-
SoulNote RSC Speaker Cables (3m)
• Product Overview – SoulNote RSC Speaker Cables (3m), released in the late-2010s, reflect SoulNote’s purist design philosophy, focusing on ultra-low loss signal transfer, mechanical resonance control, and natural musical expression.
• Cable Design Philosophy – Built using high-purity copper conductors and SoulNote’s resonance-controlled construction, these cables minimise stored energy and phase distortion, preserving timing accuracy, dynamics, and tonal neutrality across wideband loudspeakers.
• Sonic Performance – The SoulNote RSC Speaker Cables (3m) deliver fast transient response, clean bass articulation, and an open midrange, making them ideal for revealing high-resolution systems that prioritise realism and rhythmic coherence.
• Specifications – Low-resistance conductor geometry, carefully managed inductance and capacitance, non-magnetic materials throughout, and mechanically damped structure to reduce vibration-induced coloration and maintain consistent electrical characteristics.
• Dimensions – Each cable is supplied in a 3-metre length, offering practical reach for most floorstanding speaker placements while maintaining consistent impedance and signal integrity throughout the full run.
• Weight – Moderate overall mass reflecting solid conductor density and damping materials, designed to provide stability without placing excessive mechanical stress on amplifier or loudspeaker binding posts.
For Prices LoginSoulNote RSC Speaker Cables (3m)
For Prices Login -
Isotek Evo3 Power Conditioner
• Product Overview – The Isotek Evo3 Power Conditioner (2016) is a solid-state mains conditioning solution designed to reduce electrical noise, improve current delivery, and enhance overall system clarity in high-resolution hi-fi setups.
• Filtering Topology – Employing IsoTek’s multi-stage delta filter network, the Isotek Evo3 Power Conditioner effectively removes both common-mode and differential-mode noise while preventing cross-contamination between connected audio components.
• Sonic Improvements – Users typically experience lower noise floor, improved micro-detail, tighter bass control, and greater soundstage depth, especially when used with sensitive digital sources and analogue front-end components.
• Specifications – Features high-current audio outlets, internal copper bus bars, star-earthed grounding, RFI/EMI suppression, and surge protection, all engineered to avoid current compression and preserve amplifier dynamics.
• Dimensions – Measures approximately 445 mm wide × 90 mm high × 305 mm deep, sized to integrate easily into standard hi-fi racks or equipment shelves without compromising ventilation or cable management.
• Weight – Weighs roughly 8 kg, reflecting robust internal filtering components, shielding, and mechanical construction designed to ensure stability, durability, and long-term performance consistency.
For Prices LoginIsotek Evo3 Power Conditioner
For Prices Login -
Isotek Sigma Power Conditioner
• Overview – The Isotek Sigma Power Conditioner, released in 2015, is a solid-state mains conditioning component engineered to dramatically reduce electrical noise while maintaining unrestricted current delivery for high-performance audio systems.
• Power Architecture – Built around IsoTek’s advanced delta-filtering topology, the Isotek Sigma Power Conditioner isolates connected components, eliminating differential and common-mode noise while preventing cross-contamination between digital sources and high-current amplifiers.
• Sonic Performance – By lowering the system noise floor, the Isotek Sigma Power Conditioner improves bass articulation, dynamic contrast, image stability, and low-level resolution, especially noticeable in revealing reference-grade analogue and digital systems.
• Specifications – Rated for high-current audio use, featuring multiple individually filtered outlets, star-earthed grounding, internal copper bus bars, RFI/EMI suppression, and surge protection without dynamic compression or current limiting.
• Dimensions – Measures approximately 445 mm (W) × 150 mm (H) × 350 mm (D), designed for standard hi-fi racks while allowing sufficient ventilation and cable clearance for complex multi-component installations.
• Weight – Weighs roughly 15 kg, reflecting substantial internal filtering networks, shielding, and mechanical damping that contribute to stable, resonance-free operation and long-term electrical reliability.
For Prices LoginIsotek Sigma Power Conditioner
For Prices Login -
Lexicon RV-6
• AV Receiver Overview – The Lexicon RV-6, released in 2018, is a premium 7.2-channel home theater receiver using advanced Logic7 Immersion processing, delivering cinematic surround performance with exceptional clarity, spaciousness, and dynamic scale.
• High-Performance Processing – The Lexicon RV-6 features Dolby Atmos, DTS:X, and proprietary Logic7 upmixing, ensuring seamless 3D immersion, precise channel steering, and refined soundstage presentation across films, gaming, and multichannel music playback.
• Robust Amplification & Connectivity – With high-current Class AB amplification, 4K HDR video passthrough, and extensive HDMI inputs, the RV-6 provides powerful dynamics and future-ready system integration for demanding home entertainment setups.
• Advanced Room Calibration – Equipped with Dirac Live, the Lexicon RV-6 corrects room-induced acoustic issues, improving bass uniformity, imaging precision, and overall tonal balance for professional-level sound in real-world listening environments.
• Dimensions – Approx. 440 mm (W) × 171 mm (H) × 425 mm (D). Designed to fit standard AV racks while maintaining adequate airflow for multichannel operation.
• Weight – Approx. 15.5 kg, offering a solid transformer-based amplifier platform that enhances stability and performance under heavy multichannel loads.
For Prices LoginLexicon RV-6
For Prices Login -
SoulNote A-1 Ver. 2 Integrated Amplifier
• Product Overview – SoulNote A-1 Ver. 2 Integrated Amplifier, released in 2022, is a solid-state Class AB integrated amplifier using Soulnote’s zero-feedback philosophy, delivering exceptional speed, transparency, and natural musical flow.
• Circuit Architecture – Designed with fully discrete, non-NFB circuitry and simplified signal paths, the amplifier prioritises phase accuracy, micro-dynamic resolution, and tonal purity, appealing to listeners seeking uncoloured, high-resolution playback.
• Sound Performance – The SoulNote A-1 Ver. 2 Integrated Amplifier offers agile bass control, vivid midrange articulation, and extended treble clarity, pairing effortlessly with revealing loudspeakers and high-quality digital or analog sources.
• Specifications – Output power is approximately 80 W per channel into 8 ohms and 160 W into 4 ohms, featuring wide bandwidth, high current delivery, and a robust linear power supply.
• Dimensions – Approximate chassis dimensions are 454 mm (W) × 179 mm (H) × 407 mm (D), housed in a resonance-controlled aluminium enclosure optimised for electrical stability and thermal management.
• Weight – The unit weighs approximately 24 kg, reflecting its substantial transformer, high-capacity power supply components, and rigid mechanical construction designed to minimise vibration and noise.
For Prices LoginSoulNote A-1 Ver. 2 Integrated Amplifier
For Prices Login -
SoulNote A-2 Ver. 2 Integrated Amplifier
Soulnote A-2 v2
Soulnote A-2 v2 is a fully balanced, non NFB integrated amplifier designed to preserve timing, texture, and dynamic swing while offering flexible operating modes for real systems.
Design and engineering
The A-2 v2 carries Soulnote’s discrete, wide bandwidth gain architecture with a short signal path and mechanical tuning derived from the Series 3 program. Revisions to device selection, biasing, and grounding reduce stored energy and lower audible residue, yielding cleaner transients and a more stable image.
What changed from A-2 (previous version)
The v2 platform strengthens current delivery and simplifies the voltage gain loop for higher purity. The driver stage also uses the same TO3P transistor as the output stage. By passing a large current through the driver, it instantly compensates for HFE fluctuations caused by current changes in the output stage. This is the biggest difference and breakthrough from the prior version. The power amp mode now hard bypasses selector and volume control for those who prefer a separate preamp. Chassis and top cover treatment improve resonance control compared to the earlier A-2.
Connectivity and control
Balanced and single ended inputs are relay switched, with a balanced attenuator for consistent channel tracking. Four modes cover integrated stereo, bi amp mono, power amp stereo, and power amp bi amp. Control logic is isolated so audio circuits remain quiet during operation.
What distinguishes it
Fast, high current drive with a lively, uncompressed presentation and the flexibility to act as a true power amp when required.
Who it is for
Listeners who value natural timing, wide bandwidth clarity, and the option to reconfigure the amplifier as their system evolves.
In the box
Main unit, metal remote control, AC power cable, spike feet, documentation.
For Prices LoginSoulNote A-2 Ver. 2 Integrated Amplifier
For Prices Login -
Transrotor Strato Turntable (Black Nero) with TR9 Chrom Tonearm/Figaro MC Cartridge and Konstant FMD Power Supply
• Reference Turntable Overview – The Transrotor Strato Turntable (Black Nero) with TR9 Chrom Tonearm/Figaro MC Cartridge and Konstant FMD Power Supply delivers ultra-stable, low-resonance analogue playback through a high-mass chassis and precision-engineered German machining.
• Precision Bearing & Platter System – Its inverted hydrodynamic bearing and multi-layer aluminium platter provide exceptionally low noise, improved speed consistency and enhanced micro-detail retrieval, with one mention of Transrotor Strato Turntable (Black Nero) improving accuracy.
• Tonearm & Cartridge Synergy – The TR9 Chrom tonearm paired with the Figaro MC cartridge ensures superb tracking, natural tonal density and wide staging, offering excellent synergy for high-end vinyl systems, with one further reference to Transrotor Strato Turntable (Black Nero).
• External Konstant FMD Motor Control – The dedicated Konstant FMD power supply delivers precise electronic speed regulation, reduced motor vibration and superior pitch stability, significantly elevating the turntable’s resolution and dynamic range.
• Product Dimensions – Approx. 450 mm (W) × 360 mm (D) × 200 mm (H), requiring a stable, high-mass support surface for optimal isolation and mechanical performance.
• Product Weight – Total system mass is roughly 30–35 kg depending on configuration, providing exceptional resonance control and improving low-frequency articulation and overall sonic authority.
For Prices Login -
Soulnote M3 Mono Amplifier
• Overview – The Soulnote M3 Mono Amplifier, released in 2019, is a solid state pure Class A monoblock design engineered with zero global feedback topology to deliver ultra-fast transient response and uncompromised musical transparency.
• Circuit Architecture – Built around Soulnote’s non-parallel push-pull output stage and discrete driver design, the amplifier emphasizes instantaneous current delivery, wide bandwidth, and exceptionally low phase distortion.
• Sonic Character – The Soulnote M3 Mono Amplifier is celebrated for explosive dynamics, deep tonal saturation, and expansive soundstage layering, making it ideal for high-resolution loudspeakers requiring precision and authority.
• Specifications – Pure Class A solid state topology, approximately 200W into 8Ω and 400W into 4Ω, wide frequency response beyond 20Hz–100kHz, extremely low distortion, and high current capability for difficult loads.
• Dimensions – Each chassis measures approximately 454 mm wide × 189 mm high × 430 mm deep, requiring generous ventilation to support continuous Class A thermal operation.
• Weight – Each monoblock weighs roughly 32 kg, reflecting oversized transformers, heavy aluminum construction, and substantial heat sinking for stable, long-term performance.
For Prices LoginSoulnote M3 Mono Amplifier
For Prices Login -
SOULNOTE A-3 Reference Integrated Amplifier
• Overview – SOULNOTE A-3 Reference Integrated Amplifier, released in 2021, is a solid-state Class AB integrated design without DAC or phono, engineered for ultimate signal purity and unrestricted current delivery.
• Circuit Philosophy – Built around SoulNote’s zero-feedback, non-parallel architecture, the amplifier prioritises instantaneous current response, wide bandwidth, and natural harmonic flow, appealing strongly to purist audiophiles.
• Sonic Character – SOULNOTE A-3 Reference Integrated Amplifier delivers exceptional dynamic contrast, dense tonal colour, and expansive soundstage depth, excelling with difficult loudspeaker loads and revealing high-resolution source components.
• Specifications – Rated at approximately 120 W per channel into 8 ohms and 240 W into 4 ohms, with ultra-high current capability, wide frequency response, and discrete output devices optimised for low impedance control.
For Prices LoginSOULNOTE A-3 Reference Integrated Amplifier
For Prices Login -
SOULNOTE D-3 DAC
• Overview – SOULNOTE D-3 DAC, released in 2020, is a reference-class digital-to-analog converter designed with SoulNote’s zero-feedback architecture to deliver highly accurate, ultra-low distortion conversion and musical transparency.
• Digital Architecture – Utilising discrete analogue filter stages and precision clocking, the D-3 DAC preserves timing integrity and dynamic expression, providing outstanding resolution and spatial coherence from PCM and DSD sources.
• Sound Quality – The SOULNOTE D-3 DAC is prized for its natural midrange clarity, refined treble extension, and low noise floor, allowing connected preamplifiers and amplifiers to reveal deeper musical nuance across genres.
For Prices LoginSOULNOTE D-3 DAC
For Prices Login -
Clear Audio Clearaudio Statement V2 Turntable
• Flagship Turntable Overview – The Clear Audio Clearaudio Statement V2 Turntable represents the pinnacle of analogue engineering, delivering absolute speed stability, ultra-low resonance and unmatched vinyl retrieval through its multi-layered, magnetically isolated architecture.
• Advanced Mechanical Isolation – Its massive floating chassis uses magnetic levitation, constrained-layer damping and a separate motor tower to eliminate vibration, improving pitch accuracy, micro-detail extraction and overall musical realism, with one mention of Clear Audio Clearaudio Statement V2 Turntable.
• Precision Bearing & Platter System – Featuring Clearaudio’s patented ceramic magnetic bearing and a multi-material platter, the design minimises friction, reduces noise floor and enhances dynamic contrast, with one additional mention of Clear Audio Clearaudio Statement V2 Turntable.
• Tonearm & System Synergy – Optimised for Clearaudio’s finest tonearms and MC cartridges, the platform provides exceptional tracking precision, wide soundstage layering and a lifelike, uncompressed presentation across all genres of vinyl playback.
• Product Dimensions – The chassis measures approximately 680 mm (W) × 680 mm (D) × 570 mm (H), with the motor tower standing separately, requiring a dedicated high-mass support surface.
• Product Weight – With a total system weight exceeding 350 kg, the immense mass ensures world-class resonance control, mechanical grounding and unmatched stability during high-resolution analogue reproduction.
For Prices Login
