-
Soulnote M3 Mono Amplifier
• Overview – The Soulnote M3 Mono Amplifier, released in 2019, is a solid state pure Class A monoblock design engineered with zero global feedback topology to deliver ultra-fast transient response and uncompromised musical transparency.
• Circuit Architecture – Built around Soulnote’s non-parallel push-pull output stage and discrete driver design, the amplifier emphasizes instantaneous current delivery, wide bandwidth, and exceptionally low phase distortion.
• Sonic Character – The Soulnote M3 Mono Amplifier is celebrated for explosive dynamics, deep tonal saturation, and expansive soundstage layering, making it ideal for high-resolution loudspeakers requiring precision and authority.
• Specifications – Pure Class A solid state topology, approximately 200W into 8Ω and 400W into 4Ω, wide frequency response beyond 20Hz–100kHz, extremely low distortion, and high current capability for difficult loads.
• Dimensions – Each chassis measures approximately 454 mm wide × 189 mm high × 430 mm deep, requiring generous ventilation to support continuous Class A thermal operation.
• Weight – Each monoblock weighs roughly 32 kg, reflecting oversized transformers, heavy aluminum construction, and substantial heat sinking for stable, long-term performance.
For Prices LoginSoulnote M3 Mono Amplifier
For Prices Login -
SoulNote A-2 Ver. 2 Integrated Amplifier
Soulnote A-2 v2
Soulnote A-2 v2 is a fully balanced, non NFB integrated amplifier designed to preserve timing, texture, and dynamic swing while offering flexible operating modes for real systems.
Design and engineering
The A-2 v2 carries Soulnote’s discrete, wide bandwidth gain architecture with a short signal path and mechanical tuning derived from the Series 3 program. Revisions to device selection, biasing, and grounding reduce stored energy and lower audible residue, yielding cleaner transients and a more stable image.
What changed from A-2 (previous version)
The v2 platform strengthens current delivery and simplifies the voltage gain loop for higher purity. The driver stage also uses the same TO3P transistor as the output stage. By passing a large current through the driver, it instantly compensates for HFE fluctuations caused by current changes in the output stage. This is the biggest difference and breakthrough from the prior version. The power amp mode now hard bypasses selector and volume control for those who prefer a separate preamp. Chassis and top cover treatment improve resonance control compared to the earlier A-2.
Connectivity and control
Balanced and single ended inputs are relay switched, with a balanced attenuator for consistent channel tracking. Four modes cover integrated stereo, bi amp mono, power amp stereo, and power amp bi amp. Control logic is isolated so audio circuits remain quiet during operation.
What distinguishes it
Fast, high current drive with a lively, uncompressed presentation and the flexibility to act as a true power amp when required.
Who it is for
Listeners who value natural timing, wide bandwidth clarity, and the option to reconfigure the amplifier as their system evolves.
In the box
Main unit, metal remote control, AC power cable, spike feet, documentation.
For Prices LoginSoulNote A-2 Ver. 2 Integrated Amplifier
For Prices Login -
TAD Evolution One TX
• Product Overview – The TAD Evolution One TX (2016) is a high-end floorstanding loudspeaker engineered in Japan, combining studio-grade accuracy with refined musicality for reference-level two-channel listening environments.
• Driver Technology – Utilizing TAD’s Coherent Source Transducer with beryllium tweeter and midrange diaphragm, the TAD Evolution One TX delivers exceptional phase coherence, pinpoint imaging, and ultra-low distortion across the audible spectrum.
• Cabinet & Voicing – A rigid, low-resonance enclosure with curved side panels minimizes standing waves, allowing the speaker to produce deep, controlled bass while preserving tonal neutrality and dynamic realism at high playback levels.
• Specifications – Nominal impedance 4 ohms, sensitivity approximately 90 dB, frequency response around 28 Hz–60 kHz, recommended amplifier power 50–300 W, optimized for high-current solid-state or quality tube amplification.
• Dimensions – Each speaker measures approximately 400 mm wide × 1,154 mm high × 530 mm deep, designed as a full-scale reference floorstander suitable for medium to large dedicated listening rooms.
• Weight – Each unit weighs roughly 95 kg, reflecting extensive internal bracing and premium materials that contribute to mechanical stability, resonance control, and consistent acoustic performance.
For Prices LoginTAD Evolution One TX
For Prices Login -
SoulNote RSC Speaker Cables (3m)
• Product Overview – SoulNote RSC Speaker Cables (3m), released in the late-2010s, reflect SoulNote’s purist design philosophy, focusing on ultra-low loss signal transfer, mechanical resonance control, and natural musical expression.
• Cable Design Philosophy – Built using high-purity copper conductors and SoulNote’s resonance-controlled construction, these cables minimise stored energy and phase distortion, preserving timing accuracy, dynamics, and tonal neutrality across wideband loudspeakers.
• Sonic Performance – The SoulNote RSC Speaker Cables (3m) deliver fast transient response, clean bass articulation, and an open midrange, making them ideal for revealing high-resolution systems that prioritise realism and rhythmic coherence.
• Specifications – Low-resistance conductor geometry, carefully managed inductance and capacitance, non-magnetic materials throughout, and mechanically damped structure to reduce vibration-induced coloration and maintain consistent electrical characteristics.
• Dimensions – Each cable is supplied in a 3-metre length, offering practical reach for most floorstanding speaker placements while maintaining consistent impedance and signal integrity throughout the full run.
• Weight – Moderate overall mass reflecting solid conductor density and damping materials, designed to provide stability without placing excessive mechanical stress on amplifier or loudspeaker binding posts.
For Prices LoginSoulNote RSC Speaker Cables (3m)
For Prices Login -
SOULNOTE D-3 DAC
• Overview – SOULNOTE D-3 DAC, released in 2020, is a reference-class digital-to-analog converter designed with SoulNote’s zero-feedback architecture to deliver highly accurate, ultra-low distortion conversion and musical transparency.
• Digital Architecture – Utilising discrete analogue filter stages and precision clocking, the D-3 DAC preserves timing integrity and dynamic expression, providing outstanding resolution and spatial coherence from PCM and DSD sources.
• Sound Quality – The SOULNOTE D-3 DAC is prized for its natural midrange clarity, refined treble extension, and low noise floor, allowing connected preamplifiers and amplifiers to reveal deeper musical nuance across genres.
For Prices LoginSOULNOTE D-3 DAC
For Prices Login -
SOULNOTE A-3 Reference Integrated Amplifier
• Overview – SOULNOTE A-3 Reference Integrated Amplifier, released in 2021, is a solid-state Class AB integrated design without DAC or phono, engineered for ultimate signal purity and unrestricted current delivery.
• Circuit Philosophy – Built around SoulNote’s zero-feedback, non-parallel architecture, the amplifier prioritises instantaneous current response, wide bandwidth, and natural harmonic flow, appealing strongly to purist audiophiles.
• Sonic Character – SOULNOTE A-3 Reference Integrated Amplifier delivers exceptional dynamic contrast, dense tonal colour, and expansive soundstage depth, excelling with difficult loudspeaker loads and revealing high-resolution source components.
• Specifications – Rated at approximately 120 W per channel into 8 ohms and 240 W into 4 ohms, with ultra-high current capability, wide frequency response, and discrete output devices optimised for low impedance control.
For Prices LoginSOULNOTE A-3 Reference Integrated Amplifier
For Prices Login -
SoulNote A-1 Ver. 2 Integrated Amplifier
• Product Overview – SoulNote A-1 Ver. 2 Integrated Amplifier, released in 2022, is a solid-state Class AB integrated amplifier using Soulnote’s zero-feedback philosophy, delivering exceptional speed, transparency, and natural musical flow.
• Circuit Architecture – Designed with fully discrete, non-NFB circuitry and simplified signal paths, the amplifier prioritises phase accuracy, micro-dynamic resolution, and tonal purity, appealing to listeners seeking uncoloured, high-resolution playback.
• Sound Performance – The SoulNote A-1 Ver. 2 Integrated Amplifier offers agile bass control, vivid midrange articulation, and extended treble clarity, pairing effortlessly with revealing loudspeakers and high-quality digital or analog sources.
• Specifications – Output power is approximately 80 W per channel into 8 ohms and 160 W into 4 ohms, featuring wide bandwidth, high current delivery, and a robust linear power supply.
• Dimensions – Approximate chassis dimensions are 454 mm (W) × 179 mm (H) × 407 mm (D), housed in a resonance-controlled aluminium enclosure optimised for electrical stability and thermal management.
• Weight – The unit weighs approximately 24 kg, reflecting its substantial transformer, high-capacity power supply components, and rigid mechanical construction designed to minimise vibration and noise.
For Prices LoginSoulNote A-1 Ver. 2 Integrated Amplifier
For Prices Login -
TAD Compact Reference CR1
• Overview – TAD Compact Reference CR1, released in 2011, is a high-end standmount loudspeaker engineered to deliver reference-level neutrality, precision imaging, and studio-grade accuracy derived from TAD’s professional monitor heritage.
• Driver Technology – Featuring TAD’s proprietary concentric CST driver with beryllium tweeter and magnesium midrange, it achieves point-source coherence, exceptional phase alignment, and ultra-low distortion across the audible frequency range.
• Sonic Performance – TAD Compact Reference CR1 is celebrated for its transparency, holographic soundstage, and tonal realism, excelling with acoustic, orchestral, and complex recordings where timing and micro-detail are critical.
• Specifications – Two-way bass-reflex design, nominal 4-ohm impedance, sensitivity approx. 87 dB, frequency response roughly 45 Hz–100 kHz, rear-firing port, and high-quality crossover components optimized for minimal signal loss.
• Dimensions – Approx. 410 mm (H) × 250 mm (W) × 360 mm (D), offering a substantial standmount form factor designed for rigid placement on dedicated speaker stands in reference listening environments.
• Weight – Approximately 18 kg per speaker, reflecting dense cabinet construction, internal bracing, and premium driver assemblies required for resonance control and uncompromised acoustic performance.
For Prices LoginTAD Compact Reference CR1
For Prices Login -
Revel Ultima Salon 2
• Product Overview – Revel Ultima Salon 2, released in 2008, is a flagship four-way floorstanding loudspeaker engineered for absolute neutrality, extreme dynamic range, and reference-level accuracy in high-end listening environments.
• Acoustic Design – Advanced waveguide geometry, titanium tweeter, ceramic composite midrange, and multiple aluminum-cone woofers deliver seamless integration, wide dispersion, and exceptionally low distortion across the entire frequency spectrum.
• Sonic Performance – Revel Ultima Salon 2 offers deep controlled bass, holographic imaging, and tonal realism, excelling with complex orchestral passages while preserving micro-detail and transient precision at all listening levels.
• Specifications – Four-way design with dual 8-inch woofers, one 8-inch mid-bass, 4-inch midrange, and 1-inch tweeter; sensitivity approximately 86 dB, nominal impedance 6 ohms.
• Dimensions – Each speaker measures approximately 1190 mm (H) × 350 mm (W) × 460 mm (D), providing substantial cabinet volume for extended bass response and optimized driver loading.
• Weight – Each Revel Ultima Salon 2 loudspeaker weighs approximately 77 kg, reflecting massive internal bracing, thick cabinetry, and vibration-controlled construction for uncompromised acoustic performance.
For Prices LoginRevel Ultima Salon 2
For Prices Login -
Revel Performa F32
• Revel Performa F32 Engineering – The Revel Performa F32 is a three-way floorstander using advanced waveguides and low-distortion drivers to deliver neutral, accurate, and dynamically expressive sound suitable for demanding audiophile systems.
• Refined Driver Architecture – Featuring dual 6.5-inch woofers, a dedicated midrange unit, and an aluminum-dome tweeter, the F32 achieves outstanding clarity, wide bandwidth, and low compression even at higher listening levels.
• Exceptional Tonal Accuracy – Designed through extensive double-blind evaluation, the Performa F32 produces a remarkably linear response with smooth off-axis behaviour, ensuring consistent performance across diverse room acoustics.
• Dynamic and Controlled Bass – The F32 delivers tight, extended bass through optimized port tuning and rigid cabinet design, offering authoritative low-frequency presence without sacrificing speed or control.
• Dimensions – Approx. 1,100 mm (H) × 267 mm (W) × 330 mm (D), providing a slim profile that fits comfortably into modern listening spaces while maintaining strong acoustic performance.
• Weight – Each speaker weighs about 33 kg, supporting reduced vibration, improved driver stability, and enhanced resolution across the frequency spectrum.
For Prices LoginRevel Performa F32
For Prices Login -
Adcom GFP-555 Preamp and GFA-5800 Power Amp
• Classic Adcom System – The Adcom GFP-555 Preamp and GFA-5800 Power Amp, introduced in the early 1990s, deliver robust solid-state performance with high-current Class AB amplification, offering strong dynamics and clean, authoritative control.
• High-Resolution Preamp Design – The GFP-555 features low-noise circuitry, precise tone controls, a high-quality phono stage, and multiple inputs, giving the Adcom GFP-555 Preamp and GFA-5800 Power Amp excellent system flexibility.
• Powerful Amplification – The GFA-5800, designed by Nelson Pass, provides 250W per channel into 8 ohms with massive current reserves. This ensures the Adcom GFP-555 Preamp and GFA-5800 Power Amp can drive difficult speakers with ease.
• Musical, Neutral Presentation – The pairing delivers fast transient response, wide soundstage, and neutral tonal balance, making it a sought-after vintage combo for both audiophiles and collectors seeking reliable performance.
• Dimensions – Preamp: approx. 432 × 89 × 330 mm. Power amp: approx. 432 × 203 × 483 mm. Designed to fit standard audio racks with deep shelves.
• Weight – Preamp weighs about 7 kg; power amp around 28–30 kg, thanks to its heavy transformer and large heat sinks for stable high-current operation.
For Prices LoginAdcom GFP-555 Preamp and GFA-5800 Power Amp
For Prices Login -
Gustard X26 Pro DAC
• Flagship DAC Architecture – The Gustard X26 Pro DAC, launched in early 2021, uses dual ESS9038PRO chips in fully balanced configuration to deliver exceptional transparency, ultra-low distortion, and reference-grade digital processing for demanding systems.
• Advanced Clocking System – Featuring Accusilicon femtosecond clocks and independent power regulation, the X26 Pro achieves impressively low jitter, improving imaging precision, micro-detail retrieval, and overall spatial coherence in complex recordings.
• Versatile Connectivity – The Gustard X26 Pro DAC supports USB, I²S, AES/EBU, coaxial, and optical inputs, with PCM up to 768 kHz and DSD512, ensuring compatibility with high-resolution sources and modern streaming transports.
• Robust Analog Output Stage – Its fully discrete, fully balanced Class A output stage provides strong drive, natural tonality, and excellent dynamic range, making the X26 Pro suitable for both preamps and direct power-amp integration.
• Dimensions – Measures approximately 330 mm (W) × 260 mm (D) × 65 mm (H), offering a compact yet substantial chassis designed for vibration control and thermal stability.
• Weight – Weighs around 5.8 kg, with its heavy aluminum enclosure enhancing durability, shielding, and noise suppression for cleaner digital-to-analog conversion.
For Prices LoginGustard X26 Pro DAC
For Prices Login -
Adcom GFP-345 Pre-Amp and GFA-535 mk2 Amplifier
• Adcom GFP-345 Pre-Amp and GFA-535 Mk2 Amplifier – A classic solid-state pairing featuring a fully Class AB power stage, offering clean, authoritative drive and exceptional value for enthusiasts seeking transparent, reliable high-fidelity performance.
• Refined Preamp Control – The GFP-345 provides precise volume management, clean signal routing, high-quality phono stage support, and low-noise circuitry, enabling a neutral presentation with impressive musical clarity across varied source components.
• Dynamic Class AB Power – The GFA-535 Mk2 delivers approximately 60W per channel into 8 ohms with robust current delivery, maintaining excellent channel separation, punchy dynamics, and stable operation even with moderately difficult loudspeaker loads.
• Synergistic System Performance – Together, the GFP-345 and GFA-535 Mk2 create a cohesive soundstage with firm bass control, open midrange, and smooth treble, making this combo a proven choice for budget-conscious yet discerning listeners.
• Dimensions – GFP-345: approx. 432 mm (W) × 76 mm (H) × 330 mm (D). GFA-535 Mk2: approx. 432 mm (W) × 140 mm (H) × 330 mm (D). Fits standard racks comfortably.
• Weight – GFP-345 weighs around 5–6 kg, while GFA-535 Mk2 weighs roughly 10–11 kg, with a solid transformer and steel chassis enhancing durability and vibration resistance.
For Prices Login
Adcom is an American audio electronics brand known for delivering high-current amplification and robust engineering at accessible price points. Rising to prominence through its power amplifiers and preamplifiers, Adcom focused on reliability, drive capability, and straightforward circuit design.
Adcom amplifiers are built with conservative engineering margins and substantial power supplies, allowing many models to remain in active use decades after release. This makes pre-owned Adcom equipment especially attractive to listeners seeking dependable amplification with lasting performance.
Across Singapore, Malaysia, and Southeast Asia, Adcom continues to appeal to value-conscious audiophiles building reliable systems. On SoundTribeAsia, Adcom equipment — new and pre-owned — is offered by verified dealers, providing transparent listings and trusted access through a regional marketplace.