-
Soulnote M3 Mono Amplifier
• Overview – The Soulnote M3 Mono Amplifier, released in 2019, is a solid state pure Class A monoblock design engineered with zero global feedback topology to deliver ultra-fast transient response and uncompromised musical transparency.
• Circuit Architecture – Built around Soulnote’s non-parallel push-pull output stage and discrete driver design, the amplifier emphasizes instantaneous current delivery, wide bandwidth, and exceptionally low phase distortion.
• Sonic Character – The Soulnote M3 Mono Amplifier is celebrated for explosive dynamics, deep tonal saturation, and expansive soundstage layering, making it ideal for high-resolution loudspeakers requiring precision and authority.
• Specifications – Pure Class A solid state topology, approximately 200W into 8Ω and 400W into 4Ω, wide frequency response beyond 20Hz–100kHz, extremely low distortion, and high current capability for difficult loads.
• Dimensions – Each chassis measures approximately 454 mm wide × 189 mm high × 430 mm deep, requiring generous ventilation to support continuous Class A thermal operation.
• Weight – Each monoblock weighs roughly 32 kg, reflecting oversized transformers, heavy aluminum construction, and substantial heat sinking for stable, long-term performance.
For Prices LoginSoulnote M3 Mono Amplifier
For Prices Login -
SoulNote A-2 Ver. 2 Integrated Amplifier
Soulnote A-2 v2
Soulnote A-2 v2 is a fully balanced, non NFB integrated amplifier designed to preserve timing, texture, and dynamic swing while offering flexible operating modes for real systems.
Design and engineering
The A-2 v2 carries Soulnote’s discrete, wide bandwidth gain architecture with a short signal path and mechanical tuning derived from the Series 3 program. Revisions to device selection, biasing, and grounding reduce stored energy and lower audible residue, yielding cleaner transients and a more stable image.
What changed from A-2 (previous version)
The v2 platform strengthens current delivery and simplifies the voltage gain loop for higher purity. The driver stage also uses the same TO3P transistor as the output stage. By passing a large current through the driver, it instantly compensates for HFE fluctuations caused by current changes in the output stage. This is the biggest difference and breakthrough from the prior version. The power amp mode now hard bypasses selector and volume control for those who prefer a separate preamp. Chassis and top cover treatment improve resonance control compared to the earlier A-2.
Connectivity and control
Balanced and single ended inputs are relay switched, with a balanced attenuator for consistent channel tracking. Four modes cover integrated stereo, bi amp mono, power amp stereo, and power amp bi amp. Control logic is isolated so audio circuits remain quiet during operation.
What distinguishes it
Fast, high current drive with a lively, uncompressed presentation and the flexibility to act as a true power amp when required.
Who it is for
Listeners who value natural timing, wide bandwidth clarity, and the option to reconfigure the amplifier as their system evolves.
In the box
Main unit, metal remote control, AC power cable, spike feet, documentation.
For Prices LoginSoulNote A-2 Ver. 2 Integrated Amplifier
For Prices Login -
SoulNote RSC Speaker Cables (3m)
• Product Overview – SoulNote RSC Speaker Cables (3m), released in the late-2010s, reflect SoulNote’s purist design philosophy, focusing on ultra-low loss signal transfer, mechanical resonance control, and natural musical expression.
• Cable Design Philosophy – Built using high-purity copper conductors and SoulNote’s resonance-controlled construction, these cables minimise stored energy and phase distortion, preserving timing accuracy, dynamics, and tonal neutrality across wideband loudspeakers.
• Sonic Performance – The SoulNote RSC Speaker Cables (3m) deliver fast transient response, clean bass articulation, and an open midrange, making them ideal for revealing high-resolution systems that prioritise realism and rhythmic coherence.
• Specifications – Low-resistance conductor geometry, carefully managed inductance and capacitance, non-magnetic materials throughout, and mechanically damped structure to reduce vibration-induced coloration and maintain consistent electrical characteristics.
• Dimensions – Each cable is supplied in a 3-metre length, offering practical reach for most floorstanding speaker placements while maintaining consistent impedance and signal integrity throughout the full run.
• Weight – Moderate overall mass reflecting solid conductor density and damping materials, designed to provide stability without placing excessive mechanical stress on amplifier or loudspeaker binding posts.
For Prices LoginSoulNote RSC Speaker Cables (3m)
For Prices Login -
SOULNOTE D-3 DAC
• Overview – SOULNOTE D-3 DAC, released in 2020, is a reference-class digital-to-analog converter designed with SoulNote’s zero-feedback architecture to deliver highly accurate, ultra-low distortion conversion and musical transparency.
• Digital Architecture – Utilising discrete analogue filter stages and precision clocking, the D-3 DAC preserves timing integrity and dynamic expression, providing outstanding resolution and spatial coherence from PCM and DSD sources.
• Sound Quality – The SOULNOTE D-3 DAC is prized for its natural midrange clarity, refined treble extension, and low noise floor, allowing connected preamplifiers and amplifiers to reveal deeper musical nuance across genres.
For Prices LoginSOULNOTE D-3 DAC
For Prices Login -
SOULNOTE A-3 Reference Integrated Amplifier
• Overview – SOULNOTE A-3 Reference Integrated Amplifier, released in 2021, is a solid-state Class AB integrated design without DAC or phono, engineered for ultimate signal purity and unrestricted current delivery.
• Circuit Philosophy – Built around SoulNote’s zero-feedback, non-parallel architecture, the amplifier prioritises instantaneous current response, wide bandwidth, and natural harmonic flow, appealing strongly to purist audiophiles.
• Sonic Character – SOULNOTE A-3 Reference Integrated Amplifier delivers exceptional dynamic contrast, dense tonal colour, and expansive soundstage depth, excelling with difficult loudspeaker loads and revealing high-resolution source components.
• Specifications – Rated at approximately 120 W per channel into 8 ohms and 240 W into 4 ohms, with ultra-high current capability, wide frequency response, and discrete output devices optimised for low impedance control.
For Prices LoginSOULNOTE A-3 Reference Integrated Amplifier
For Prices Login -
SoulNote A-1 Ver. 2 Integrated Amplifier
• Product Overview – SoulNote A-1 Ver. 2 Integrated Amplifier, released in 2022, is a solid-state Class AB integrated amplifier using Soulnote’s zero-feedback philosophy, delivering exceptional speed, transparency, and natural musical flow.
• Circuit Architecture – Designed with fully discrete, non-NFB circuitry and simplified signal paths, the amplifier prioritises phase accuracy, micro-dynamic resolution, and tonal purity, appealing to listeners seeking uncoloured, high-resolution playback.
• Sound Performance – The SoulNote A-1 Ver. 2 Integrated Amplifier offers agile bass control, vivid midrange articulation, and extended treble clarity, pairing effortlessly with revealing loudspeakers and high-quality digital or analog sources.
• Specifications – Output power is approximately 80 W per channel into 8 ohms and 160 W into 4 ohms, featuring wide bandwidth, high current delivery, and a robust linear power supply.
• Dimensions – Approximate chassis dimensions are 454 mm (W) × 179 mm (H) × 407 mm (D), housed in a resonance-controlled aluminium enclosure optimised for electrical stability and thermal management.
• Weight – The unit weighs approximately 24 kg, reflecting its substantial transformer, high-capacity power supply components, and rigid mechanical construction designed to minimise vibration and noise.
For Prices LoginSoulNote A-1 Ver. 2 Integrated Amplifier
For Prices Login -
Norstone Vintage Speaker Stands
• Overview – Norstone Vintage Speaker Stands, released in 2020, are retro-inspired loudspeaker supports combining classic aesthetics with modern rigidity, designed to improve speaker stability, resonance control, and overall sonic clarity.
• Design & Damping – Built using steel columns and solid wooden top plates, the Norstone Vintage Speaker Stands reduce micro-vibrations, enhance midrange focus, and deliver improved bass articulation in compact bookshelf speaker systems.
• System Matching – The Norstone Vintage Speaker Stands are ideal for standmount loudspeakers from brands like JBL, Klipsch, Wharfedale, and other classic-inspired designs, complementing both vintage and modern hi-fi interiors.
• Specifications – Features rigid steel frame construction, high load-bearing capacity suitable for heavy bookshelf speakers, anti-slip top plate surface, and provision for optional isolation feet or spikes for floor coupling.
• Dimensions – Overall dimensions (W x H x D): 380 x 260 x 280 mm, Rising height: 190 mm, max speaker weight is 60kg
For Prices LoginNorstone Vintage Speaker Stands
For Prices Login -
Argento Organic XLR Interconnect (1m)
• Overview – Argento Organic XLR Interconnect is a high-performance balanced analog cable derived from the engineering legacy of Argento Audio, designed to bring rich detail and musical neutrality to high-end systems.
• Cable Engineering – Developed by the same minds behind Argento’s Serenity range, the Organic XLR uses cryogenically treated, hyper-elliptic copper conductors with custom-made Argento connectors for tight contact and low resistance.
• Sound Quality – The Argento Organic XLR Interconnect is reported to deliver smooth midrange clarity, a natural tonal balance, and low microphony thanks to its damped air dielectric and handcrafted connector design.
• Specifications – Features high-purity OFC copper conductors based on Argento geometry, low dielectric absorption, cryo treatment, and precision machined connectors for reduced contact resistance and stable signal transmission.
• Dimensions – Available in variable lengths (1 m, 2 m, 3 m), allowing flexible integration into balanced analog rigs without compromising conductor geometry or shielding effectiveness.
• Weight – Lightweight design typical of balanced interconnects, with mass depending on length but engineered to avoid strain on XLR jacks while maintaining robust mechanical and electrical fidelity.
For Prices LoginArgento Organic XLR Interconnect (1m)
For Prices Login -
Norstone Epur 4 HiFi Rack
• Product Overview – The Norstone Epur 4 HiFi Rack, released in the late 2010s, is a four-tier equipment rack combining steel uprights and tempered glass shelves to provide stable, vibration-controlled support for hi-fi components.
• Rigid & Clean Construction – Featuring square steel columns and thick tempered glass platforms, the Epur 4 minimizes resonance and mechanical feedback, helping electronics perform with improved clarity, focus, and consistent tonal balance.
• Multi-Component Flexibility – Designed for full systems, the rack offers generous tier spacing for amplifiers, sources, and power supplies, while allowing effective airflow and tidy cable management in compact listening spaces.
• Modern Audiophile Aesthetics – The Norstone Epur 4 HiFi Rack blends minimalist design with functional engineering, making it suitable for contemporary interiors without compromising stability or long-term equipment support.
• Dimensions – Approx. 600 mm (W) × 450 mm (D) × 800 mm (H) overall, with shelf spacing optimized for standard-width hi-fi components and multi-box systems.
• Weight – Around 18 kg assembled, providing sufficient mass for vibration control while remaining practical to position and adjust within home audio environments.
For Prices LoginNorstone Epur 4 HiFi Rack
For Prices Login -
Norstone Bergen 2 Hifi Rack
• Product Overview – The Norstone Bergen 2 Hifi Rack, released in the late 2010s, is a compact modular equipment rack combining steel uprights and tempered glass shelves to support stable, vibration-controlled hi-fi system placement.
• Rigid Structural Design – Built with square steel columns and thick smoked glass shelves, the Bergen 2 Hifi Rack minimizes resonance, improves component stability, and enhances sonic clarity across both analogue and digital audio setups.
• Compact System Integration – Designed for space-conscious environments, the rack offers practical tier spacing, clean cable routing, and sufficient ventilation, making it ideal for integrated amplifiers, streamers, and compact power amplifiers.
• Everyday Audiophile Practicality – The Norstone Bergen 2 Hifi Rack supports moderate component weights while maintaining elegant aesthetics, providing a reliable and visually clean platform for modern living spaces.
• Dimensions – Approx. 600 mm (W) × 450 mm (D) × 400 mm (H) per shelf section, offering compatibility with standard-width hi-fi components and balanced vertical spacing.
• Weight – Roughly 15 kg assembled, delivering adequate mass for vibration control while remaining easy to position or relocate within home audio systems.
For Prices LoginNorstone Bergen 2 Hifi Rack
For Prices Login -
Norstone Stabbl Hifi Rack
• Product Overview – The Norstone Stabbl Hifi Rack, released in the late 2010s, is a modular steel-and-wood equipment rack designed to provide high load capacity, excellent vibration control, and clean aesthetics for high-end audio systems.
• Rigid Modular Construction – Built with solid steel legs and thick bamboo shelves, the Stabbl Hifi Rack minimizes resonance and offers exceptional structural stability, allowing sensitive electronics to perform with improved clarity and dynamic consistency.
• Audiophile-Oriented Design – Each tier is height-adjustable, enabling flexible component placement, proper ventilation, and optimized cable routing while maintaining a mechanically grounded platform for amplifiers, source components, and power supplies.
• System Compatibility – The Norstone Stabbl Hifi Rack supports heavy power amplifiers and multi-box systems, providing reliable isolation and consistent performance benefits across both analogue and digital audio setups.
• Dimensions – Typical shelf dimensions are approximately 590 mm (W) × 490 mm (D), with adjustable height spacing per tier to accommodate large-format hi-fi components and power conditioners.
• Weight – Around 18–20 kg per module depending on configuration, delivering substantial mass for effective vibration damping and long-term mechanical stability.
For Prices LoginNorstone Stabbl Hifi Rack
For Prices Login -
Norstone Stylum 3 Speaker Stand
• Product Overview – The Norstone Stylum 3 Speaker Stand, introduced in the mid-2010s, is a rigid steel loudspeaker stand engineered to improve stability, imaging focus, and bass control for stand-mount speakers.
• Rigid Steel Construction – Built with square-section steel columns and a heavy base plate, the Norstone Stylum 3 Speaker Stand reduces resonance and vibration, allowing speakers to perform with improved clarity, timing, and spatial precision.
• Optimised Speaker Support – The top plate accommodates a wide range of bookshelf speakers, while the mass-loadable central column enables fine tuning of tonal balance and low-frequency authority.
• Practical Audiophile Design – Adjustable floor spikes provide secure coupling on carpeted or solid floors, ensuring consistent speaker positioning and reliable performance in dedicated listening rooms or mixed-use spaces.
• Dimensions – 730 mm height with a top plate around 165 × 220 mm and a wide base for enhanced stability and correct tweeter ear-level alignment.
• Weight – Roughly 7 kg per stand, offering sufficient mass to control resonance while remaining manageable for installation and repositioning.
For Prices LoginNorstone Stylum 3 Speaker Stand
For Prices Login -
PLiXiR Elite BAC 3000 Conditioner with Audio Replas Socket
• PLiXiR Elite BAC 3000 Conditioner with Audio Replas Socket Overview – The PLiXiR Elite BAC 3000, released around 2016, is a balanced AC power conditioner engineered to deliver ultra-low-noise, stable power, further enhanced by the premium Audio Replas outlet for superior conductivity.
• Ultra-Low-Noise Balanced Power – Using a large toroidal balanced transformer and careful grounding topology, the Elite BAC 3000 reduces common-mode noise, improves micro-detail, and enhances dynamics across high-resolution audio systems.
• Audio Replas Socket Enhancement – The upgraded Audio Replas receptacle provides superior electrical contact, lower resistance, and improved power transfer, allowing the PLiXiR Elite BAC 3000 to unlock cleaner transients and more natural tonal texture.
• Stable High-Current Delivery – Capable of powering demanding amplifiers and source components, the Elite BAC 3000 maintains voltage stability under load, improving bass control, imaging precision, and overall system coherence.
• Dimensions – Approx. 430 mm (W) × 160 mm (H) × 360 mm (D), with a low-resonance chassis designed for vibration control and optimal placement within high-end audio racks.
• Weight – Roughly 28–30 kg, largely due to its massive balanced transformer and reinforced enclosure, ensuring mechanical stability and superior noise isolation.
For Prices Login -
YBA Integre Alpha Integrated Amplifier
• YBA Integre Alpha Integrated Amplifier Overview – The YBA Integre Alpha Integrated Amplifier, launched in the mid-1990s, is a Class AB solid-state design featuring high-quality analog inputs and YBA’s signature minimal-feedback topology for purity and musical realism.
• Refined French Engineering – The YBA Integre Alpha delivers exceptional tonal accuracy, wide soundstage depth, and a smooth, grain-free presentation, making it ideal for resolving speakers that benefit from organic musical flow and control.
• Musical Drive and Dynamics – With its robust power supply and precisely voiced circuitry, the YBA Integre Alpha offers fast transient response, excellent micro-detail retrieval, and stable current delivery for rhythmic, engaging playback.
• Low-Noise Analog Performance – The YBA Integre Alpha emphasizes ultra-low distortion and clean power delivery, ensuring black backgrounds, natural harmonic structure, and impressive dynamic contrast across both digital and analog sources.
• Dimensions – Approx. 430 mm (W) × 85 mm (H) × 300 mm (D), fitting easily into standard hi-fi racks while maintaining optimal ventilation for stable long-term performance.
• Weight – Roughly 10–12 kg, featuring a high-grade transformer and rigid chassis that help suppress vibration and enhance signal purity.
For Prices LoginYBA Integre Alpha Integrated Amplifier
For Prices Login -
NorStone ESSE HiFi Rack (4 Tier)
• NorStone ESSE HiFi Rack (4 Tier) – A high-quality hi-fi furniture solution built with gloss-black epoxy-lacquered steel and tempered glass shelves, offering clean aesthetics and functional support for serious audio systems.
• Audio-System Ready Construction – The rack’s design separates electronics across four levels, helping improve ventilation and reduce mechanical and electrical interference—ideal for high-fidelity audio setups.
• Dimensions & Shelf Capacity – External size of 570 mm (W) × 860 mm (H) × 400 mm (D) with shelf spacing of 222 mm; upper shelf rated at 20 kg, internal shelves 20 kg each, and bottom shelf 40 kg.
• Load Rating & Stability – Each glass shelf supports substantial weight (bottom shelf up to 40 kg) with a net rack weight ~23.3 kg, providing stable, vibration-resistant support for components.
For Prices LoginNorStone ESSE HiFi Rack (4 Tier)
For Prices Login
