-
MBL N51 Integrated Amplifier
Specifications: MBL N51 Integrated Amplifier
• Type: Integrated amplifier
• Output Power: 380 W per channel (4 Ω), 200 W per channel (8 Ω)
• Class of Operation: Class A / AB hybrid
• Inputs: 3 × RCA (unbalanced), 2 × XLR (balanced)
• Outputs: 1 × RCA pre-out, 1 × XLR pre-out
• Frequency Response: 0.3 Hz – 330 kHz (-3 dB)
• THD: < 0.01% • Damping Factor: 200
• Input Impedance: 47 kΩ
• Dimensions (W × H × D): 45 × 17 × 40 cm
• Weight: 35 kg
• Made in Germany
$ 9,994.92$ 10,775.78MBL N51 Integrated Amplifier
$ 9,994.92$ 10,775.78 -
Apogee Stage Speakers
• Product Overview – The Apogee Stage Speakers, released circa 1990, are full-range planar ribbon loudspeakers designed for high-resolution, low-distortion playback, delivering the open, fast transient response Apogee is renowned for.
• Ribbon Loudspeaker Performance – Featuring true ribbon midrange and tweeter elements, these speakers deliver lightning-fast transients, exceptional clarity, and expansive soundstaging that rewards high-quality amplification and careful system matching.
• Design & Sonic Character – The Apogee Stage Speakers use a dipole radiation pattern with large ribbon surfaces, producing natural tonal balance, deep image layering, and lifelike vocal reproduction unmatched by conventional dynamic driver designs.
• Specifications – Nominal impedance is approximately 3–4 ohms with sensitivity around 86 dB, requiring high-current amplifiers capable of stable low-impedance drive to unlock their full dynamic and tonal potential.
• Dimensions – Each speaker measures approximately 1220 mm (H) × 560 mm (W) × 60 mm (D), with a slim vertical profile that still demands adequate floor space and thoughtful room placement.
• Weight – Each speaker weighs roughly 32 kg, reflecting the substantial ribbon assemblies, rigid frame construction, and damping required for mechanical stability and accurate ribbon driver operation.
$ 1,249.37Apogee Stage Speakers
$ 1,249.37 -
SME 3012R Tonearm
• Product Overview – SME 3012R Tonearm, released in 1989, is a precision-engineered 12-inch tonearm designed for high-mass moving-coil cartridges, delivering superb tracking stability, tonal density, and classic SME mechanical refinement.
• Engineering Design – Precision knife-edge bearings, detachable headshell, and rigid magnesium arm tube ensure low resonance behavior, excellent groove tracing, and stable performance with low-compliance cartridges in high-end analog systems.
• Vinyl Playback Performance – The extended 12-inch geometry reduces tracking error and distortion, producing expansive soundstage depth, improved bass authority, and smooth midrange presentation prized by experienced vinyl enthusiasts.
• Specifications – Effective length approximately 308.8 mm, effective mass around 12 g, detachable SME headshell interface, dynamic balance system, and adjustable VTA, azimuth, and bias for precise cartridge optimization.
• Dimensions – Overall length approximately 435 mm, mounting distance 295.6 mm, with substantial base assembly designed for compatibility with classic and modern high-mass turntable plinths.
• Weight – Approximate total mass of 1.1 kg including headshell and base, contributing to mechanical stability, vibration control, and consistent tracking across a wide range of vinyl pressings.
$ 2,873.54SME 3012R Tonearm
$ 2,873.54 -
Fostex FE208
• Product Overview – Fostex FE208, released in 2002, is a high-sensitivity full-range driver designed for horn and back-loaded enclosures, prized for coherence, speed, and lifelike midrange reproduction.
• Sound Character – Designed for single-driver enthusiasts, this unit delivers exceptional immediacy, dynamic expression, and phase coherence, making it ideal for low-power tube amplifiers and minimalist signal paths.
• Driver Design – The FE208 features a lightweight paper cone, whizzer cone, and powerful ferrite motor system, enabling fast transient response and extended midrange clarity without crossover-induced phase distortion.
• Specifications – Nominal impedance is 8 ohms with sensitivity around 96 dB/W/m, supporting wide bandwidth performance and high efficiency, particularly suited for horn-loaded or high-efficiency loudspeaker designs.
• Dimensions – Driver diameter approximately 208 mm with standard mounting depth suitable for horn or large cabinet designs, allowing flexible integration into custom loudspeaker enclosures.
• Weight – Each driver weighs approximately 3 kg, with a rigid frame and motor assembly contributing to mechanical stability and controlled resonance behavior.
$ 1,171.28Fostex FE208
$ 1,171.28 -
MBL N15 Monoblock
• Product Overview – MBL N15 Monoblock, released in 2019, is a solid-state Class AB monaural power amplifier delivering high-current authority, extreme stability, and effortless control for reference-grade loudspeaker systems.
• Amplification Architecture – Fully balanced signal topology with oversized power supplies ensures low noise, exceptional channel separation, and unwavering performance under demanding loads, reflecting MBL’s Noble Line engineering philosophy.
• Sonic Performance – MBL N15 Monoblock delivers immense dynamic headroom, deep bass grip, and expansive soundstage reproduction, maintaining tonal neutrality and composure even at high listening levels.
• Specifications – Rated at approximately 200 W into 8 ohms and 400 W into 4 ohms, with high-current output stages optimized for difficult speaker impedances and wide bandwidth signal handling.
• Dimensions – Each chassis measures approximately 480 mm (W) × 170 mm (H) × 480 mm (D), designed to integrate seamlessly into high-end audio racks while supporting robust internal power architecture.
• Weight – Each monoblock weighs approximately 33 kg, reflecting heavy-duty transformers, extensive heatsinking, and rigid construction essential for long-term thermal stability and sonic consistency.
$ 22,488.58MBL N15 Monoblock
$ 22,488.58 -
MBL C51 Integrated Amplifier
• MBL C51 Integrated Amplifier – This premium Class AB integrated amplifier combines high-current power delivery with MBL’s signature refinement, offering holographic imaging, smooth dynamics, and authoritative control suitable for demanding loudspeaker systems.
• Advanced Pre/Power Architecture – The C51 uses discrete circuitry, ultra-low-noise voltage regulation, and precision volume control to ensure exceptional signal purity, delivering lifelike tonal accuracy and outstanding microdynamic resolution.
• High-Current Output Performance – MBL C51 Integrated Amplifier is rated at 180W into 8Ω and 300W into 4Ω, the C51 provides excellent stability, grip, and transient impact, enabling it to drive complex speaker loads effortlessly and musically.
• Premium Noble Line Engineering – Borrowing from MBL’s flagship designs, the C51 features robust internal layout, resonance-optimized chassis construction, and meticulous parts selection to ensure consistent high-end performance.
• Dimensions – Approx. 440 mm (W) × 183 mm (H) × 390 mm (D). The sculpted Noble Line chassis provides superior mechanical stability and ventilation for reliable long-term operation.
• Weight – Approximately 28 kg, offering excellent mass damping and structural rigidity that enhances noise reduction and overall sonic refinement.
$ 6,871.51MBL C51 Integrated Amplifier
$ 6,871.51 -
MBL N11 Preamplifier and N21 Stereo Power Amplifier
• MBL N11 Preamplifier and N21 Stereo Power Amplifier – This flagship Noble Line pairing delivers exceptional refinement, with the N21 operating in Class AB to provide authoritative drive, holographic imaging, and MBL’s signature musical realism.
• Ultra-Low-Noise Preamplifier Design – The MBL N11 employs discrete gain stages, precision resistive ladder volume control, and advanced isolation topology, ensuring absolute signal purity, superior dynamic contrast, and effortless tonal accuracy.
• High-Current Power Capability – The MBL N21 outputs 250W into 8Ω and doubles into 4Ω, offering exceptional control, stability, and dynamic reach, allowing demanding loudspeakers to perform with scale and composure.
• Noble Line System Synergy – When paired, the N11 and N21 deliver seamless coherence, expansive sound staging, and deep microdynamic detail, embodying MBL’s renowned ability to recreate live, full-bodied, three-dimensional musical presence.
• Dimensions – N11: approx. 440 × 92 × 390 mm (W × H × D).
N21: approx. 440 × 210 × 460 mm. Both share the distinctive Noble Line geometry and robust internal architecture.
• Weight – N11 approx. 12 kg; N21 approx. 38 kg. Heavy, resonance-controlled chassis construction enhances mechanical stability, lowers noise, and maximizes overall sonic performance.
$ 20,146.02 -
MBL 116F Radialstrahler Loudspeaker
• Omnidirectional Loudspeaker Overview – The MBL 116F Radialstrahler Loudspeaker delivers full-range 360-degree radiation with exceptional coherence, holographic staging and organic musical flow, offering a truly immersive high-end listening experience for advanced systems.
• Radialstrahler Driver Architecture – Using MBL’s patented Radialstrahler transducers, the design produces uniform dispersion, natural tonal density and lifelike spatial imaging, with one mention of MBL 116F Radialstrahler Loudspeaker across the system description.
• Bass System & Dynamic Behaviour – Featuring dedicated woofers and a powerful low-frequency chamber, the speaker provides deep, controlled bass, outstanding transient speed and exceptional dynamic scaling, with one additional mention of MBL 116F Radialstrahler Loudspeaker.
• Cabinet Engineering & Vibration Control – The rigid, multi-chamber enclosure minimises resonances while supporting seamless driver integration, allowing improved clarity, stable imaging and highly accurate reproduction across complex acoustic environments.
• Product Dimensions – Each loudspeaker measures approximately 1,200 mm (H) × 310 mm (W) × 430 mm (D), offering a sculptural footprint designed for ideal dispersion and room placement flexibility.
• Product Weight – Weighing around 50–55 kg per speaker, the substantial cabinet structure enhances mechanical stability, reduces coloration and supports superior bass definition and overall acoustic performance.
$ 20,926.87MBL 116F Radialstrahler Loudspeaker
$ 20,926.87
