-
JBL 4635
• Overview – The JBL 4635 is a professional cinema subwoofer system engineered for high-output low-frequency reinforcement, utilizing dual 15-inch drivers in a large vented enclosure for powerful theatre-grade bass performance.
• Cinema Heritage – Designed for professional cinema installations, the JBL 4635 delivers deep, room-filling bass with exceptional dynamic capability, making it a legendary choice for large listening spaces and vintage high-efficiency systems.
• High-Output Performance – The JBL 4635 is capable of substantial acoustic output and extended low-frequency reproduction, providing impactful bass response that complements high-efficiency horn or large-format loudspeaker systems.
• Specifications – Dual 15-inch low-frequency drivers (typically JBL 2225H or 2226H depending on configuration), bass reflex enclosure, 4-ohm nominal impedance, frequency response approximately 30Hz–500Hz, high power handling exceeding 600W continuous.
• Dimensions – Approximately 1219 mm (H) × 762 mm (W) × 610 mm (D), reflecting its large cinema-grade enclosure designed for high acoustic efficiency and powerful low-frequency projection.
• Weight – Approximately 85–95 kg depending on driver configuration, constructed with heavy-duty cabinetry and professional drivers intended for demanding theatre and large venue applications.
For Prices Login -
Edge G3 Integrated Amplifier
• Overview – The Edge G3 Integrated Amplifier, released in the early 2000s, is a solid state Class AB integrated amplifier featuring high-current output stages and refined preamplification for authoritative, full-range loudspeaker control.
• Power & Drive – Delivering substantial current capability, Edge G3 Integrated Amplifier provides confident bass authority and stable performance into demanding loads, maintaining composure and dynamic headroom during complex musical passages.
• Build & Circuitry – Built with robust chassis construction and dual-mono inspired layout, the design emphasizes short signal paths and substantial power supply reserves to preserve transparency and channel separation.
• Specifications – Solid state Class AB topology, approximately 100–150 watts per channel into 8 ohms, high-current output stage, multiple line-level inputs, frequency response extending beyond 20 Hz–20 kHz with low distortion.
• Dimensions – Approximate dimensions are 430 mm wide × 150 mm high × 400 mm deep, providing substantial internal transformer space while fitting standard hi-fi racks.
• Weight – Weighing approximately 18–22 kg, the amplifier’s mass reflects its large power transformer and heat-sinking required for sustained high-current operation.
For Prices LoginEdge G3 Integrated Amplifier
For Prices Login -
Siltech Ruby Mountain 2 Power Cable (1.5m)
• Overview – Siltech Ruby Mountain 2 Power Cable, released in 2002, is a high-end power cord engineered to reduce noise, improve current delivery, and enhance musical clarity in reference audio systems.
• Conductor Technology – Utilises Siltech’s proprietary G7 silver-gold alloy conductors with advanced dielectric insulation, delivering low resistance, excellent conductivity, and superior preservation of micro-dynamics and tonal purity.
• Sonic Performance – Siltech Ruby Mountain 2 Power Cable delivers a quieter noise floor, improved bass authority, enhanced midrange texture, and refined treble extension, benefiting amplifiers, source components, and digital front ends.
• Specifications – Features multi-strand G7 silver-gold conductors, heavy shielding for EMI and RFI rejection, high-current capability up to 16A, and premium connectors ensuring secure contact and consistent power transfer.
• Dimensions – Typically supplied in 2.0 m length, with a thick, flexible jacket designed for durability and ease of routing in high-end audio racks and power distribution setups.
• Weight – Approximately 1.0 kg for a 2.0 m cable, reflecting dense conductor geometry, advanced shielding layers, and robust connector construction.
For Prices LoginSiltech Ruby Mountain 2 Power Cable (1.5m)
For Prices Login -
Soulines The Loop Phono
• Product Overview – Soulines The Loop Phono, released in 2017, is a tube phono preamplifier engineered for serious vinyl playback, focusing on low noise, wide bandwidth, and precise analogue signal preservation.
• Circuit Design – Designed with a fully discrete, dual-mono topology and carefully optimized grounding, the phono stage minimizes interference and preserves micro-detail, timing accuracy, and dynamic expression from analogue sources.
• Analogue Performance – Soulines The Loop Phono delivers an open soundstage, natural tonal balance, and excellent transient clarity, making it well suited for high-resolution moving-magnet and moving-coil cartridge systems.
• Specifications – Supports MM and MC cartridges with selectable gain and loading, accurate RIAA equalization, ultra-low noise floor, and high headroom to accommodate wide dynamic swings without compression.
• Dimensions – Approx. 430 mm (W) × 120 mm (H) × 330 mm (D), housed in a rigid, resonance-controlled enclosure designed to reduce mechanical vibration and electrical interference.
• Weight – Approximately 8 kg, reflecting a substantial linear power supply and robust internal layout optimized for stable, low-noise analogue operation.
For Prices LoginSoulines The Loop Phono
For Prices Login -
PLiXiR Elite BAC 3000 Conditioner with Audio Replas Socket
• PLiXiR Elite BAC 3000 Conditioner with Audio Replas Socket Overview – The PLiXiR Elite BAC 3000, released around 2016, is a balanced AC power conditioner engineered to deliver ultra-low-noise, stable power, further enhanced by the premium Audio Replas outlet for superior conductivity.
• Ultra-Low-Noise Balanced Power – Using a large toroidal balanced transformer and careful grounding topology, the Elite BAC 3000 reduces common-mode noise, improves micro-detail, and enhances dynamics across high-resolution audio systems.
• Audio Replas Socket Enhancement – The upgraded Audio Replas receptacle provides superior electrical contact, lower resistance, and improved power transfer, allowing the PLiXiR Elite BAC 3000 to unlock cleaner transients and more natural tonal texture.
• Stable High-Current Delivery – Capable of powering demanding amplifiers and source components, the Elite BAC 3000 maintains voltage stability under load, improving bass control, imaging precision, and overall system coherence.
• Dimensions – Approx. 430 mm (W) × 160 mm (H) × 360 mm (D), with a low-resonance chassis designed for vibration control and optimal placement within high-end audio racks.
• Weight – Roughly 28–30 kg, largely due to its massive balanced transformer and reinforced enclosure, ensuring mechanical stability and superior noise isolation.
For Prices Login -
JBL Synthesis Project Array 1400
• High-Performance Overview – The JBL Synthesis Project Array 1400, launched around 2007, is a flagship floorstanding loudspeaker using a Bi-Radial horn and powerful low-frequency system to deliver dynamic, room-filling cinema-grade sound.
• Horn-Loaded Precision – The JBL Synthesis Project Array 1400 features a titanium compression driver and advanced horn geometry, providing exceptional clarity, wide dispersion, and precise imaging ideal for both music and home-theater environments.
• Deep, Controlled Bass – A massive 14-inch Neodymium woofer delivers authoritative low frequencies with excellent transient response, enabling the Project Array 1400 to handle demanding low-end material while maintaining accuracy and control.
• Ultra-High Output Capability – With high sensitivity and robust driver construction, the JBL Synthesis Project Array 1400 achieves reference-level dynamics, low distortion, and impactful realism even at elevated listening levels.
• Dimensions – Approx. 1,115 mm (H) × 508 mm (W) × 406 mm (D). Large cabinet volume supports deep bass extension and wide sound dispersion across medium to large rooms.
• Weight – Approx. 64 kg per speaker, providing exceptional mechanical stability and reducing cabinet resonance for cleaner, more accurate acoustic performance.
For Prices LoginJBL Synthesis Project Array 1400
For Prices Login -
JBL HP 520 Speakers
• High-Performance Design – The JBL HP 520 Speakers deliver dynamic, room-filling sound with impressive bass depth, refined midrange clarity, and excellent dispersion, making them ideal for audiophiles seeking a powerful yet balanced presentation.
• Acoustic Precision – Featuring advanced JBL driver engineering and a well-tuned cabinet, these speakers offer articulate imaging, smooth frequency response, and reliable performance across a wide range of musical genres and listening environments.
• Versatile System Matching – The JBL HP 520 Speakers pair effectively with solid-state or tube amplification, offering stable impedance behavior and strong efficiency, ensuring consistent performance across diverse hi-fi system setups.
• Robust Build Quality – Constructed with solid cabinetry and high-quality drivers, the JBL HP 520 Speakers provide durability, low resonance, and long-term performance ideal for serious home audio enthusiasts.
• Dimensions – Each speaker measures approximately 680 mm (H) × 380 mm (W) × 300 mm (D), offering a substantial footprint while remaining manageable for medium to large listening rooms.
• Weight – Each unit weighs around 18–20 kg, providing cabinet stability and reducing unwanted vibration for improved sonic accuracy.
For Prices LoginJBL HP 520 Speakers
For Prices Login
