-
Soulnote M3 Mono Amplifier
• Overview – The Soulnote M3 Mono Amplifier, released in 2019, is a solid state pure Class A monoblock design engineered with zero global feedback topology to deliver ultra-fast transient response and uncompromised musical transparency.
• Circuit Architecture – Built around Soulnote’s non-parallel push-pull output stage and discrete driver design, the amplifier emphasizes instantaneous current delivery, wide bandwidth, and exceptionally low phase distortion.
• Sonic Character – The Soulnote M3 Mono Amplifier is celebrated for explosive dynamics, deep tonal saturation, and expansive soundstage layering, making it ideal for high-resolution loudspeakers requiring precision and authority.
• Specifications – Pure Class A solid state topology, approximately 200W into 8Ω and 400W into 4Ω, wide frequency response beyond 20Hz–100kHz, extremely low distortion, and high current capability for difficult loads.
• Dimensions – Each chassis measures approximately 454 mm wide × 189 mm high × 430 mm deep, requiring generous ventilation to support continuous Class A thermal operation.
• Weight – Each monoblock weighs roughly 32 kg, reflecting oversized transformers, heavy aluminum construction, and substantial heat sinking for stable, long-term performance.
For Prices LoginSoulnote M3 Mono Amplifier
For Prices Login -
SoulNote A-2 Ver. 2 Integrated Amplifier
Soulnote A-2 v2
Soulnote A-2 v2 is a fully balanced, non NFB integrated amplifier designed to preserve timing, texture, and dynamic swing while offering flexible operating modes for real systems.
Design and engineering
The A-2 v2 carries Soulnote’s discrete, wide bandwidth gain architecture with a short signal path and mechanical tuning derived from the Series 3 program. Revisions to device selection, biasing, and grounding reduce stored energy and lower audible residue, yielding cleaner transients and a more stable image.
What changed from A-2 (previous version)
The v2 platform strengthens current delivery and simplifies the voltage gain loop for higher purity. The driver stage also uses the same TO3P transistor as the output stage. By passing a large current through the driver, it instantly compensates for HFE fluctuations caused by current changes in the output stage. This is the biggest difference and breakthrough from the prior version. The power amp mode now hard bypasses selector and volume control for those who prefer a separate preamp. Chassis and top cover treatment improve resonance control compared to the earlier A-2.
Connectivity and control
Balanced and single ended inputs are relay switched, with a balanced attenuator for consistent channel tracking. Four modes cover integrated stereo, bi amp mono, power amp stereo, and power amp bi amp. Control logic is isolated so audio circuits remain quiet during operation.
What distinguishes it
Fast, high current drive with a lively, uncompressed presentation and the flexibility to act as a true power amp when required.
Who it is for
Listeners who value natural timing, wide bandwidth clarity, and the option to reconfigure the amplifier as their system evolves.
In the box
Main unit, metal remote control, AC power cable, spike feet, documentation.
For Prices LoginSoulNote A-2 Ver. 2 Integrated Amplifier
For Prices Login -
SoulNote RSC Speaker Cables (3m)
• Product Overview – SoulNote RSC Speaker Cables (3m), released in the late-2010s, reflect SoulNote’s purist design philosophy, focusing on ultra-low loss signal transfer, mechanical resonance control, and natural musical expression.
• Cable Design Philosophy – Built using high-purity copper conductors and SoulNote’s resonance-controlled construction, these cables minimise stored energy and phase distortion, preserving timing accuracy, dynamics, and tonal neutrality across wideband loudspeakers.
• Sonic Performance – The SoulNote RSC Speaker Cables (3m) deliver fast transient response, clean bass articulation, and an open midrange, making them ideal for revealing high-resolution systems that prioritise realism and rhythmic coherence.
• Specifications – Low-resistance conductor geometry, carefully managed inductance and capacitance, non-magnetic materials throughout, and mechanically damped structure to reduce vibration-induced coloration and maintain consistent electrical characteristics.
• Dimensions – Each cable is supplied in a 3-metre length, offering practical reach for most floorstanding speaker placements while maintaining consistent impedance and signal integrity throughout the full run.
• Weight – Moderate overall mass reflecting solid conductor density and damping materials, designed to provide stability without placing excessive mechanical stress on amplifier or loudspeaker binding posts.
For Prices LoginSoulNote RSC Speaker Cables (3m)
For Prices Login -
SOULNOTE D-3 DAC
• Overview – SOULNOTE D-3 DAC, released in 2020, is a reference-class digital-to-analog converter designed with SoulNote’s zero-feedback architecture to deliver highly accurate, ultra-low distortion conversion and musical transparency.
• Digital Architecture – Utilising discrete analogue filter stages and precision clocking, the D-3 DAC preserves timing integrity and dynamic expression, providing outstanding resolution and spatial coherence from PCM and DSD sources.
• Sound Quality – The SOULNOTE D-3 DAC is prized for its natural midrange clarity, refined treble extension, and low noise floor, allowing connected preamplifiers and amplifiers to reveal deeper musical nuance across genres.
For Prices LoginSOULNOTE D-3 DAC
For Prices Login -
SOULNOTE A-3 Reference Integrated Amplifier
• Overview – SOULNOTE A-3 Reference Integrated Amplifier, released in 2021, is a solid-state Class AB integrated design without DAC or phono, engineered for ultimate signal purity and unrestricted current delivery.
• Circuit Philosophy – Built around SoulNote’s zero-feedback, non-parallel architecture, the amplifier prioritises instantaneous current response, wide bandwidth, and natural harmonic flow, appealing strongly to purist audiophiles.
• Sonic Character – SOULNOTE A-3 Reference Integrated Amplifier delivers exceptional dynamic contrast, dense tonal colour, and expansive soundstage depth, excelling with difficult loudspeaker loads and revealing high-resolution source components.
• Specifications – Rated at approximately 120 W per channel into 8 ohms and 240 W into 4 ohms, with ultra-high current capability, wide frequency response, and discrete output devices optimised for low impedance control.
For Prices LoginSOULNOTE A-3 Reference Integrated Amplifier
For Prices Login -
SoulNote A-1 Ver. 2 Integrated Amplifier
• Product Overview – SoulNote A-1 Ver. 2 Integrated Amplifier, released in 2022, is a solid-state Class AB integrated amplifier using Soulnote’s zero-feedback philosophy, delivering exceptional speed, transparency, and natural musical flow.
• Circuit Architecture – Designed with fully discrete, non-NFB circuitry and simplified signal paths, the amplifier prioritises phase accuracy, micro-dynamic resolution, and tonal purity, appealing to listeners seeking uncoloured, high-resolution playback.
• Sound Performance – The SoulNote A-1 Ver. 2 Integrated Amplifier offers agile bass control, vivid midrange articulation, and extended treble clarity, pairing effortlessly with revealing loudspeakers and high-quality digital or analog sources.
• Specifications – Output power is approximately 80 W per channel into 8 ohms and 160 W into 4 ohms, featuring wide bandwidth, high current delivery, and a robust linear power supply.
• Dimensions – Approximate chassis dimensions are 454 mm (W) × 179 mm (H) × 407 mm (D), housed in a resonance-controlled aluminium enclosure optimised for electrical stability and thermal management.
• Weight – The unit weighs approximately 24 kg, reflecting its substantial transformer, high-capacity power supply components, and rigid mechanical construction designed to minimise vibration and noise.
For Prices LoginSoulNote A-1 Ver. 2 Integrated Amplifier
For Prices Login -
NBS Omega IV Speaker Cable (2.8m)
• Product Overview – NBS Omega IV Speaker Cable, released in the early 2010s, is a flagship reference speaker cable designed to maximize signal purity, dynamic realism, and tonal density in ultra-high-end audio systems.
• Conductor & Dielectric Design – Utilizing NBS’s proprietary rectangular solid-core conductors and advanced dielectric materials, the cable minimizes skin effect, phase distortion, and energy storage for superior coherence and musical flow.
• Sonic Performance – NBS Omega IV Speaker Cable delivers exceptional soundstage scale, explosive dynamics, and profound low-frequency authority while preserving microdetail, harmonic richness, and natural timbre across complex recordings.
• Specifications – Ultra-low resistance and inductance geometry, heavy-gauge multi-conductor architecture, high-current capability, and precision-terminated spades or bananas optimized for reference amplifiers and full-range loudspeakers.
• Dimensions – Available in various custom lengths, typically supplied in 2.0–3.0 meter stereo pairs, with substantial cable diameter reflecting its complex internal conductor and shielding structure.
• Weight – Approximately 4–5 kg per stereo pair depending on length, indicating massive conductor mass, dense dielectric layering, and mechanically damped outer jackets.
For Prices LoginNBS Omega IV Speaker Cable (2.8m)
For Prices Login -
Linn Kandid Moving Coil Cartridge
• Product Overview – The Linn Kandid Moving Coil Cartridge, introduced in 2012, employs a nude micro-ridge stylus and optimized body geometry to achieve exceptional tracking accuracy, revealing fine musical detail with remarkable transparency.
• Advanced Motor System – Its low-mass boron cantilever and precision coil assembly deliver rapid transient response, low distortion, and superior retrieval of micro-information, making the Kandid a reference choice for high-end vinyl playback.
• Synergy & Compatibility – Designed primarily for Linn Ekos SE tonearms and Klimax LP12 systems, the Kandid ensures ideal mechanical alignment and resonance control, maximizing performance in well-matched analog front ends.
• Construction Quality – The rigid machined housing and open-body design reduce unwanted resonances and standing waves, providing cleaner frequency extension and more accurate tonal reproduction across the audible spectrum.
• Dimensions – Linn Kandid Moving Coil Cartridge is Approx. 18 mm (W) × 17 mm (H) × 18 mm (D), compact and lightweight for optimal cartridge-tonearm integration and fine-tuning adjustability.
• Weight – Around 7 grams, ensuring compatibility with medium-mass tonearms and enabling precise VTF and azimuth calibration.
For Prices LoginLinn Kandid Moving Coil Cartridge
For Prices Login -
Linn Uphorik Phono
• Linn Uphorik Phono Overview – The Linn Uphorik Phono, released in 2010, is a fully balanced, solid-state phono stage with extensive MM/MC loading options, delivering precision analogue gain for high-resolution vinyl playback in Linn and non-Linn systems.
• Flexible Gain & Loading – Offers wide configurability for moving magnet and moving coil cartridges, with adjustable gain, impedance, and capacitance settings that ensure optimal cartridge matching and highly accurate tonal balance.
• Balanced & Single-Ended Outputs – Provides XLR and RCA outputs for system compatibility, with a dual-mono layout that lowers noise and improves channel separation, enhancing detail retrieval and spatial accuracy.
• Studio-Grade Signal Purity – Uses premium components, short signal paths, and a discrete analog architecture to minimize distortion, ensuring the Linn Uphorik Phono maintains clarity, speed, and musical flow across demanding vinyl recordings.
• Dimensions – Approx. 350 mm (W) × 80 mm (H) × 350 mm (D), suited for standard hi-fi racks and optimized for vibration-free placement in vinyl-focused systems.
• Weight – Roughly 5 kg, with a rigid chassis that helps stabilize internal circuitry and reduce microphonic interference for enhanced phono performance.
For Prices LoginLinn Uphorik Phono
For Prices Login -
Linn Majik DS-i
• Integrated Streaming Amplifier – The Linn Majik DS-i is a Class D solid-state integrated amplifier with a built-in network streamer, delivering clean, efficient power and rich musical performance through Linn’s renowned DS streaming platform.
• Klimax-Inspired Digital Architecture – The Linn Majik DS-i incorporates advanced DAC circuitry and low-jitter clocking, offering detailed, pitch-accurate playback and excellent timing precision across high-resolution network-streamed music.
• Versatile System Connectivity – With Ethernet streaming, analogue inputs, and pre-outs, the Linn Majik DS-i integrates seamlessly with Linn systems and third-party components, providing flexible expansion and reliable everyday usability.
• Room-Optimised Performance – Compatible with Linn’s Space Optimisation, the Linn Majik DS-i adapts playback to your room’s acoustics, improving bass control, imaging, and overall musical coherence without requiring physical speaker changes.
• Dimensions – Approx. 381 mm (W) × 355 mm (D) × 80 mm (H). Compact chassis designed for discreet placement in modern hi-fi racks and living spaces.
• Weight – Approximately 4.5 kg, offering a lightweight yet rigid construction that supports low-noise operation and stable amplifier performance.
For Prices LoginLinn Majik DS-i
For Prices Login -
Gato Audio PWR 222 Monoblock
• Gato Audio PWR 222 Monoblock – This high-current Class D monoblock delivers exceptional control, transparency, and effortless dynamic power, offering a refined yet authoritative presentation ideal for modern high-resolution loudspeaker systems.
• Advanced Class D Output Stage – The PWR 222 uses a custom-tuned Class D topology with ultra-low distortion, wide bandwidth, and exceptional efficiency, producing a clean, fast, and highly detailed sonic signature.
• Massive Power & Stability – Gato Audio PWR 222 Monoblock delivers 250W into 8Ω and 500W into 4Ω, the PWR 222 maintains absolute grip over demanding speakers, ensuring deep dynamics, precise bass, and confident transient handling.
• Elegant Danish Engineering – Featuring Gato’s signature curved chassis, oversized toroidal supply, and precision electronics, the PWR 222 combines striking aesthetics with exceptionally stable and musical performance.
• Dimensions – Approx. 325 mm (W) × 325 mm (D) × 105 mm (H). Designed for efficient cooling and elegant placement in modern high-end audio racks.
• Weight – Approximately 10 kg per monoblock, providing solid mechanical stability and reduced resonance for improved electronic performance and noise control.
For Prices LoginGato Audio PWR 222 Monoblock
For Prices Login -
Linn LP12 with EKOS Tonearm and Naim Armageddon Power Supply
• Linn LP12 with EKOS Tonearm and Naim Armageddon Power Supply – A legendary analog turntable system that blends Linn’s precision-engineered suspended sub-chassis design with Naim’s ultra-stable power supply for lifelike musical timing and tonal purity.
• Reference-Grade Analog Performance – The Linn LP12 with EKOS Tonearm and Naim Armageddon Power Supply achieves exceptionally low noise and speed stability, revealing micro-detail and rhythmic accuracy that define world-class vinyl playback.
• EKOS Tonearm Precision – Crafted from high-rigidity alloys and featuring ultra-low-friction bearings, the EKOS tonearm ensures superior tracking accuracy, channel balance, and low coloration across demanding cartridges.
• Naim Armageddon Power Supply Integration – Utilizing a 430VA isolation transformer and simple two-wire output, it delivers clean, regulated AC to the LP12 motor for enhanced speed consistency and lowered electrical noise.
• Product Dimensions – The LP12 chassis measures approximately 445 mm (W) × 356 mm (D) × 140 mm (H), providing a compact yet acoustically optimized platform for high-end analog systems.
• Weight – Total system weight (including power supply and tonearm) is approximately 16 kg, ensuring excellent mechanical stability and vibration isolation for consistent sonic performance.
For Prices Login -
-
Linn Majik 140 Speakers
• Floorstanding Speaker Overview – The Linn Majik 140 Speakers deliver a refined four-way design with exceptional timing, open mids and articulate bass, offering a highly musical and rhythmically engaging performance for modern Linn-based systems.
• Driver System & Acoustic Behaviour – Using Linn’s 2K tweeter array and custom mid/bass drivers, the design provides wide dispersion, smooth integration and detailed treble clarity, with one mention of Linn Majik 140 Speakers enhancing overall coherence.
• Four-Way Precision Engineering – The extended low-frequency system delivers deep, controlled bass with excellent agility, while the dedicated midrange driver ensures natural vocals and stable imaging across diverse musical genres, plus one additional mention of Linn Majik 140 Speakers.
• Upgrade Path & System Flexibility – Fully compatible with Linn Aktiv and Exakt upgrades, the speaker supports advanced digital crossover optimisation, offering scalable performance improvements for both passive and active configurations.
• Product Dimensions – Each cabinet measures approximately 1000 mm (H) × 194 mm (W) × 300 mm (D), providing a slim, room-friendly profile suitable for medium to large listening spaces.
• Product Weight – Weighing around 21 kg per speaker, the rigid enclosure and internal bracing enhance structural stability, reduce unwanted resonance and improve clarity across the full frequency range.
For Prices LoginLinn Majik 140 Speakers
For Prices Login
