-
Tannoy Yorkminster SE Prestige
Tannoy Yorkminster SE Prestige
Enclosure Type: 2-way twin rear-ported
• Recommended Amplifier: 50 – 225W
• Power Handling: 150W
• Frequency Response: 23Hz – 22kHz
• Crossover Frequency: 1.1kHz
• Crossover Type: Bi-wired, hand-wired passive, time-compensated 2nd order LF & HF
• Sensitivity: 95dB
• Impedance: 8 Ohms
• Internal Volume: 200 Litres
• HF: 51mm (2”) aluminium alloy dome, Alnico magnet, Pepperpot Waveguide™
• LF: 300mm (12”) treated paper pulp cone, HE twin-roll fabric surround, 52mm (2”) voice coil
• Adjustments: ±3dB over 1kHz to 22kHz, +2dB to –6dB per octave (5kHz – 22kHz slope)
• Dimensions (W x H x D): 620 × 1080 × 447 mm
• Weight: 61.5kg each
For Prices LoginTannoy Yorkminster SE Prestige
For Prices Login -
Tannoy TD10
• Classic Dual Concentric Design – Tannoy TD10, released in the mid-1990s, features the renowned Dual Concentric driver, delivering point-source coherence, precise imaging, and natural tonal balance prized by experienced audiophiles.
• Coherent Soundstage Performance – The Tannoy TD10 excels in phase accuracy and timing, producing a holographic stereo image with stable center focus, realistic scale, and effortless musical flow across diverse listening genres.
• High Sensitivity Efficiency – Designed for compatibility with both tube and solid-state amplification, this loudspeaker offers high sensitivity and controlled impedance, allowing dynamic expression even with moderate-powered amplifiers.
• Specifications – Nominal impedance is 8 ohms with sensitivity around 92 dB, using a 10-inch Dual Concentric driver, wide frequency response, and front-ported cabinet for controlled low-frequency extension.
• Dimensions – Approx. 1,000 mm (H) × 360 mm (W) × 340 mm (D), providing a substantial cabinet volume optimized for bass authority while remaining suitable for medium to large listening rooms.
• Weight – Each speaker weighs approximately 32–35 kg, reflecting robust cabinet construction designed to minimize resonance and support stable, vibration-free driver performance.
For Prices LoginTannoy TD10
For Prices Login -
Siltech Ruby Mountain 2 Power Cable (1.5m)
• Overview – Siltech Ruby Mountain 2 Power Cable, released in 2002, is a high-end power cord engineered to reduce noise, improve current delivery, and enhance musical clarity in reference audio systems.
• Conductor Technology – Utilises Siltech’s proprietary G7 silver-gold alloy conductors with advanced dielectric insulation, delivering low resistance, excellent conductivity, and superior preservation of micro-dynamics and tonal purity.
• Sonic Performance – Siltech Ruby Mountain 2 Power Cable delivers a quieter noise floor, improved bass authority, enhanced midrange texture, and refined treble extension, benefiting amplifiers, source components, and digital front ends.
• Specifications – Features multi-strand G7 silver-gold conductors, heavy shielding for EMI and RFI rejection, high-current capability up to 16A, and premium connectors ensuring secure contact and consistent power transfer.
• Dimensions – Typically supplied in 2.0 m length, with a thick, flexible jacket designed for durability and ease of routing in high-end audio racks and power distribution setups.
• Weight – Approximately 1.0 kg for a 2.0 m cable, reflecting dense conductor geometry, advanced shielding layers, and robust connector construction.
For Prices LoginSiltech Ruby Mountain 2 Power Cable (1.5m)
For Prices Login -
NBS Omega IV Speaker Cable (2.8m)
• Product Overview – NBS Omega IV Speaker Cable, released in the early 2010s, is a flagship reference speaker cable designed to maximize signal purity, dynamic realism, and tonal density in ultra-high-end audio systems.
• Conductor & Dielectric Design – Utilizing NBS’s proprietary rectangular solid-core conductors and advanced dielectric materials, the cable minimizes skin effect, phase distortion, and energy storage for superior coherence and musical flow.
• Sonic Performance – NBS Omega IV Speaker Cable delivers exceptional soundstage scale, explosive dynamics, and profound low-frequency authority while preserving microdetail, harmonic richness, and natural timbre across complex recordings.
• Specifications – Ultra-low resistance and inductance geometry, heavy-gauge multi-conductor architecture, high-current capability, and precision-terminated spades or bananas optimized for reference amplifiers and full-range loudspeakers.
• Dimensions – Available in various custom lengths, typically supplied in 2.0–3.0 meter stereo pairs, with substantial cable diameter reflecting its complex internal conductor and shielding structure.
• Weight – Approximately 4–5 kg per stereo pair depending on length, indicating massive conductor mass, dense dielectric layering, and mechanically damped outer jackets.
For Prices LoginNBS Omega IV Speaker Cable (2.8m)
For Prices Login -
Soulines The Loop Phono
• Product Overview – Soulines The Loop Phono, released in 2017, is a tube phono preamplifier engineered for serious vinyl playback, focusing on low noise, wide bandwidth, and precise analogue signal preservation.
• Circuit Design – Designed with a fully discrete, dual-mono topology and carefully optimized grounding, the phono stage minimizes interference and preserves micro-detail, timing accuracy, and dynamic expression from analogue sources.
• Analogue Performance – Soulines The Loop Phono delivers an open soundstage, natural tonal balance, and excellent transient clarity, making it well suited for high-resolution moving-magnet and moving-coil cartridge systems.
• Specifications – Supports MM and MC cartridges with selectable gain and loading, accurate RIAA equalization, ultra-low noise floor, and high headroom to accommodate wide dynamic swings without compression.
• Dimensions – Approx. 430 mm (W) × 120 mm (H) × 330 mm (D), housed in a rigid, resonance-controlled enclosure designed to reduce mechanical vibration and electrical interference.
• Weight – Approximately 8 kg, reflecting a substantial linear power supply and robust internal layout optimized for stable, low-noise analogue operation.
For Prices LoginSoulines The Loop Phono
For Prices Login -
PLiXiR Elite BAC 3000 Conditioner with Audio Replas Socket
• PLiXiR Elite BAC 3000 Conditioner with Audio Replas Socket Overview – The PLiXiR Elite BAC 3000, released around 2016, is a balanced AC power conditioner engineered to deliver ultra-low-noise, stable power, further enhanced by the premium Audio Replas outlet for superior conductivity.
• Ultra-Low-Noise Balanced Power – Using a large toroidal balanced transformer and careful grounding topology, the Elite BAC 3000 reduces common-mode noise, improves micro-detail, and enhances dynamics across high-resolution audio systems.
• Audio Replas Socket Enhancement – The upgraded Audio Replas receptacle provides superior electrical contact, lower resistance, and improved power transfer, allowing the PLiXiR Elite BAC 3000 to unlock cleaner transients and more natural tonal texture.
• Stable High-Current Delivery – Capable of powering demanding amplifiers and source components, the Elite BAC 3000 maintains voltage stability under load, improving bass control, imaging precision, and overall system coherence.
• Dimensions – Approx. 430 mm (W) × 160 mm (H) × 360 mm (D), with a low-resonance chassis designed for vibration control and optimal placement within high-end audio racks.
• Weight – Roughly 28–30 kg, largely due to its massive balanced transformer and reinforced enclosure, ensuring mechanical stability and superior noise isolation.
For Prices Login -
Tannoy Eyris DC3
• Overview – The Tannoy Eyris DC3, released in 2002, is a compact floorstanding loudspeaker featuring Tannoy’s renowned Dual Concentric driver technology for seamless point-source imaging and exceptional coherence across the frequency spectrum.
• Dual Concentric Precision – The Eyris DC3 delivers outstanding midrange clarity and precise spatial projection, benefiting from Tannoy’s coaxial driver layout that ensures uniform dispersion and improved timing accuracy in real-world rooms.
• Controlled Bass Performance – Designed with a well-tuned cabinet and rear reflex port, the Tannoy Eyris DC3 produces articulate low frequencies with strong extension while maintaining tight control suitable for both music and home audio setups.
• Premium Construction – The Eyris DC3 employs high-rigidity enclosures with real-wood veneers, low-resonance panels, and quality crossover components, enhancing transparency and long-term performance stability.
• Dimensions – Approx. 926 mm (H) × 204 mm (W) × 277 mm (D), providing an elegant footprint that fits comfortably into medium-sized listening environments.
• Weight – Approx. 16.5 kg per speaker, offering solid cabinet mass for reduced vibration and improved driver accuracy.
For Prices LoginTannoy Eyris DC3
For Prices Login
NBS is an American high-end audio cable manufacturer known for its uncompromising approach to materials, construction, and signal transmission. The brand focuses on maximising conductivity and minimising signal loss through the use of advanced conductor metallurgy, complex cable geometries, and meticulous manufacturing processes.
NBS cables are designed as long-term reference products rather than frequently revised accessories. Because cable performance is rooted in physical and electrical fundamentals that evolve slowly, pre-owned NBS cables remain highly relevant when properly maintained. Many audiophiles retain NBS cabling across multiple system upgrades, reflecting the brand’s emphasis on durability and consistent sonic performance.
Across Singapore, Malaysia, and Southeast Asia, NBS is associated with high-resolution systems where transparency and tonal density are critical. On SoundTribeAsia, NBS products — new and pre-owned — are listed by verified dealers, offering transparent sourcing, clear condition details, and the assurance of purchasing through a trusted regional marketplace.