-
TAD Evolution One TX
• Product Overview – The TAD Evolution One TX (2016) is a high-end floorstanding loudspeaker engineered in Japan, combining studio-grade accuracy with refined musicality for reference-level two-channel listening environments.
• Driver Technology – Utilizing TAD’s Coherent Source Transducer with beryllium tweeter and midrange diaphragm, the TAD Evolution One TX delivers exceptional phase coherence, pinpoint imaging, and ultra-low distortion across the audible spectrum.
• Cabinet & Voicing – A rigid, low-resonance enclosure with curved side panels minimizes standing waves, allowing the speaker to produce deep, controlled bass while preserving tonal neutrality and dynamic realism at high playback levels.
• Specifications – Nominal impedance 4 ohms, sensitivity approximately 90 dB, frequency response around 28 Hz–60 kHz, recommended amplifier power 50–300 W, optimized for high-current solid-state or quality tube amplification.
• Dimensions – Each speaker measures approximately 400 mm wide × 1,154 mm high × 530 mm deep, designed as a full-scale reference floorstander suitable for medium to large dedicated listening rooms.
• Weight – Each unit weighs roughly 95 kg, reflecting extensive internal bracing and premium materials that contribute to mechanical stability, resonance control, and consistent acoustic performance.
For Prices LoginTAD Evolution One TX
For Prices Login -
Apogee Stage Speakers
• Product Overview – The Apogee Stage Speakers, released circa 1990, are full-range planar ribbon loudspeakers designed for high-resolution, low-distortion playback, delivering the open, fast transient response Apogee is renowned for.
• Ribbon Loudspeaker Performance – Featuring true ribbon midrange and tweeter elements, these speakers deliver lightning-fast transients, exceptional clarity, and expansive soundstaging that rewards high-quality amplification and careful system matching.
• Design & Sonic Character – The Apogee Stage Speakers use a dipole radiation pattern with large ribbon surfaces, producing natural tonal balance, deep image layering, and lifelike vocal reproduction unmatched by conventional dynamic driver designs.
• Specifications – Nominal impedance is approximately 3–4 ohms with sensitivity around 86 dB, requiring high-current amplifiers capable of stable low-impedance drive to unlock their full dynamic and tonal potential.
• Dimensions – Each speaker measures approximately 1220 mm (H) × 560 mm (W) × 60 mm (D), with a slim vertical profile that still demands adequate floor space and thoughtful room placement.
• Weight – Each speaker weighs roughly 32 kg, reflecting the substantial ribbon assemblies, rigid frame construction, and damping required for mechanical stability and accurate ribbon driver operation.
For Prices LoginApogee Stage Speakers
For Prices Login -
Fidelity Research FR-64S Tonearm
• Product Overview – Fidelity Research FR-64S Tonearm, released in the late 1970s, is a high-mass Japanese precision tonearm engineered for low-compliance moving-coil cartridges, prized for authority, stability, and classic analog performance.
• High-Mass Engineering – The stainless-steel arm tube and robust bearing assembly provide exceptional rigidity and resonance control, enabling confident tracking, powerful bass reproduction, and tonal weight favored by serious vinyl collectors.
• Analog Playback Character – Renowned for its authoritative, organic presentation, the Fidelity Research FR-64S Tonearm delivers expansive soundstage scale, solid imaging, and a natural midrange, especially when paired with classic MC cartridges.
• Specifications – Effective length approximately 244 mm, effective mass around 30 g, static balance design, detachable headshell interface, and adjustable tracking force and anti-skate optimized for low-compliance cartridges.
• Dimensions – Mounting distance approximately 230 mm, with substantial base assembly designed to accommodate heavy platters and rigid plinths commonly used in high-mass turntable designs.
• Weight – Approximate total mass of 1.6 kg including base and headshell, contributing to excellent mechanical damping, reduced vibration, and consistent groove tracing under demanding playback conditions.
For Prices LoginFidelity Research FR-64S Tonearm
For Prices Login -
TAD Compact Reference CR1
• Overview – TAD Compact Reference CR1, released in 2011, is a high-end standmount loudspeaker engineered to deliver reference-level neutrality, precision imaging, and studio-grade accuracy derived from TAD’s professional monitor heritage.
• Driver Technology – Featuring TAD’s proprietary concentric CST driver with beryllium tweeter and magnesium midrange, it achieves point-source coherence, exceptional phase alignment, and ultra-low distortion across the audible frequency range.
• Sonic Performance – TAD Compact Reference CR1 is celebrated for its transparency, holographic soundstage, and tonal realism, excelling with acoustic, orchestral, and complex recordings where timing and micro-detail are critical.
• Specifications – Two-way bass-reflex design, nominal 4-ohm impedance, sensitivity approx. 87 dB, frequency response roughly 45 Hz–100 kHz, rear-firing port, and high-quality crossover components optimized for minimal signal loss.
• Dimensions – Approx. 410 mm (H) × 250 mm (W) × 360 mm (D), offering a substantial standmount form factor designed for rigid placement on dedicated speaker stands in reference listening environments.
• Weight – Approximately 18 kg per speaker, reflecting dense cabinet construction, internal bracing, and premium driver assemblies required for resonance control and uncompromised acoustic performance.
For Prices LoginTAD Compact Reference CR1
For Prices Login -
PMC AML2
• Overview – PMC AML2, released in 2008, is an active studio and audiophile monitor featuring built-in solid-state Class A/B amplification, designed to deliver extreme accuracy, speed, and dynamic realism in compact reference systems.
• Active Loudspeaker Design – Engineered with PMC’s Advanced Transmission Line technology, it offers exceptional bass extension, fast transient response, and precise imaging, outperforming many passive speakers of similar size in control and scale.
• System Performance – PMC AML2 is widely respected for its neutrality and revealing nature, making it ideal for critical listening, mastering environments, and high-end domestic systems seeking studio-grade resolution and tonal honesty.
• Specifications – Two-way active design with 6.5-inch mid-bass driver, soft-dome tweeter, dedicated 200W LF and 100W HF amplifiers, balanced XLR input, wide bandwidth, and high SPL capability with low distortion.
• Dimensions – Approx. 365 mm (H) × 193 mm (W) × 348 mm (D), compact enough for nearfield or stand-mounted use while accommodating the internal transmission line and amplification modules.
• Weight – Approximately 17 kg per speaker, reflecting robust cabinet construction, internal amplification, and transmission line loading required for controlled, resonance-free performance at professional reference levels.
For Prices Login -
PMC PB1i
• Product Overview – PMC PB1i, released in 2006, is a reference three-way floorstanding loudspeaker using advanced transmission line technology to deliver exceptional bass depth, scale, and studio-grade accuracy.
• Acoustic Design – Featuring PMC’s ATL transmission line, soft-dome midrange, and precision tweeter, the design offers extended low-frequency response, controlled dispersion, and effortless dynamics for realistic, full-range reproduction.
• Sound Performance – PMC PB1i delivers authoritative bass, highly articulate midrange, and smooth high frequencies, excelling in soundstage scale, tonal neutrality, and dynamic realism suited to high-resolution systems.
• Specifications – Nominal impedance is 8 ohms with a sensitivity of approximately 90 dB, recommended amplification from 30–300 watts, and a frequency response extending down to roughly 28 Hz.
• Dimensions – Each cabinet measures approximately 1040 mm (H) × 330 mm (W) × 450 mm (D), designed for optimal internal line length and stable floorstanding placement.
• Weight – Each speaker weighs approximately 47 kg, reflecting the heavily braced enclosure, long transmission line loading, and high-mass construction for resonance control.
For Prices Login