crossover components optimized for minimal signal loss.
• Dimensions – Approx. 410 mm (H) × 250 mm (W) × 360 mm (D), offering a substantial standmount form factor designed for rigid placement on dedicated speaker stands in reference listening environments.
• Weight – Approximately 18 kg per speaker, reflecting dense cabinet construction, internal bracing, and premium driver assemblies required for resonance control and uncompromised acoustic performance.
For Prices LoginTAD Compact Reference CR1
For Prices Login -
Revel Ultima Salon 2
• Product Overview – Revel Ultima Salon 2, released in 2008, is a flagship four-way floorstanding loudspeaker engineered for absolute neutrality, extreme dynamic range, and reference-level accuracy in high-end listening environments.
• Acoustic Design – Advanced waveguide geometry, titanium tweeter, ceramic composite midrange, and multiple aluminum-cone woofers deliver seamless integration, wide dispersion, and exceptionally low distortion across the entire frequency spectrum.
• Sonic Performance – Revel Ultima Salon 2 offers deep controlled bass, holographic imaging, and tonal realism, excelling with complex orchestral passages while preserving micro-detail and transient precision at all listening levels.
• Specifications – Four-way design with dual 8-inch woofers, one 8-inch mid-bass, 4-inch midrange, and 1-inch tweeter; sensitivity approximately 86 dB, nominal impedance 6 ohms.
• Dimensions – Each speaker measures approximately 1190 mm (H) × 350 mm (W) × 460 mm (D), providing substantial cabinet volume for extended bass response and optimized driver loading.
• Weight – Each Revel Ultima Salon 2 loudspeaker weighs approximately 77 kg, reflecting massive internal bracing, thick cabinetry, and vibration-controlled construction for uncompromised acoustic performance.
For Prices LoginRevel Ultima Salon 2
For Prices Login -
Aracraft Tedius AL100ND
• Product Overview – Aracraft Tedius AL100ND, released in the early 2000s, is a solid-state Class AB integrated amplifier emphasizing high-current delivery and minimalist line-level preamplification without DAC or phono stages.
• Amplifier Topology – Built around a high-bias Class AB output stage and robust linear power supply, the design prioritizes stability, low distortion, and consistent control across varying loudspeaker loads.
• Sonic Character – Aracraft Tedius AL100ND is known for its neutral tonal balance, excellent midrange clarity, and tight bass articulation, appealing to listeners who value transparency and precise timing.
• Specifications – Rated around 100 watts per channel into 8 ohms, with high damping factor, wide bandwidth, and low total harmonic distortion for accurate reproduction across complex musical passages.
• Dimensions – Approx. 430 mm (W) × 150 mm (H) × 400 mm (D), using a rigid chassis and internal layout designed to minimize vibration and electromagnetic interference.
• Weight – Approximately 18–20 kg, reflecting a substantial power transformer, large reservoir capacitors, and solid mechanical construction for long-term electrical and thermal stability.
For Prices LoginAracraft Tedius AL100ND
For Prices Login -
Revel Performa F32
• Revel Performa F32 Engineering – The Revel Performa F32 is a three-way floorstander using advanced waveguides and low-distortion drivers to deliver neutral, accurate, and dynamically expressive sound suitable for demanding audiophile systems.
• Refined Driver Architecture – Featuring dual 6.5-inch woofers, a dedicated midrange unit, and an aluminum-dome tweeter, the F32 achieves outstanding clarity, wide bandwidth, and low compression even at higher listening levels.
• Exceptional Tonal Accuracy – Designed through extensive double-blind evaluation, the Performa F32 produces a remarkably linear response with smooth off-axis behaviour, ensuring consistent performance across diverse room acoustics.
• Dynamic and Controlled Bass – The F32 delivers tight, extended bass through optimized port tuning and rigid cabinet design, offering authoritative low-frequency presence without sacrificing speed or control.
• Dimensions – Approx. 1,100 mm (H) × 267 mm (W) × 330 mm (D), providing a slim profile that fits comfortably into modern listening spaces while maintaining strong acoustic performance.
• Weight – Each speaker weighs about 33 kg, supporting reduced vibration, improved driver stability, and enhanced resolution across the frequency spectrum.
For Prices LoginRevel Performa F32
For Prices Login -
Yamaha NS-1000M
• Overview – The Yamaha NS-1000M, introduced in 1974, is a legendary studio monitor famed for its beryllium dome midrange and tweeter, delivering exceptional transparency, transient accuracy, and reference-level neutrality for critical listening.
• Beryllium Drivers – Featuring Yamaha’s iconic 3 cm beryllium tweeter and 8.8 cm beryllium midrange, the NS-1000M provides ultra-fast response, superb micro-detail, and minimal coloration—qualities that made it a worldwide studio standard.
• Controlled Bass Performance – Equipped with a 30 cm woofer in a rigid sealed enclosure, the NS-1000M achieves tight, articulate bass with excellent timing, ideal for both analytical and musical listening environments.
• Precision Monitor Heritage – The Yamaha NS-1000M remains sought after for its highly accurate soundstage, exceptional build quality, and ability to reveal upstream component changes with absolute clarity and honesty.
• Dimensions – Each speaker measures approximately 395 mm (W) × 675 mm (H) × 326 mm (D), offering a substantial enclosure optimized for neutrality and controlled resonance.
• Weight – Each cabinet weighs around 31 kg, contributing to its stable acoustic behavior and resistance to unwanted vibrations in demanding monitoring setups.
For Prices LoginYamaha NS-1000M
For Prices Login -
Yamaha A-S501
• Integrated Amplifier Overview – The Yamaha A-S501 is a Class AB integrated amplifier delivering clean, dynamic power with natural tonal balance and excellent control, offering a highly musical foundation for mid- to upper-level stereo systems.
• Amplification & Circuit Design – Featuring a discrete Class AB topology, ToP-ART chassis layout and high-quality audio-grade components, the Yamaha A-S501 provides low distortion, strong transient response and smooth, detailed presentation across all genres.
• Connectivity & System Integration – With optical, coaxial, multiple analogue inputs, phono stage and subwoofer output, the Yamaha A-S501 supports wide system compatibility, enabling flexible integration with turntables, streamers and digital transports.
• Performance & Listening Characteristics – Delivering 85W per channel into 8 ohms, the Yamaha A-S501 offers tight bass, articulate mids and crisp highs, maintaining clarity and rhythm even with demanding loudspeaker loads.
• Product Dimensions – The Yamaha A-S501 measures 435 mm (W) × 151 mm (H) × 387 mm (D), providing a substantial chassis engineered for stability, efficient heat management and vibration resistance.
• Product Weight – Weighing approximately 10.3 kg, the Yamaha A-S501 benefits from a solid power supply and rigid internal bracing, enhancing mechanical grounding and improving overall sonic performance.
For Prices LoginYamaha A-S501
For Prices Login