• Carver CM-1090 Integrated Amplifier

    •⁠  Overview – The Carver CM-1090 Integrated Amplifier, released circa 1986, is a solid state Class AB integrated amplifier delivering high-current output with built-in phono stage and comprehensive tone controls.

    •⁠  Power & Performance – Rated at 100 watts per channel into 8 ohms, the Carver CM-1090 Integrated Amplifier offers dynamic headroom and strong low-frequency grip, driving a wide range of loudspeakers with confidence.

    •⁠  Connectivity & Features – Featuring moving magnet phono input, multiple line-level inputs, tape monitoring, pre-out/main-in jumpers, and full tone control adjustments, it supports flexible system integration for vinyl and digital sources.

    •⁠  Specifications – Solid state Class AB design, 100W per channel into 8Ω, frequency response 20Hz–20kHz ±0.2dB, total harmonic distortion around 0.05%, damping factor above 100, robust linear power supply.

    •⁠  Dimensions – Approximate dimensions are 483 mm wide × 140 mm high × 380 mm deep, reflecting its classic full-width chassis and substantial internal transformer layout.

    •⁠  Weight – Weighing approximately 14–16 kg, the amplifier’s mass supports stable heat dissipation and power supply integrity for sustained high-output listening sessions.

  • Tannoy Yorkminster SE Prestige

    Tannoy Yorkminster SE Prestige

    Enclosure Type: 2-way twin rear-ported

    • Recommended Amplifier: 50 – 225W

    • Power Handling: 150W

    • Frequency Response: 23Hz – 22kHz

    • Crossover Frequency: 1.1kHz

    • Crossover Type: Bi-wired, hand-wired passive, time-compensated 2nd order LF & HF

    • Sensitivity: 95dB

    • Impedance: 8 Ohms

    • Internal Volume: 200 Litres

    • HF: 51mm (2”) aluminium alloy dome, Alnico magnet, Pepperpot Waveguide™

    • LF: 300mm (12”) treated paper pulp cone, HE twin-roll fabric surround, 52mm (2”) voice coil

    • Adjustments: ±3dB over 1kHz to 22kHz, +2dB to –6dB per octave (5kHz – 22kHz slope)

    • Dimensions (W x H x D): 620 × 1080 × 447 mm

    • Weight: 61.5kg each

  • Tannoy TD10

    •⁠  Classic Dual Concentric Design – Tannoy TD10, released in the mid-1990s, features the renowned Dual Concentric driver, delivering point-source coherence, precise imaging, and natural tonal balance prized by experienced audiophiles.

    •⁠  Coherent Soundstage Performance – The Tannoy TD10 excels in phase accuracy and timing, producing a holographic stereo image with stable center focus, realistic scale, and effortless musical flow across diverse listening genres.

    •⁠  High Sensitivity Efficiency – Designed for compatibility with both tube and solid-state amplification, this loudspeaker offers high sensitivity and controlled impedance, allowing dynamic expression even with moderate-powered amplifiers.

    •⁠  Specifications – Nominal impedance is 8 ohms with sensitivity around 92 dB, using a 10-inch Dual Concentric driver, wide frequency response, and front-ported cabinet for controlled low-frequency extension.

    •⁠  Dimensions – Approx. 1,000 mm (H) × 360 mm (W) × 340 mm (D), providing a substantial cabinet volume optimized for bass authority while remaining suitable for medium to large listening rooms.

    •⁠  Weight – Each speaker weighs approximately 32–35 kg, reflecting robust cabinet construction designed to minimize resonance and support stable, vibration-free driver performance.

    Tannoy TD10

    For Prices Login
  • Siltech Ruby Mountain 2 Power Cable (1.5m)

    •⁠  Overview – Siltech Ruby Mountain 2 Power Cable, released in 2002, is a high-end power cord engineered to reduce noise, improve current delivery, and enhance musical clarity in reference audio systems.

    •⁠  Conductor Technology – Utilises Siltech’s proprietary G7 silver-gold alloy conductors with advanced dielectric insulation, delivering low resistance, excellent conductivity, and superior preservation of micro-dynamics and tonal purity.

    •⁠  Sonic Performance – Siltech Ruby Mountain 2 Power Cable delivers a quieter noise floor, improved bass authority, enhanced midrange texture, and refined treble extension, benefiting amplifiers, source components, and digital front ends.

    •⁠  Specifications – Features multi-strand G7 silver-gold conductors, heavy shielding for EMI and RFI rejection, high-current capability up to 16A, and premium connectors ensuring secure contact and consistent power transfer.

    •⁠  Dimensions – Typically supplied in 2.0 m length, with a thick, flexible jacket designed for durability and ease of routing in high-end audio racks and power distribution setups.

    •⁠  Weight – Approximately 1.0 kg for a 2.0 m cable, reflecting dense conductor geometry, advanced shielding layers, and robust connector construction.

  • Acoustic Signature Manfred Turnturntable

    •⁠  Overview – Acoustic Signature Manfred Turntable, released in 2015, is a high-mass belt-drive turntable engineered for extreme rotational stability, ultra-low noise, and reference-grade analogue playback performance.

    •⁠  Drive Architecture – Built around a multi-motor belt-drive system and Acoustic Signature’s proprietary bearing design, it delivers exceptional speed consistency, deep black backgrounds, and effortless musical flow with demanding vinyl pressings.

    •⁠  Construction Quality – The Acoustic Signature Manfred Turntable features a massive aluminium platter and precision-machined chassis, providing outstanding resonance control and mechanical grounding for cartridges to extract maximum groove information.

    •⁠  Specifications – High-mass aluminium platter, inverted sintered bronze bearing, multi-motor belt drive, electronic speed control for 33/45 RPM, ultra-low wow and flutter, and compatibility with a wide range of premium tonearms.

    •⁠  Dimensions – Approx. 480 mm (W) × 170 mm (H) × 380 mm (D), offering a substantial footprint designed to support heavy platter mass and multiple motor assemblies while fitting standard high-end equipment racks.

    •⁠  Weight – Approximately 39 kg without tonearm, reflecting the turntable’s extreme mass design philosophy focused on vibration suppression, speed accuracy, and long-term mechanical stability.

  • NBS Omega IV Speaker Cable (2.8m)

    •⁠  Product Overview – NBS Omega IV Speaker Cable, released in the early 2010s, is a flagship reference speaker cable designed to maximize signal purity, dynamic realism, and tonal density in ultra-high-end audio systems.

    •⁠  Conductor & Dielectric Design – Utilizing NBS’s proprietary rectangular solid-core conductors and advanced dielectric materials, the cable minimizes skin effect, phase distortion, and energy storage for superior coherence and musical flow.

    •⁠  Sonic Performance – NBS Omega IV Speaker Cable delivers exceptional soundstage scale, explosive dynamics, and profound low-frequency authority while preserving microdetail, harmonic richness, and natural timbre across complex recordings.

    •⁠  Specifications – Ultra-low resistance and inductance geometry, heavy-gauge multi-conductor architecture, high-current capability, and precision-terminated spades or bananas optimized for reference amplifiers and full-range loudspeakers.

    •⁠  Dimensions – Available in various custom lengths, typically supplied in 2.0–3.0 meter stereo pairs, with substantial cable diameter reflecting its complex internal conductor and shielding structure.

    •⁠  Weight – Approximately 4–5 kg per stereo pair depending on length, indicating massive conductor mass, dense dielectric layering, and mechanically damped outer jackets.

  • Tannoy Eyris DC3

    Overview – The Tannoy Eyris DC3, released in 2002, is a compact floorstanding loudspeaker featuring Tannoy’s renowned Dual Concentric driver technology for seamless point-source imaging and exceptional coherence across the frequency spectrum.

    Dual Concentric Precision – The Eyris DC3 delivers outstanding midrange clarity and precise spatial projection, benefiting from Tannoy’s coaxial driver layout that ensures uniform dispersion and improved timing accuracy in real-world rooms.

    Controlled Bass Performance – Designed with a well-tuned cabinet and rear reflex port, the Tannoy Eyris DC3 produces articulate low frequencies with strong extension while maintaining tight control suitable for both music and home audio setups.

    Premium Construction – The Eyris DC3 employs high-rigidity enclosures with real-wood veneers, low-resonance panels, and quality crossover components, enhancing transparency and long-term performance stability.

    Dimensions – Approx. 926 mm (H) × 204 mm (W) × 277 mm (D), providing an elegant footprint that fits comfortably into medium-sized listening environments.

    Weight – Approx. 16.5 kg per speaker, offering solid cabinet mass for reduced vibration and improved driver accuracy.

  • Genesis IM5200

    Overview – The Genesis IM5200, released in mid-2005, is a compact high-end loudspeaker system featuring servo-controlled bass and ribbon tweeters, engineered to deliver exceptional coherence, speed, and holographic imaging.

    Ribbon/Servo Performance – The Genesis IM5200 uses a proprietary ribbon tweeter and active servo-bass system, producing extended highs, low distortion, and fast transient response ideal for resolving complex musical passages.

    Acoustic Engineering – Designed with rigid cabinet construction and carefully tuned internal damping, the Genesis IM5200 minimizes standing waves while enhancing midrange purity and instrument separation across a wide listening space.

    System Synergy – The Genesis IM5200 pairs effectively with neutral solid-state amplification, and the Genesis IM5200 reveals system upgrades easily, making it an excellent choice for long-term high-fidelity system building.

    Dimensions – Approx. 965 mm (H) × 305 mm (W) × 380 mm (D). Its precise footprint ensures strong bass alignment while fitting comfortably into most audiophile rooms.

    Weight – Each unit weighs around 22–24 kg, providing cabinet stability and improved resonance control for greater clarity and dynamic accuracy.

    Genesis IM5200

    For Prices Login

Main Menu