-
TAD Compact Reference CR1
• Overview – TAD Compact Reference CR1, released in 2011, is a high-end standmount loudspeaker engineered to deliver reference-level neutrality, precision imaging, and studio-grade accuracy derived from TAD’s professional monitor heritage.
• Driver Technology – Featuring TAD’s proprietary concentric CST driver with beryllium tweeter and magnesium midrange, it achieves point-source coherence, exceptional phase alignment, and ultra-low distortion across the audible frequency range.
• Sonic Performance – TAD Compact Reference CR1 is celebrated for its transparency, holographic soundstage, and tonal realism, excelling with acoustic, orchestral, and complex recordings where timing and micro-detail are critical.
• Specifications – Two-way bass-reflex design, nominal 4-ohm impedance, sensitivity approx. 87 dB, frequency response roughly 45 Hz–100 kHz, rear-firing port, and high-quality crossover components optimized for minimal signal loss.
• Dimensions – Approx. 410 mm (H) × 250 mm (W) × 360 mm (D), offering a substantial standmount form factor designed for rigid placement on dedicated speaker stands in reference listening environments.
• Weight – Approximately 18 kg per speaker, reflecting dense cabinet construction, internal bracing, and premium driver assemblies required for resonance control and uncompromised acoustic performance.
For Prices LoginTAD Compact Reference CR1
For Prices Login -
TAD Evolution One TX
• Product Overview – The TAD Evolution One TX (2016) is a high-end floorstanding loudspeaker engineered in Japan, combining studio-grade accuracy with refined musicality for reference-level two-channel listening environments.
• Driver Technology – Utilizing TAD’s Coherent Source Transducer with beryllium tweeter and midrange diaphragm, the TAD Evolution One TX delivers exceptional phase coherence, pinpoint imaging, and ultra-low distortion across the audible spectrum.
• Cabinet & Voicing – A rigid, low-resonance enclosure with curved side panels minimizes standing waves, allowing the speaker to produce deep, controlled bass while preserving tonal neutrality and dynamic realism at high playback levels.
• Specifications – Nominal impedance 4 ohms, sensitivity approximately 90 dB, frequency response around 28 Hz–60 kHz, recommended amplifier power 50–300 W, optimized for high-current solid-state or quality tube amplification.
• Dimensions – Each speaker measures approximately 400 mm wide × 1,154 mm high × 530 mm deep, designed as a full-scale reference floorstander suitable for medium to large dedicated listening rooms.
• Weight – Each unit weighs roughly 95 kg, reflecting extensive internal bracing and premium materials that contribute to mechanical stability, resonance control, and consistent acoustic performance.
For Prices LoginTAD Evolution One TX
For Prices Login -
Luxman M-900u Ultimate
• Overview – Luxman M-900u Ultimate, released in 2013, is a solid-state Class AB stereo power amplifier engineered for extreme current delivery, tonal neutrality, and absolute control over demanding loudspeaker loads.
• Amplifier Architecture – Designed with Luxman’s ODNF 4.0 feedback circuitry, it delivers exceptional speed, ultra-low distortion, and natural musical flow while preserving dynamic contrast and micro-detail across complex recordings.
• System Authority – Luxman M-900u Ultimate excels in large-scale systems, providing effortless drive, deep bass grip, and expansive soundstaging, making it ideal for reference loudspeakers with challenging impedance characteristics.
• Specifications – Rated at 300 watts per channel into 8 ohms and 600 watts into 4 ohms, featuring high damping factor, wide bandwidth response, and fully discrete circuitry for uncompromised signal integrity.
• Dimensions – Approx. 467 mm (W) × 226 mm (H) × 485 mm (D), housed in a substantial chassis with thick aluminium panels and optimized internal layout for thermal stability and vibration control.
• Weight – Approximately 48 kg, reflecting massive transformers, large capacitor banks, and Luxman’s uncompromising mechanical construction required for sustained high-power performance.
For Prices LoginLuxman M-900u Ultimate
For Prices Login -
Luxman L-509X
• Flagship Integrated Design – The Luxman L-509X is a Class AB solid-state integrated amplifier with premium preamp, DAC-ready connectivity options, and precision volume control, delivering exceptional transparency and musical refinement.
• Advanced Circuit Topology – Featuring Luxman’s ODNF 4.0 technology and robust current delivery, the Luxman L-509X ensures low distortion, improved microdynamics, and authoritative grip over demanding loudspeakers.
• Premium Build Quality – Luxman L-509X showcases meticulous Japanese craftsmanship, including a reinforced chassis, precision meters, and optimized internal layout for noise reduction and long-term performance stability.
• Versatile System Integration – With high-grade line inputs, phono stage, and flexible system configuration, the amplifier accommodates both analog sources and modern setups while maintaining the signature Luxman sonic warmth.
• Dimensions – Luxman L-509X Measures approximately 440 mm (W) × 193 mm (H) × 463 mm (D), fitting comfortably into high-end audio racks while allowing proper ventilation.
• Weight – Weighs about 29.3 kg, reflecting its substantial power supply, robust transformers, and vibration-controlled chassis structure designed for maximum sonic purity.
For Prices LoginLuxman L-509X
For Prices Login -
Luxman MQ-88uC
• Luxman MQ-88uC – The Luxman MQ-88uC is a Class AB vacuum-tube power amplifier (released 2019), using KT88 output tubes to deliver refined musicality, low distortion, and Luxman’s signature warm yet articulate presentation.
• Premium Tube Circuitry – The Luxman MQ-88uC employs a Mullard-inspired circuit with meticulous point-to-point wiring, achieving exceptional linearity, wide bandwidth, and effortless drive with superb harmonic accuracy and midrange richness.
• Precision Engineering – With stabilized power regulation, highly shielded transformers, and Luxman’s proprietary LECUA attenuation architecture, the MQ-88uC ensures ultra-quiet operation and consistent performance even with demanding loudspeakers.
• Build Quality – The amplifier’s classic Japanese craftsmanship includes a rigid chassis, custom EI-core transformers, and precision-selected components that collectively enhance stability, tonal refinement, and operational longevity.
• Dimensions – Approx. 440 mm (W) × 184 mm (H) × 230 mm (D), compact for a tube power amplifier while preserving optimal internal airflow and layout.
• Weight – Roughly 16–18 kg, reflecting its robust transformer assembly, steel chassis, and premium tube complement.
For Prices LoginLuxman MQ-88uC
For Prices Login -
SME 3012R Tonearm
• Product Overview – SME 3012R Tonearm, released in 1989, is a precision-engineered 12-inch tonearm designed for high-mass moving-coil cartridges, delivering superb tracking stability, tonal density, and classic SME mechanical refinement.
• Engineering Design – Precision knife-edge bearings, detachable headshell, and rigid magnesium arm tube ensure low resonance behavior, excellent groove tracing, and stable performance with low-compliance cartridges in high-end analog systems.
• Vinyl Playback Performance – The extended 12-inch geometry reduces tracking error and distortion, producing expansive soundstage depth, improved bass authority, and smooth midrange presentation prized by experienced vinyl enthusiasts.
• Specifications – Effective length approximately 308.8 mm, effective mass around 12 g, detachable SME headshell interface, dynamic balance system, and adjustable VTA, azimuth, and bias for precise cartridge optimization.
• Dimensions – Overall length approximately 435 mm, mounting distance 295.6 mm, with substantial base assembly designed for compatibility with classic and modern high-mass turntable plinths.
• Weight – Approximate total mass of 1.1 kg including headshell and base, contributing to mechanical stability, vibration control, and consistent tracking across a wide range of vinyl pressings.
For Prices LoginSME 3012R Tonearm
For Prices Login -
Luxman L550
• Product Overview – The Luxman L550, released in 1982, is a pure Class A solid-state integrated amplifier celebrated for its rich tonal warmth, precise control, and exceptionally musical presentation across diverse loudspeaker systems.
• Signature Luxman Sound – Known for its fluid midrange and refined harmonic structure, the Luxman L550 delivers highly engaging musicality that appeals to audiophiles seeking natural detail and effortless coherence.
• Classic Engineering – The Luxman L550 showcases meticulous Japanese craftsmanship, employing hand-selected components and a dual-mono layout to improve channel separation, enhance resolution, and reinforce tonal stability during dynamic passages.
• System Synergy – The Luxman L550 integrates seamlessly into both modern and vintage systems, offering consistent drive, stable performance, and excellent pairing flexibility with sensitive or moderately demanding speakers.
• Dimensions – Approx. 460 mm (W) × 170 mm (H) × 455 mm (D), designed to fit standard audio racks while maintaining adequate ventilation for Class A heat dissipation.
• Weight – Around 25 kg, featuring a robust transformer and solid chassis construction that enhances mechanical stability and minimizes resonance intrusion.
For Prices LoginLuxman L550
For Prices Login -
Harmonix SYN 100 Spikes and RF909x Spike Base
• Product Overview – Harmonix SYN 100 Spikes and RF909x Spike Base, released in the mid-2000s, are vibration control accessories designed to optimize mechanical grounding, resonance dissipation, and tonal balance in high-end audio systems.
• Tuning Philosophy – Developed using Harmonix’s tuning-based approach, the combination controls energy flow rather than fully isolating components, preserving musicality, timing accuracy, and natural harmonic structure.
• System Enhancement – Harmonix SYN 100 Spikes and RF909x Spike Base improve focus, bass articulation, and soundstage stability when used under loudspeakers, racks, or electronics, especially in revealing high-resolution systems.
• Specifications – Precision-machined metal spikes with matched base interfaces, resonance-tuned materials, point-contact energy transfer, and compatibility with most speaker and rack threaded inserts for universal audiophile applications.
• Dimensions – Individual spike height is approximately 25 mm, with RF909x bases measuring roughly 50 mm in diameter, allowing discreet placement while maintaining effective mechanical coupling.
• Weight – Each spike and base set weighs approximately 150–200 g, providing sufficient mass for stability while supporting controlled resonance behavior and consistent component grounding.
For Prices Login -
Harmonix XDC-2 Power Cable (1.5m)
• Overview – Harmonix XDC-2 Power Cable, released in the early 2000s, is a Japanese audiophile-grade power cable designed to prioritise tonal naturalness, musical flow, and noise reduction over sheer current delivery.
• Design Philosophy – Developed using Harmonix’s tuning-by-ear approach, the cable focuses on resonance control, material synergy, and vibration damping to achieve a relaxed, organic presentation across analog and digital components.
• Sonic Performance – Harmonix XDC-2 Power Cable is renowned for smooth treble, rich midrange tonality, and coherent timing, making it especially attractive for tube systems and musically voiced solid-state equipment.
• Specifications – High-purity copper conductors, moderate gauge design, carefully selected dielectric materials, effective mechanical damping, and high-quality connectors optimized for stable contact and consistent AC power transfer.
• Dimensions – Commonly supplied in approximately 1.5 m length, featuring a flexible outer jacket that allows easy routing while maintaining consistent electrical and mechanical characteristics.
• Weight – Approximately 0.9 kg per cable, reflecting dense conductor materials and internal damping without excessive stiffness or stress on component IEC sockets.
For Prices LoginHarmonix XDC-2 Power Cable (1.5m)
For Prices Login
Harmonix is a Japanese audio brand specialising in system tuning accessories focused on resonance control, mechanical grounding, and vibrational optimisation. The brand approaches audio reproduction as a holistic system, recognising that mechanical behaviour and energy flow play a critical role in overall sound quality.
Harmonix products include cables, tuning devices, and isolation accessories designed to fine-tune tonal balance and system coherence. Because these products are based on physical principles rather than rapidly changing technology, pre-owned Harmonix items remain highly relevant when properly maintained. Many enthusiasts use Harmonix products incrementally to refine established systems rather than replacing core components.
Across Singapore, Malaysia, and Southeast Asia, Harmonix appeals to experienced audiophiles seeking subtle but meaningful system optimisation. On SoundTribeAsia, Harmonix products — new and pre-owned — are listed by verified dealers, offering transparent sourcing and trusted access through a curated regional marketplace.