-
Soulnote M3 Mono Amplifier
• Overview – The Soulnote M3 Mono Amplifier, released in 2019, is a solid state pure Class A monoblock design engineered with zero global feedback topology to deliver ultra-fast transient response and uncompromised musical transparency.
• Circuit Architecture – Built around Soulnote’s non-parallel push-pull output stage and discrete driver design, the amplifier emphasizes instantaneous current delivery, wide bandwidth, and exceptionally low phase distortion.
• Sonic Character – The Soulnote M3 Mono Amplifier is celebrated for explosive dynamics, deep tonal saturation, and expansive soundstage layering, making it ideal for high-resolution loudspeakers requiring precision and authority.
• Specifications – Pure Class A solid state topology, approximately 200W into 8Ω and 400W into 4Ω, wide frequency response beyond 20Hz–100kHz, extremely low distortion, and high current capability for difficult loads.
• Dimensions – Each chassis measures approximately 454 mm wide × 189 mm high × 430 mm deep, requiring generous ventilation to support continuous Class A thermal operation.
• Weight – Each monoblock weighs roughly 32 kg, reflecting oversized transformers, heavy aluminum construction, and substantial heat sinking for stable, long-term performance.
For Prices LoginSoulnote M3 Mono Amplifier
For Prices Login -
SoulNote A-2 Ver. 2 Integrated Amplifier
Soulnote A-2 v2
Soulnote A-2 v2 is a fully balanced, non NFB integrated amplifier designed to preserve timing, texture, and dynamic swing while offering flexible operating modes for real systems.
Design and engineering
The A-2 v2 carries Soulnote’s discrete, wide bandwidth gain architecture with a short signal path and mechanical tuning derived from the Series 3 program. Revisions to device selection, biasing, and grounding reduce stored energy and lower audible residue, yielding cleaner transients and a more stable image.
What changed from A-2 (previous version)
The v2 platform strengthens current delivery and simplifies the voltage gain loop for higher purity. The driver stage also uses the same TO3P transistor as the output stage. By passing a large current through the driver, it instantly compensates for HFE fluctuations caused by current changes in the output stage. This is the biggest difference and breakthrough from the prior version. The power amp mode now hard bypasses selector and volume control for those who prefer a separate preamp. Chassis and top cover treatment improve resonance control compared to the earlier A-2.
Connectivity and control
Balanced and single ended inputs are relay switched, with a balanced attenuator for consistent channel tracking. Four modes cover integrated stereo, bi amp mono, power amp stereo, and power amp bi amp. Control logic is isolated so audio circuits remain quiet during operation.
What distinguishes it
Fast, high current drive with a lively, uncompressed presentation and the flexibility to act as a true power amp when required.
Who it is for
Listeners who value natural timing, wide bandwidth clarity, and the option to reconfigure the amplifier as their system evolves.
In the box
Main unit, metal remote control, AC power cable, spike feet, documentation.
For Prices LoginSoulNote A-2 Ver. 2 Integrated Amplifier
For Prices Login -
SoulNote RSC Speaker Cables (3m)
• Product Overview – SoulNote RSC Speaker Cables (3m), released in the late-2010s, reflect SoulNote’s purist design philosophy, focusing on ultra-low loss signal transfer, mechanical resonance control, and natural musical expression.
• Cable Design Philosophy – Built using high-purity copper conductors and SoulNote’s resonance-controlled construction, these cables minimise stored energy and phase distortion, preserving timing accuracy, dynamics, and tonal neutrality across wideband loudspeakers.
• Sonic Performance – The SoulNote RSC Speaker Cables (3m) deliver fast transient response, clean bass articulation, and an open midrange, making them ideal for revealing high-resolution systems that prioritise realism and rhythmic coherence.
• Specifications – Low-resistance conductor geometry, carefully managed inductance and capacitance, non-magnetic materials throughout, and mechanically damped structure to reduce vibration-induced coloration and maintain consistent electrical characteristics.
• Dimensions – Each cable is supplied in a 3-metre length, offering practical reach for most floorstanding speaker placements while maintaining consistent impedance and signal integrity throughout the full run.
• Weight – Moderate overall mass reflecting solid conductor density and damping materials, designed to provide stability without placing excessive mechanical stress on amplifier or loudspeaker binding posts.
For Prices LoginSoulNote RSC Speaker Cables (3m)
For Prices Login -
Apogee Stage Speakers
• Product Overview – The Apogee Stage Speakers, released circa 1990, are full-range planar ribbon loudspeakers designed for high-resolution, low-distortion playback, delivering the open, fast transient response Apogee is renowned for.
• Ribbon Loudspeaker Performance – Featuring true ribbon midrange and tweeter elements, these speakers deliver lightning-fast transients, exceptional clarity, and expansive soundstaging that rewards high-quality amplification and careful system matching.
• Design & Sonic Character – The Apogee Stage Speakers use a dipole radiation pattern with large ribbon surfaces, producing natural tonal balance, deep image layering, and lifelike vocal reproduction unmatched by conventional dynamic driver designs.
• Specifications – Nominal impedance is approximately 3–4 ohms with sensitivity around 86 dB, requiring high-current amplifiers capable of stable low-impedance drive to unlock their full dynamic and tonal potential.
• Dimensions – Each speaker measures approximately 1220 mm (H) × 560 mm (W) × 60 mm (D), with a slim vertical profile that still demands adequate floor space and thoughtful room placement.
• Weight – Each speaker weighs roughly 32 kg, reflecting the substantial ribbon assemblies, rigid frame construction, and damping required for mechanical stability and accurate ribbon driver operation.
For Prices LoginApogee Stage Speakers
For Prices Login -
SOULNOTE D-3 DAC
• Overview – SOULNOTE D-3 DAC, released in 2020, is a reference-class digital-to-analog converter designed with SoulNote’s zero-feedback architecture to deliver highly accurate, ultra-low distortion conversion and musical transparency.
• Digital Architecture – Utilising discrete analogue filter stages and precision clocking, the D-3 DAC preserves timing integrity and dynamic expression, providing outstanding resolution and spatial coherence from PCM and DSD sources.
• Sound Quality – The SOULNOTE D-3 DAC is prized for its natural midrange clarity, refined treble extension, and low noise floor, allowing connected preamplifiers and amplifiers to reveal deeper musical nuance across genres.
For Prices LoginSOULNOTE D-3 DAC
For Prices Login -
SOULNOTE A-3 Reference Integrated Amplifier
• Overview – SOULNOTE A-3 Reference Integrated Amplifier, released in 2021, is a solid-state Class AB integrated design without DAC or phono, engineered for ultimate signal purity and unrestricted current delivery.
• Circuit Philosophy – Built around SoulNote’s zero-feedback, non-parallel architecture, the amplifier prioritises instantaneous current response, wide bandwidth, and natural harmonic flow, appealing strongly to purist audiophiles.
• Sonic Character – SOULNOTE A-3 Reference Integrated Amplifier delivers exceptional dynamic contrast, dense tonal colour, and expansive soundstage depth, excelling with difficult loudspeaker loads and revealing high-resolution source components.
• Specifications – Rated at approximately 120 W per channel into 8 ohms and 240 W into 4 ohms, with ultra-high current capability, wide frequency response, and discrete output devices optimised for low impedance control.
For Prices LoginSOULNOTE A-3 Reference Integrated Amplifier
For Prices Login -
SoulNote A-1 Ver. 2 Integrated Amplifier
• Product Overview – SoulNote A-1 Ver. 2 Integrated Amplifier, released in 2022, is a solid-state Class AB integrated amplifier using Soulnote’s zero-feedback philosophy, delivering exceptional speed, transparency, and natural musical flow.
• Circuit Architecture – Designed with fully discrete, non-NFB circuitry and simplified signal paths, the amplifier prioritises phase accuracy, micro-dynamic resolution, and tonal purity, appealing to listeners seeking uncoloured, high-resolution playback.
• Sound Performance – The SoulNote A-1 Ver. 2 Integrated Amplifier offers agile bass control, vivid midrange articulation, and extended treble clarity, pairing effortlessly with revealing loudspeakers and high-quality digital or analog sources.
• Specifications – Output power is approximately 80 W per channel into 8 ohms and 160 W into 4 ohms, featuring wide bandwidth, high current delivery, and a robust linear power supply.
• Dimensions – Approximate chassis dimensions are 454 mm (W) × 179 mm (H) × 407 mm (D), housed in a resonance-controlled aluminium enclosure optimised for electrical stability and thermal management.
• Weight – The unit weighs approximately 24 kg, reflecting its substantial transformer, high-capacity power supply components, and rigid mechanical construction designed to minimise vibration and noise.
For Prices LoginSoulNote A-1 Ver. 2 Integrated Amplifier
For Prices Login -
Kimber Kables 4TC Speaker Cables (3.1m)
• High-Purity Cable Design – Kimber Kables 4TC Speaker Cables (3.1m) use Kimber’s classic braided geometry, offering exceptional noise rejection, improved conductivity, and transparent signal transfer for clean, natural, and highly detailed musical playback.
• Eight-Conductor Architecture – The Kimber Kables 4TC Speaker Cables (3.1m) feature four blue and four black Teflon-insulated conductors, delivering excellent phase coherence, low capacitance, and smooth frequency balance across demanding loudspeaker systems.
• Superior Tonal Neutrality – These cables provide balanced bass control, open midrange presence, and refined treble extension, making them ideal for systems requiring neutrality, improved imaging, and enhanced microdynamic resolution.
• System Compatibility – The Kimber Kables 4TC Speaker Cables pair well with tube and solid-state amplifiers, offering stable performance and flexible termination options for a wide range of high-quality loudspeakers.
• Dimensions – Typical length 2–3 meters depending on configuration, featuring Kimber’s signature hand-braided construction designed for consistent electrical performance and reduced electromagnetic interference.
• Weight – Lightweight yet robust, approximately 0.4–0.6 kg per stereo pair depending on length, ensuring easy routing, optimal flexibility, and long-term durability.
For Prices LoginKimber Kables 4TC Speaker Cables (3.1m)
For Prices Login
