-
Apogee Stage Speakers
• Product Overview – The Apogee Stage Speakers, released circa 1990, are full-range planar ribbon loudspeakers designed for high-resolution, low-distortion playback, delivering the open, fast transient response Apogee is renowned for.
• Ribbon Loudspeaker Performance – Featuring true ribbon midrange and tweeter elements, these speakers deliver lightning-fast transients, exceptional clarity, and expansive soundstaging that rewards high-quality amplification and careful system matching.
• Design & Sonic Character – The Apogee Stage Speakers use a dipole radiation pattern with large ribbon surfaces, producing natural tonal balance, deep image layering, and lifelike vocal reproduction unmatched by conventional dynamic driver designs.
• Specifications – Nominal impedance is approximately 3–4 ohms with sensitivity around 86 dB, requiring high-current amplifiers capable of stable low-impedance drive to unlock their full dynamic and tonal potential.
• Dimensions – Each speaker measures approximately 1220 mm (H) × 560 mm (W) × 60 mm (D), with a slim vertical profile that still demands adequate floor space and thoughtful room placement.
• Weight – Each speaker weighs roughly 32 kg, reflecting the substantial ribbon assemblies, rigid frame construction, and damping required for mechanical stability and accurate ribbon driver operation.
For Prices LoginApogee Stage Speakers
For Prices Login -
Tannoy Yorkminster SE Prestige
Tannoy Yorkminster SE Prestige
Enclosure Type: 2-way twin rear-ported
• Recommended Amplifier: 50 – 225W
• Power Handling: 150W
• Frequency Response: 23Hz – 22kHz
• Crossover Frequency: 1.1kHz
• Crossover Type: Bi-wired, hand-wired passive, time-compensated 2nd order LF & HF
• Sensitivity: 95dB
• Impedance: 8 Ohms
• Internal Volume: 200 Litres
• HF: 51mm (2”) aluminium alloy dome, Alnico magnet, Pepperpot Waveguide™
• LF: 300mm (12”) treated paper pulp cone, HE twin-roll fabric surround, 52mm (2”) voice coil
• Adjustments: ±3dB over 1kHz to 22kHz, +2dB to –6dB per octave (5kHz – 22kHz slope)
• Dimensions (W x H x D): 620 × 1080 × 447 mm
• Weight: 61.5kg each
For Prices LoginTannoy Yorkminster SE Prestige
For Prices Login -
SME 3012R Tonearm
• Product Overview – SME 3012R Tonearm, released in 1989, is a precision-engineered 12-inch tonearm designed for high-mass moving-coil cartridges, delivering superb tracking stability, tonal density, and classic SME mechanical refinement.
• Engineering Design – Precision knife-edge bearings, detachable headshell, and rigid magnesium arm tube ensure low resonance behavior, excellent groove tracing, and stable performance with low-compliance cartridges in high-end analog systems.
• Vinyl Playback Performance – The extended 12-inch geometry reduces tracking error and distortion, producing expansive soundstage depth, improved bass authority, and smooth midrange presentation prized by experienced vinyl enthusiasts.
• Specifications – Effective length approximately 308.8 mm, effective mass around 12 g, detachable SME headshell interface, dynamic balance system, and adjustable VTA, azimuth, and bias for precise cartridge optimization.
• Dimensions – Overall length approximately 435 mm, mounting distance 295.6 mm, with substantial base assembly designed for compatibility with classic and modern high-mass turntable plinths.
• Weight – Approximate total mass of 1.1 kg including headshell and base, contributing to mechanical stability, vibration control, and consistent tracking across a wide range of vinyl pressings.
For Prices LoginSME 3012R Tonearm
For Prices Login -
Tannoy TD10
• Classic Dual Concentric Design – Tannoy TD10, released in the mid-1990s, features the renowned Dual Concentric driver, delivering point-source coherence, precise imaging, and natural tonal balance prized by experienced audiophiles.
• Coherent Soundstage Performance – The Tannoy TD10 excels in phase accuracy and timing, producing a holographic stereo image with stable center focus, realistic scale, and effortless musical flow across diverse listening genres.
• High Sensitivity Efficiency – Designed for compatibility with both tube and solid-state amplification, this loudspeaker offers high sensitivity and controlled impedance, allowing dynamic expression even with moderate-powered amplifiers.
• Specifications – Nominal impedance is 8 ohms with sensitivity around 92 dB, using a 10-inch Dual Concentric driver, wide frequency response, and front-ported cabinet for controlled low-frequency extension.
• Dimensions – Approx. 1,000 mm (H) × 360 mm (W) × 340 mm (D), providing a substantial cabinet volume optimized for bass authority while remaining suitable for medium to large listening rooms.
• Weight – Each speaker weighs approximately 32–35 kg, reflecting robust cabinet construction designed to minimize resonance and support stable, vibration-free driver performance.
For Prices LoginTannoy TD10
For Prices Login -
Fostex FE208
• Product Overview – Fostex FE208, released in 2002, is a high-sensitivity full-range driver designed for horn and back-loaded enclosures, prized for coherence, speed, and lifelike midrange reproduction.
• Sound Character – Designed for single-driver enthusiasts, this unit delivers exceptional immediacy, dynamic expression, and phase coherence, making it ideal for low-power tube amplifiers and minimalist signal paths.
• Driver Design – The FE208 features a lightweight paper cone, whizzer cone, and powerful ferrite motor system, enabling fast transient response and extended midrange clarity without crossover-induced phase distortion.
• Specifications – Nominal impedance is 8 ohms with sensitivity around 96 dB/W/m, supporting wide bandwidth performance and high efficiency, particularly suited for horn-loaded or high-efficiency loudspeaker designs.
• Dimensions – Driver diameter approximately 208 mm with standard mounting depth suitable for horn or large cabinet designs, allowing flexible integration into custom loudspeaker enclosures.
• Weight – Each driver weighs approximately 3 kg, with a rigid frame and motor assembly contributing to mechanical stability and controlled resonance behavior.
For Prices LoginFostex FE208
For Prices Login -
Tannoy Eyris DC3
• Overview – The Tannoy Eyris DC3, released in 2002, is a compact floorstanding loudspeaker featuring Tannoy’s renowned Dual Concentric driver technology for seamless point-source imaging and exceptional coherence across the frequency spectrum.
• Dual Concentric Precision – The Eyris DC3 delivers outstanding midrange clarity and precise spatial projection, benefiting from Tannoy’s coaxial driver layout that ensures uniform dispersion and improved timing accuracy in real-world rooms.
• Controlled Bass Performance – Designed with a well-tuned cabinet and rear reflex port, the Tannoy Eyris DC3 produces articulate low frequencies with strong extension while maintaining tight control suitable for both music and home audio setups.
• Premium Construction – The Eyris DC3 employs high-rigidity enclosures with real-wood veneers, low-resonance panels, and quality crossover components, enhancing transparency and long-term performance stability.
• Dimensions – Approx. 926 mm (H) × 204 mm (W) × 277 mm (D), providing an elegant footprint that fits comfortably into medium-sized listening environments.
• Weight – Approx. 16.5 kg per speaker, offering solid cabinet mass for reduced vibration and improved driver accuracy.
For Prices LoginTannoy Eyris DC3
For Prices Login
